检索

标题
作者
Structure and Mechanical Properties of Cold-Deformed Galvanized Rolled Sheets for Light Thin-Walled Constructions
Goritskii V., Kulemin A., Silina N.
Structure and Mechanical Properties of High-Strength Structural Steels
Bannykh O., Sorokin A., Bannykh I., Lukin E.
Structure of electroexplosive TiC–Ni composite coatings on steel after electron-beam treatment
Romanov D., Goncharova E., Budovskikh E., Gromov V., Ivanov Y., Teresov A., Kazimirov S.
Selective Laser Melting of Corrosion-Resistant Steel
Ratkevich G., Zhdanov A., Belyaev L., Yugov V., Afanas’eva L.
Causes and Mechanisms of Fracture of a Main Line Section Made of 17G1S Steel
Goritskii V., Shneiderov G., Durneva A.
Steel Semiproduct Melting Intensification in Electric Arc Furnaces Using Coordinated Control of Electric and Gas Conditions: II. On-Line Control of the State of the Charge and Melt Zones in Electric Arc Furnaces
Sivtsov A., Sheshukov O., Tsymbalist M., Nekrasov I., Makhnutin A., Egiazar’yan D., Orlov P.
Nonuniformity of the Crystallographic Texture and the Mechanical Properties of the Austenitic Steel 316L Plates Formed by Selective Laser Melting of a Powder
Perlovich Y., Isaenkova M., Dobrokhotov P., Rubanov A., Yudin A., Tret’yakov E.
Mass Velocity and Energy Index Oscillations in the Cyclic Electroslag Remelting of ChS-82 Steel
Kissel’man M., Lazukin A., Levkov L., Orlov S., Shurygin D., Dub V., Klochai V., Garchenko A., Samburskiy P.
Normalization of the Cold Shortness of Plate Steel: II. Short-Brittleness Thresholds in Pipe Tests
Shtremel’ M., Arabei A., Glebov A., Pyshmintsev I., Esiev T., Abakumov A.
Effect of Thin Polymer Coatings on the Mechanical Properties of Steel Plates
Babaytsev A., Martirosov M., Rabinskiy L., Solyaev Y.
Anisotropy of the effective elastic modulus of a steel plate with a lattice of circular holes
Gol’dshtein R., Mokryakov V., Chentsov A., Petrovskii V., Andreev A., Glezer A., Libman M.
Effect of volume–surface quenching on the impact toughness of 20GL steel intended for cast freight bogie solebars
Nikulin S., Rozhnov A., Turilina V., Zabolotnikova V., Komissarov A., Nechaikina T.
Application of high-temperature extraction in a carrier gas for a quantitative determination of TiN in rail steel
Tabakov Y., Grigorovich K., Rumyantsev B.
Contributions of the lattice bending and torsion stresses to the plastic component of the internal stresses in a deformed austenitic steel
Kiseleva S., Popova N., Koneva N., Kozlov E.
Structure of the Modified Layer Prepared by Nitriding of Carbon Steel with a Zinc-Filled Coating
Petrova L., Demin P., Timofeeva G., Kosachev A.
Steels with Yield Strength Higher than 700 MPa for Metallic Structures and the Strength of Their Welded Joints
Odesskii P., Gurov S.
Digital Image Correlation Study of the Elastoplastic Deformation of the Steel/CFRP Adhesive Joint
Kopanitsa N., Ustinov A., Trishkina L., Klopotov A., Abzaev Y., Potekaev A.
Effect of a Thermomechanical Action on the Structure and the Mechanical Properties of the Welded Joints of a Hot-Rolled Austenitic Nitrogen-Bearing Steel
Kostina M., Kostina V., Muradyan S.
Steel Semiproduct Melting Intensification in Electric Arc Furnaces Using Coordinated Control of Electric and Gas Conditions: I. Heat Exchange and Structure of the Electric Arc Furnace Laboratory
Sivtsov A., Sheshukov O., Tsymbalist M., Nekrasov I., Makhnutin A., Egiazar’yan D., Orlov P.
Behavior of an Austenitic–Martensitic VNS9-Sh Sheet TRIP Steel during Static and Cyclic Deformation
Teren’tev V., Prosvirnin D., Slizov A., Kobeleva L., Marchenkov A., Ashmarin A., Sirotinkin V.
Causes of Cracking in Quenching of the Parts Made of Steels and Cast Iron and Recommendations for Their Removal: A Review
Kuznetsov A., Rudnev V.
Effect of slag inclusions on the density and the surface tension of liquid 32G2 and 32G1 steels
Borovykh M., Chikova O., Tsepelev V., V’yukhin V.
Measurement of the electrical resistivity of liquid 32G2 and 32G1 steels by the rotating magnetic field method
Borovykh M., Chikova O., Tsepelev V., V’yukhin V.
Structure formation in grade 20 steel during equal-channel angular pressing and subsequent heating
Dobatkin S., Odesskii P., Raab G., Tyutin M., Rybalchenko O.
Influence of the Production Factors and Export–Import Metal Trading Operations on the State of the Art of the World Steel Market
Bogdanov S., Morozov I., Bogdanova T.
1 - 25 的 81 信息 1 2 3 4 > >> 

检索提示:

  • 检索的名词区分大小写
  • 常用字词将被忽略
  • 默认情况下只有在查询结果满足所有检索词才返回(例如,隐含AND)
  • 使用OR结合多个检索词,便于查找含有这些检索词的文章,例如education OR research
  • 使用括号来创建更复杂的查询; 例如:archive ((journal OR conference) NOT theses)
  • 使用引号检索一个完整的词组; 例如: "open access publishing"
  • 使用-或者NOT排除一个检索词; 例如:online -politics or online NOT politics
  • 在检索词里使用 *作为通配符匹配任何字符序列; 例如., soci* morality 将符合含有 "sociological" or "societal"的词语
##common.cookie##