检索

期
标题
作者
卷 85, 编号 4 (2018)
Method of the strength analysis of a track-type tractor undercarriage with the use of multibody simulation and fininte element analysis
Gorelov V., Komissarov A., Vdovin D., Gaev S., Vyaznikov M., Taratorkin I.
PDF
(Rus)
卷 91, 编号 2 (2024)
Analysis of the balance of the crank-slider drive mechanism of the cutting apparatus by the method of principal point vectors
Kotov A.
PDF
(Rus)
卷 79, 编号 3 (2012)
Grinding devices of modern forage harvesters
Belov M., Gubernskiy A., Gadzhiyev P., Slavkin V., Pronin V.
卷 78, 编号 6 (2011)
Geometrical parameters of combined working members of tillage machines
Nikonova G., Nikonov M., Stakhanov D.
卷 87, 编号 1 (2020)
Vector analysis of the kinematic characteristics of two-joint cardan shaft
Kotov A.
PDF
(Rus)
卷 84, 编号 10 (2017)
Energy analysis of dual-flow hydromechanical gears
Sharipov V., Shchetinin Y., Gaev S., Troshkin O.
PDF
(Rus)
卷 79, 编号 10 (2012)
Experimental assessment of wear and plastic deformations of the hydraulic cylinder elastomeric seals
Borisov V., Kuznetsov V., Vodyakov V., Kotin A.
卷 79, 编号 4 (2012)
Analysis of methods of accreditation and evaluation of certification centers performance in the WTO
Sapozhnikov I.
卷 78, 编号 5 (2011)
The results of motor studies of mustard oil biodiesel
Ukhanov A., Ukhanov D., Golubev V., Safarov R., Shemenev D.
卷 87, 编号 3 (2020)
Selection of the optimal system of differentiated fertilizer application and the laboratory research results in Northern Kazakhstan
Tokarev I., Kuvayev A., Derepaskin A., Bobkov S.
PDF
(Rus)
卷 83, 编号 11 (2016)
Application of statistical methods for quality control of measurement processes in the enterprises of technical service of agroindustrial complex
Pchelkin A.
PDF
(Rus)
卷 80, 编号 4 (2013)
Features of quality engineering of construction manufacturability of tractive and transport vehicles
Didmanidze O., Leonov O., Legeza G., Sapozhnikov I.
卷 79, 编号 6 (2012)
Review of baler market
Yeliseyev A.
卷 78, 编号 5 (2011)
Agrotechnical and technological parameters of agricultural trucks
Galkin S., Dzotsenidze T., Levshin A., Yevtyushenkov N.
卷 84, 编号 2 (2017)
POWER ANALYSIS OF DUAL-FLOW HYDROMECHANICAL GEARS
Sharipov V., Shchetinin Y., Gaev S., Troshkin O.
PDF
(Rus)
卷 80, 编号 11 (2013)
Improvement of subsurface tillage with combined chisel plough and subsoil cultivator
Khizhnyak V., Nesmiyan A., Schirov V., Khlystov Y., Bobryashov A.
卷 90, 编号 3 (2023)
Field testing of a disk-chisel harrow
Tarasenko B., Khav’yarimana E., Drobot V., Rudnev S.
PDF
(Rus)
卷 78, 编号 12 (2011)
Vector analysis of spatial lever mechanisms
Kotov A., Chuprynin Y.
卷 78, 编号 2 (2011)
Biofuel made of Camelina sativa
Ukhanov A., Ukhanov D., Rachkin V., Chugunov V., Demidov Y., Shemenev D.
卷 85, 编号 2 (2018)
Optimization of the reinforcing layer of the compressor wheel from the composite material of the diesel turbocharger
Netrusov A., Fomin V.
PDF
(Rus)
卷 84, 编号 2 (2017)
INVESTIGATION OF STRENGTH PROPERTIES OF IMPELLERS MADE OF COMPOSITE MATERIAL FOR DIESEL ENGINES
Netrusov A., Fomin V.
PDF
(Rus)
卷 81, 编号 3 (2014)
Comparative parameters of tools for surface tillage
Nesmiyan A., Kobets M., Dolzhikov V., Gladkiy S.
卷 90, 编号 1 (2023)
The optimization of parameters of a safety element of the finger mechanism of the header auger of a combine harvester
Kotov A.
PDF
(Rus)
卷 78, 编号 9 (2011)
