| 期 |
标题 |
文件 |
| 卷 62, 编号 4 (2019) |
Sulfide Oxide Corrosion of Modern Heat-Resistant Alloys |
(Eng)
|
|
Getsov L., Laptev A., Puzanov A., Shelyapina N.
|
| 卷 62, 编号 4 (2019) |
Wear and Erosion Resistance of Aircraft Engine Composite Elements in a Gas Abrasive Flow |
(Eng)
|
|
Zinin A., Dobrovol’skii S., Lebedev A., Krupennikov V., Shevyakov A.
|
| 卷 62, 编号 4 (2019) |
Investigation into the Effect of Vibration on the Durability of End Mills at Machining Titanium Alloys |
(Eng)
|
|
Sazonov M., Shvetsov A., Safin A.
|
| 卷 62, 编号 3 (2019) |
Investigation of the Forming Process of Thin-Walled Parts from a Flat Blank with Minimal Thickness Variation |
(Eng)
|
|
Dem’yanenko E.
|
| 卷 62, 编号 3 (2019) |
Calculation of Labor Intensity in the Context of Pilot Production of Small Aircraft |
(Eng)
|
|
Sharafeev I., Markovtsev V.
|
| 卷 62, 编号 3 (2019) |
Electronic Simulation of Single Integrated Structures Made of Polymer Composite Materials with Adhesive Joint |
(Eng)
|
|
Naumov A., Lyudogovskii P., Filippova M.
|
| 卷 62, 编号 1 (2019) |
Accounting for Geometric Scatter within Manufacturing Tolerances on the Natural Frequency Values of Compressor Rotor Blade during Its Detuning from Dangerous Resonances |
(Eng)
|
|
Vasil’ev B., Semenov A., Sal’nikov A., Bortnikov A.
|
| 卷 62, 编号 1 (2019) |
Icing Intensity of Passive Organosilicon Anti-Icing Coatings |
(Eng)
|
|
Danilaev M., Bogoslov E., Dorogov N., Klabukov M., Bobina E.
|
| 卷 62, 编号 1 (2019) |
Ways to Manage Small-Scale Machine-Building Production |
(Eng)
|
|
Ivanov V.
|
| 卷 62, 编号 1 (2019) |
Graph Modeling of Data for Assembly Process of GTE Units in Conditions of Production Digitalization |
(Eng)
|
|
Lyutov A., Ryabov Y., Akh’yanillin N., Davletshin L.
|
| 卷 62, 编号 1 (2019) |
Determination of the Folded Core Geometric Characteristics Based on a Flat-Faceted Elementary Module with Translational Symmetry Considering the Material Thickness |
(Eng)
|
|
Semeshko M., Alekseev K., Zakiro I., Markovtsev V.
|
| 卷 62, 编号 1 (2019) |
Analysis of Process Setting Accuracy for Multifunctional CNC-Machines |
(Eng)
|
|
Yusupov Z.
|
| 卷 62, 编号 1 (2019) |
Quality Assurance of Assembling of GTE Threaded Joints by Ultrasonic Treatment upon the Required Strength Criterion |
(Eng)
|
|
Shuvaev V., Nepomiluev V., Rykunov A., Semenov A.
|
| 卷 61, 编号 3 (2018) |
Dynamic One-Sided Thermal Scanning of Aircraft Composite Fairings |
(Eng)
|
|
Ryazhskikh A., Zaets N., Chizhov I., Seminikhin O.
|
| 卷 61, 编号 3 (2018) |
Development of a Technique to Reduce Porosity in Composite Structures at the Limited Autoclave Pressure |
(Eng)
|
|
Samipour S., Batrakov V., Konstantinov D.
|
| 卷 61, 编号 3 (2018) |
Improving the Technology of Rotary Electrochemical Machining of Compressor Blades |
(Eng)
|
|
Poletaev V., Orlov A.
|
| 卷 61, 编号 1 (2018) |
Influence of Autoclave Molding Modes and Stack Structure on Porosity of Composite Materials |
(Eng)
|
|
Batrakov V., Petrushenko R., Konstantinov D., Khamidullin O.
|
| 卷 61, 编号 1 (2018) |
Determination of Slag Retention Ability of Gating Systems |
(Eng)
|
|
Izotov V., Serebryakov S., Shatul’skii A.
|
| 卷 61, 编号 1 (2018) |
Gas and Powder Flow Optimization in a Four-Jet Laser Cladding Head |
(Eng)
|
|
Shpilev A., Iskhakov F., Nagulin K., Gil’mutdinov A.
|
| 卷 60, 编号 4 (2017) |
Modeling of Hybrid Shell Shaping Process in Carbon Fiber Tooling |
(Eng)
|
|
Shabalin L., Sidorov I., Sungatullin R.
|
| 卷 60, 编号 4 (2017) |
A Technique of Holes Axes Definition in Hidden and Hard-to-Get-to Hardware Zones by Means of Laser Coordinate Measuring Systems |
(Eng)
|
|
Lyudogovskii P., Komkova M.
|
| 卷 60, 编号 2 (2017) |
Cyclic folding of composite zigzag structures and calculating of equipment parameters |
(Eng)
|
|
Khaliulin V.
|
| 卷 60, 编号 2 (2017) |
Design of gating systems in production of gas turbine engine blades |
(Eng)
|
|
Smykov A., Moiseev V., Chumadin A.
|
| 卷 60, 编号 1 (2017) |
An algorithm for calibrating the three-axis magnetometer |
(Eng)
|
|
Emaletdinova L., Gainutdinova A., Gainutdinova T.
|
| 卷 60, 编号 1 (2017) |
Optimization of forming parameters for fiberglass shells of rocket nose cones by a criticality criterion |
(Eng)
|
|
Urazbakhtin F., Kharinova Y., Urazbakhtina A.
|
| 1 - 25 的 36 信息 |
1 2 > >>
|
