检索

标题
作者
Microstructure and Mechanical Properties of Light Cellular Constructions Made of a VT6 Alloy by Selective Laser Melting
Sufiyarov V., Borisov E., Polozov I., Sokolova V., Popovich A.
Structure and Mechanical Properties of the Layered Composites Made of Multicomponent Niobium Alloys and Hardening Silicon–Carbon Compounds Formed by Solid-Phase Sintering
Korzhov V., Kiiko V., Zheltyakova I.
Activity of Lanthanum in Zn-Containing Alloys: La–Zn, La–U–Zn, and La–U–Ga–Zn Systems
Volkovich V., Mal’tsev D., Raguzina E., Dedyukhin A., Shchetinskii A., Yamshchikov L.
Mechanisms of Alumina Formation from Metallic Raw Materials under Electrolysis Conditions
Lysenko A., Nalivaiko A.
Change in the Structure and the Properties of Cylindrical Alloy AMg6 Shells in Loading by Glancing Detonation Waves
Brodova I., Smirnov E., Shirinkina I., Astaf’ev V., Yablonskikh T., Koval’ A., Degtyarev A., Shorokhov E.
Estimation of the Delayed Hydride Cracking Resistance of the Pressure Tubes in Nuclear Reactors
Shmakov A., Singh R., Matvienko Y., Kolmakov A.
Iron–Chromium Precursors for Hard-Magnetic Fe–Cr–Co Alloys
Vedmid L., Dorogina G.
Elemental Composition of the Powder Particles Produced by Electric Discharge Dispersion of the Wastes of a VK8 Hard Alloy
Latypov R., Ageev E., Latypova G., Altukhov A., Ageeva E.
Effect of the phase composition on the properties of a complex magnesium alloy at temperatures from –70 to +300°C
Volkova E., Duyunova V., Mostyaev I.
Influence of heat treatment on the efficiency of impact fragmentation of amorphous alloy Fe73.5Cu1Nb3Si13.5B9 ribbons
Kuznetsov P., Samodelkin E., Klimov V., Kashirina A.
Comparative analysis of the reactivity of nickel and a Ni–Re (10 wt %) alloy during direct current polarization in sulfuric acid solutions
Bryukvin V., Skryleva E., Levchuk O., Tsybin O., Bol’shikh A., Kuznetsova O.
Mass Transfer of a Nanocrystalline 5BDSR Alloy during Low-Voltage Electrospark Treatment
Kuznetsov I., Kolomeichenko A.
Amorphous-Alloy-Based Composites Prepared by High-Pressure Torsion
Permyakova I., Blinova E., Shchetinin I., Savchenko E.
Structure of the Al90Y10 Alloy Formed upon Pressure Solidification
Menshikova S., Shirinkina I., Brodova I., Brazhkin V.
Effect of the Cobalt Content and Chromium Alloying on the Structure of the Scale Formed on Structural β-NiAl + γ'-Ni3Al + γ-Ni Alloys (Ni–Al–Co System) at 1300°C
Drozdov A., Povarova K., Bazyleva O., Morozov A., Antonova A., Arginbaeva E., Bulakhtina M., Ashmarin A.
Properties of the Coatings Fabricated by Plasma-Jet Hard-Facing by Dispersed Mechanical Engineering Wastes
Latypov R., Ageev E., Latypova G., Altukhov A., Ageeva E.
Structure and Tribological Properties of B83 Babbit–Based Composite Rods and the Coatings Produced from Them by Arc Surfacing
Bolotova L., Kalashnikov I., Kobeleva L., Katin I., Kolmakov A., Mikheev R., Kobernik N., Podymova N.
Experience of Application of EBW in Producing Welded VT41 Alloy Drums in the Design of an HPC in an Advanced Engine
Bykov Y., Fomichev E., Kashapov O., Kyaramyan K.
Structural heat-resistant β-NiAl + γ′-Ni3Al alloys of the Ni–Al–Co system: II. Oxidation
Povarova K., Drozdov A., Bazyleva O., Morozov A., Antonova A., Arginbaeva E., Alad’ev N., Sirotinkin V.
Effect of deformation and heat treatment on the structure, the mechanical properties, and the fracture characteristics of an ultrafine-grained Zr–1Nb alloy
Vinokurov V., Grabovetskaya G., Stepanova E., Mishin I.
Fatigue strength of a Ti–6Al–4V alloy produced by selective laser melting
Gerov M., Vladislavskaya E., Terent’ev V., Prosvirnin D., Kolmakov A., Antonova O.
Elemental Composition and Microhardness of the Coatings Prepared on Faced Aluminum Alloys by Plasma Electrolytic Oxidation in a Silicate–Alkaline Electrolyte
Kolomeichenko A., Kravchenko I.
Effect of Thermohydrogen Treatment on the Manufacturing and Mechanical Properties of a Heat-Resistant VTI-4 Intermetallic Alloy
Skvortsova S., Pozhoga O., Ovchinnikov A., Orlov A.
Conditions of Air Shot Hardening of VT41 Titanium Alloy Blisk Blades for an Advanced Engine
Yakovlev M., Kyaramyan K., Shirvan’yants G.
Structure and Properties of the Solid-Phase Joints of a Wrought EP975 Nickel Alloy and a Single-Crystal Intermetallic VKNA-25 Alloy Formed by Pressure Welding at a Strain of 24% under the Superplasticity of the EP975 Alloy
Galieva E., Povarova K., Drozdov A., Valitov V.
51 - 75 的 94 信息 << < 1 2 3 4 > >> 

检索提示:

  • 检索的名词区分大小写
  • 常用字词将被忽略
  • 默认情况下只有在查询结果满足所有检索词才返回(例如,隐含AND)
  • 使用OR结合多个检索词,便于查找含有这些检索词的文章,例如education OR research
  • 使用括号来创建更复杂的查询; 例如:archive ((journal OR conference) NOT theses)
  • 使用引号检索一个完整的词组; 例如: "open access publishing"
  • 使用-或者NOT排除一个检索词; 例如:online -politics or online NOT politics
  • 在检索词里使用 *作为通配符匹配任何字符序列; 例如., soci* morality 将符合含有 "sociological" or "societal"的词语
##common.cookie##