期 |
标题 |
文件 |
卷 18, 编号 1 (2024) |
Study of efficiency of the algorithm of acceleration and deceleration control of a wheeled vehicle by means of the accelerator pedal |
(Rus)
|
Klimov A.
|
卷 18, 编号 1 (2024) |
Mobile additional armor protection for a truck |
(Rus)
|
Streltsov R., Mikitenko A., Sukhodoeva A., Samarin I.
|
卷 17, 编号 4 (2023) |
Load mode control of test rigs for rubber-metal vibration isolators |
(Rus)
|
Godzhaev Z., Shekhovtsov V., Lyashenko M., Potapov P., Klementiev E.
|
卷 17, 编号 4 (2023) |
The method of virtual bench tests conducting to analyze the vehicle technical characteristics compatibility to detect and prevent the risk of resonant phenomena in the sprung cab |
(Rus)
|
Maximov R.
|
卷 17, 编号 4 (2023) |
Assessment of influence of considering the flexibility of the front loader frame on the emerging loads in the multibody system |
(Rus)
|
Rubanov P., Goncharov R., Skotnikov G., Gorelov V., Grigoriev V.
|
卷 17, 编号 3 (2023) |
Analysis of prospects for improvement and development of vehicle suspension structures |
(Rus)
|
Martynov E., Potashov I., Bokarev A.
|
卷 17, 编号 3 (2023) |
Definition of parameters of loading modes of the test bench for tractor cabin’s vibration isolators |
(Rus)
|
Gozhaev Z., Shekhovtsov V., Potapov P., Iskaliev A., Yarkina M., Evseeva A.
|
卷 17, 编号 3 (2023) |
Evaluation of the technical and economic efficiency of controlled power distribution in transmissions of all-wheel drive trucks |
(Rus)
|
Keller A., Popov A., Okolnishnikova I.
|
卷 17, 编号 3 (2023) |
Algorithm for forming traction and braking torque settings at the shaft of a traction motor by means of a single pedal |
(Rus)
|
Klimov A.
|
卷 17, 编号 2 (2023) |
Experience in the use of microcontroller platforms and computer technologies in experimental researches of automotive and tractor machinery |
(Rus)
|
Esakov A., Bernatskii V., Esenovskii-Lashkov M.
|
卷 17, 编号 2 (2023) |
Topological optimization of the load-bearing structure of the safety cage |
(Rus)
|
Zhitelev D., Pozdnyakov T., Sulegin D.
|
卷 17, 编号 1 (2023) |
Selection of the analytical dependency for assessment of slipping of the Kirovets K-7 wheeled agricultural tractor |
(Rus)
|
Anisimov N., Efimov E., Dobretsov R., Dmitriev M.
|
卷 17, 编号 1 (2023) |
Towing couplers of a multi-sectional vehicle |
(Rus)
|
Popov I.
|
卷 17, 编号 1 (2023) |
Modern structural and operating materials in development of road-building machines |
(Rus)
|
Degtyareva K.
|
卷 17, 编号 1 (2023) |
Calculation method for determining the heat loss of the air environment when opening the passenger vehicle cabin doors |
(Rus)
|
Gevorkyan A., Prokhorov I., Butarovich D.
|
卷 16, 编号 4 (2022) |
The air exchange rate measuring method by the concentration of carbon dioxide in the vehicle cabin air |
(Rus)
|
Yakunova E.
|
卷 16, 编号 4 (2022) |
Methods of fog control for a vehicle windscreen before vehicle moving off |
(Rus)
|
Ignatiev V., Antoshina V.
|
卷 16, 编号 4 (2022) |
The straight-line stability analysis of the vehicle with the electronic stability control |
(Rus)
|
Eranosyan A.
|
卷 16, 编号 4 (2022) |
The test rigs for motorcycle framework and suspension testing. Durability testing of motorcycles and their components |
(Rus)
|
Kuzmin A., Meshcheryakov D., Eidelman A.
|
卷 16, 编号 3 (2022) |
Prerequisites for the creation of domestic onboard diagnostics tools for the M1 and M2 categories vehicles |
(Rus)
|
Zavoykin V.
|
卷 16, 编号 3 (2022) |
Technical diagnostics of heembedded elements of crane tracks of lifting equipment in machine halls of tunnel escalators |
(Rus)
|
Vatulin Y., Popov V., Dyatlov V.
|
卷 16, 编号 3 (2022) |
Study of the effects of deformation rate and adhesive layer thickness under impact loading on parameters of adhesive joints in a vehicle |
(Rus)
|
Liu Y., Goncharov R., Zuzov V.
|
卷 16, 编号 2 (2022) |
An energy efficiency analysis of the electrodynamic antispin regulation of the city electrobus |
(Rus)
|
Zhileykin M., Klimov A., Maslennikov I.
|
卷 16, 编号 1 (2022) |
Development of a dynamic model of a front loader for the analysis of operational properties and determination of loads acting on its elements |
(Rus)
|
Chichekin I., Nyrkov F., Grigoruev V.
|
卷 16, 编号 1 (2022) |
Mathematical simulation of the automatic control of the tractor power unit |
(Rus)
|
Hoodorozhkov S., Krasilnikov A., Gubachov M.
|
卷 16, 编号 1 (2022) |
Control signal algorithm of the accelerator pedal providing an effective energy consumption by an electrobus traction gear |
(Rus)
|
Zhileykin M., Klimov A., Maslennikov I.
|
卷 16, 编号 1 (2022) |
Validation of the CAE model set for a passenger car suspension according to loading criteria |
(Rus)
|
Kulagin V.
|
1 - 27 的 27 信息 |
|