Determination of Slag Retention Ability of Gating Systems
- Authors: Izotov V.A.1, Serebryakov S.P.1, Shatul’skii A.A.1
-
Affiliations:
- Soloviev Rybinsk State Aviation Technical University
- Issue: Vol 61, No 1 (2018)
- Pages: 95-98
- Section: Aircraft Production Technology
- URL: https://journals.rcsi.science/1068-7998/article/view/230424
- DOI: https://doi.org/10.3103/S1068799818010154
- ID: 230424
Cite item
Abstract
The paper highlights results of analyzing the gating systems in terms of assurance of slag retention at the stage when the mold cavity is filled up with the melt. Quantitative values of parameters as to assessment of slag retention were obtained that can be applied in selecting the gating system type for a casting.
Keywords
About the authors
V. A. Izotov
Soloviev Rybinsk State Aviation Technical University
Email: shatulsky@rsatu.ru
Russian Federation, ul. Pushkina 53, Rybinsk, 152934
S. P. Serebryakov
Soloviev Rybinsk State Aviation Technical University
Email: shatulsky@rsatu.ru
Russian Federation, ul. Pushkina 53, Rybinsk, 152934
A. A. Shatul’skii
Soloviev Rybinsk State Aviation Technical University
Author for correspondence.
Email: shatulsky@rsatu.ru
Russian Federation, ul. Pushkina 53, Rybinsk, 152934