A method of comparative analysis of the locking principles of interaxle power distribution units
Kotovskov A., Potapov P., Simonov D.
卷 77, 编号 6 (2010)
Effect of biomass-and-mineral fuel ultrasonic treatment on the tractor diesel indices
Ukhanov A., Ukhanov D., Ivanov V., Blagodarina L., Demidov Y., Safarov R.
卷 85, 编号 1 (2018)
Force analysis of the mechanisms of tillage machines working elements following a specified path
Parkhomenko G., Parkhomenko S.
PDF
(Rus)
卷 83, 编号 12 (2016)
Kinematic analysis of double-flow hydromechanical transmissions
Sharipov V., Shchetinin Y., Dmitriev M.
PDF
(Rus)
卷 81, 编号 9 (2014)
Results of the experimental research of kinematic excitations of machines from agricultural track profiles
Podrubalov V., Podrubalov M.
卷 88, 编号 5 (2021)
Study of load level of bearing-outlet units of turbocharger with impellers from composite materials
Fomin V., Kaminsky V., Kaminsky R., Netrusov A.
PDF
(Rus)
卷 78, 编号 7 (2011)
Improving the methods of processing test data of land-based vehicles
Osinenko P.
卷 76, 编号 8 (2009)
Synthesis of eccentric instrumental chucks of boring-and-milling machines for repair shops
Kuznetsov Y., Al-Dabas K., Manilo I.
卷 85, 编号 2 (2018)
Comparative analysis of the consumer characteristics of needle and tooth harrows
Eremenko Y., Nesmiyan A., Kulakov A., Asaturyan S.
PDF
(Rus)
卷 83, 编号 4 (2016)
Kinematic analysis of connection of hydraulic cylinders of a forwarder crane under execution of defined motion of grapple
Piskunov M., Adamov D.
PDF
(Rus)
卷 82, 编号 6 (2015)
Oils as diagnosing means for machinery and equipment
Dunayev A.
卷 88, 编号 6 (2021)
Method for predicting the technical appearance of grain and forage harvesters of new generations with a substantiation of the structure of their vibration protection system
Sirotin P.
PDF
(Rus)
卷 78, 编号 1 (2011)
Geometric parameters of ploughshares' radiating wear
Mikhalchenkov A., Kovalev A., Kozarez I.
卷 86, 编号 5 (2019)
Methodology for multicriteria assessment and selection of an effective method of grain disinfection
Pahomov A.
PDF
(Rus)
卷 85, 编号 3 (2018)
Analysis of hydrodynamic characteristics of sprays of nozzles of ICE
Altukhov S., Shukhanov S.
PDF
(Rus)
卷 83, 编号 3 (2016)
Analysis of market of row-crop cultivators
Fomenko D., Nesmiyan A.
PDF
(Rus)
卷 88, 编号 2 (2021)
Determination of the optimal composition of mixed fuel based on environmental indicators of diesel engine
Plotnikov S., Gnevashev P.
PDF
(Rus)
卷 78, 编号 3 (2011)
Analysis of energy consumption by moving plough body during the tillage
Nikolayev V.
卷 87, 编号 1 (2020)
The results of experimental studies of the root crop chopper
Shukhanov S., Dorzhiev A., Kosareva A.
PDF
(Rus)
卷 84, 编号 6 (2017)
Technical characteristics and agrotechnical indices of work of tillage machines
Nesmiyan A.
PDF
(Rus)
卷 82, 编号 10 (2015)
Balancing of swash plate mechanism for cutterbar drive of grass cutting header
Kotov A., Chuprynin Y.
1 - 44 的 44 信息

检索提示:

  • 检索的名词区分大小写
  • 常用字词将被忽略
  • 默认情况下只有在查询结果满足所有检索词才返回（例如，隐含AND）
  • 使用OR结合多个检索词，便于查找含有这些检索词的文章，例如education OR research
  • 使用括号来创建更复杂的查询; 例如：archive ((journal OR conference) NOT theses)
  • 使用引号检索一个完整的词组; 例如： "open access publishing"
  • 使用-或者NOT排除一个检索词; 例如：online -politics or online NOT politics
  • 在检索词里使用 *作为通配符匹配任何字符序列; 例如., soci* morality 将符合含有 "sociological" or "societal"的词语

##common.cookie##