Issue |
Title |
File |
Vol 62, No 4 (2019) |
Sulfide Oxide Corrosion of Modern Heat-Resistant Alloys |
(Eng)
|
Getsov L.B., Laptev A.B., Puzanov A.I., Shelyapina N.M.
|
Vol 62, No 4 (2019) |
Wear and Erosion Resistance of Aircraft Engine Composite Elements in a Gas Abrasive Flow |
(Eng)
|
Zinin A.V., Dobrovol’skii S.V., Lebedev A.K., Krupennikov V.A., Shevyakov A.O.
|
Vol 62, No 4 (2019) |
Investigation into the Effect of Vibration on the Durability of End Mills at Machining Titanium Alloys |
(Eng)
|
Sazonov M.B., Shvetsov A.N., Safin A.I.
|
Vol 62, No 3 (2019) |
Investigation of the Forming Process of Thin-Walled Parts from a Flat Blank with Minimal Thickness Variation |
(Eng)
|
Dem’yanenko E.G.
|
Vol 62, No 3 (2019) |
Calculation of Labor Intensity in the Context of Pilot Production of Small Aircraft |
(Eng)
|
Sharafeev I.S., Markovtsev V.A.
|
Vol 62, No 3 (2019) |
Electronic Simulation of Single Integrated Structures Made of Polymer Composite Materials with Adhesive Joint |
(Eng)
|
Naumov A.V., Lyudogovskii P.L., Filippova M.S.
|
Vol 62, No 1 (2019) |
Graph Modeling of Data for Assembly Process of GTE Units in Conditions of Production Digitalization |
(Eng)
|
Lyutov A.G., Ryabov Y.V., Akh’yanillin N.I., Davletshin L.I.
|
Vol 62, No 1 (2019) |
Determination of the Folded Core Geometric Characteristics Based on a Flat-Faceted Elementary Module with Translational Symmetry Considering the Material Thickness |
(Eng)
|
Semeshko M.A., Alekseev K.A., Zakiro I.M., Markovtsev V.A.
|
Vol 62, No 1 (2019) |
Analysis of Process Setting Accuracy for Multifunctional CNC-Machines |
(Eng)
|
Yusupov Z.A.
|
Vol 62, No 1 (2019) |
Quality Assurance of Assembling of GTE Threaded Joints by Ultrasonic Treatment upon the Required Strength Criterion |
(Eng)
|
Shuvaev V.G., Nepomiluev V.V., Rykunov A.N., Semenov A.N.
|
Vol 62, No 1 (2019) |
Accounting for Geometric Scatter within Manufacturing Tolerances on the Natural Frequency Values of Compressor Rotor Blade during Its Detuning from Dangerous Resonances |
(Eng)
|
Vasil’ev B.E., Semenov A.V., Sal’nikov A.V., Bortnikov A.D.
|
Vol 62, No 1 (2019) |
Icing Intensity of Passive Organosilicon Anti-Icing Coatings |
(Eng)
|
Danilaev M.P., Bogoslov E.A., Dorogov N.V., Klabukov M.A., Bobina E.A.
|
Vol 62, No 1 (2019) |
Ways to Manage Small-Scale Machine-Building Production |
(Eng)
|
Ivanov V.K.
|
Vol 61, No 3 (2018) |
Dynamic One-Sided Thermal Scanning of Aircraft Composite Fairings |
(Eng)
|
Ryazhskikh A.V., Zaets N.P., Chizhov I.A., Seminikhin O.A.
|
Vol 61, No 3 (2018) |
Development of a Technique to Reduce Porosity in Composite Structures at the Limited Autoclave Pressure |
(Eng)
|
Samipour S.A., Batrakov V.V., Konstantinov D.Y.
|
Vol 61, No 3 (2018) |
Improving the Technology of Rotary Electrochemical Machining of Compressor Blades |
(Eng)
|
Poletaev V.A., Orlov A.A.
|
Vol 61, No 1 (2018) |
Influence of Autoclave Molding Modes and Stack Structure on Porosity of Composite Materials |
(Eng)
|
Batrakov V.V., Petrushenko R.Y., Konstantinov D.Y., Khamidullin O.L.
|
Vol 61, No 1 (2018) |
Determination of Slag Retention Ability of Gating Systems |
(Eng)
|
Izotov V.A., Serebryakov S.P., Shatul’skii A.A.
|
Vol 61, No 1 (2018) |
Gas and Powder Flow Optimization in a Four-Jet Laser Cladding Head |
(Eng)
|
Shpilev A.I., Iskhakov F.R., Nagulin K.Y., Gil’mutdinov A.K.
|
Vol 60, No 4 (2017) |
Modeling of Hybrid Shell Shaping Process in Carbon Fiber Tooling |
(Eng)
|
Shabalin L.P., Sidorov I.N., Sungatullin R.N.
|
Vol 60, No 4 (2017) |
A Technique of Holes Axes Definition in Hidden and Hard-to-Get-to Hardware Zones by Means of Laser Coordinate Measuring Systems |
(Eng)
|
Lyudogovskii P.L., Komkova M.A.
|
Vol 60, No 2 (2017) |
Cyclic folding of composite zigzag structures and calculating of equipment parameters |
(Eng)
|
Khaliulin V.I.
|
Vol 60, No 2 (2017) |
Design of gating systems in production of gas turbine engine blades |
(Eng)
|
Smykov A.F., Moiseev V.S., Chumadin A.S.
|
Vol 60, No 1 (2017) |
An algorithm for calibrating the three-axis magnetometer |
(Eng)
|
Emaletdinova L.Y., Gainutdinova A.V., Gainutdinova T.Y.
|
Vol 60, No 1 (2017) |
Optimization of forming parameters for fiberglass shells of rocket nose cones by a criticality criterion |
(Eng)
|
Urazbakhtin F.A., Kharinova Y.Y., Urazbakhtina A.Y.
|
1 - 25 of 36 Items |
1 2 > >>
|