Anisotropy of the effective elastic modulus of a steel plate with a lattice of circular holes


Cite item

Full Text

Open Access Open Access
Restricted Access Access granted
Restricted Access Subscription Access

Abstract

Plates with a doubly periodic commensurate lattice of circular holes are studied. The plates are cut from a corrosion-resistant steel sheet along and across the rolling direction. Uniaxial tensile tests are performed, and the effective elastic modulus is determined for longitudinal and transverse plates with various lattice orientations with respect to the longitudinal axis of a plate. The experimental and calculated results agree well.

About the authors

R. V. Gol’dshtein

Institute for Problems in Mechanics

Email: mokr@ipmnet.ru
Russian Federation, pr. Vernadskogo 101-1, Moscow, 119526

V. V. Mokryakov

Institute for Problems in Mechanics

Author for correspondence.
Email: mokr@ipmnet.ru
Russian Federation, pr. Vernadskogo 101-1, Moscow, 119526

A. V. Chentsov

Institute for Problems in Mechanics

Email: mokr@ipmnet.ru
Russian Federation, pr. Vernadskogo 101-1, Moscow, 119526

V. N. Petrovskii

National Research Nuclear University MEPhI

Email: mokr@ipmnet.ru
Russian Federation, Kashirskoe sh. 31, Moscow, 115409

A. O. Andreev

National Research Nuclear University MEPhI

Email: mokr@ipmnet.ru
Russian Federation, Kashirskoe sh. 31, Moscow, 115409

A. M. Glezer

Bardin Central Research Institute of Ferrous Metallurgy

Email: mokr@ipmnet.ru
Russian Federation, ul. Vtoraya Baumanskaya 9/23, Moscow, 105005

M. A. Libman

Bardin Central Research Institute of Ferrous Metallurgy

Email: mokr@ipmnet.ru
Russian Federation, ul. Vtoraya Baumanskaya 9/23, Moscow, 105005


Copyright (c) 2017 Pleiades Publishing, Ltd.

This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies