Enviar artigo por via de e-mail Structure of the Modified Layer Prepared by Nitriding of Carbon Steel with a Zinc-Filled Coating
- Autores: Petrova L.1, Demin P.1, Timofeeva G.1, Kosachev A.1
-
Afiliações:
- Moscow Automobile and Road Construction State Technical University MADI
- Edição: Volume 2019, Nº 13 (2019)
- Páginas: 1414-1420
- Seção: Coating Deposition
- URL: https://journals.rcsi.science/0036-0295/article/view/173844
- DOI: https://doi.org/10.1134/S0036029519130263
- ID: 173844
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
The nitriding of a grade 45 carbon steel with a zinc-filled coating (ZFC), which was preliminary formed by cold galvanizing, is considered. The microstructure and the chemical and phase compositions of the modified layer are studied experimentally. It is found that the nitriding leads to the formation of a transition zone in the steel substrate, which is located under ZFC and results from the diffusion of zinc and nitrogen in iron.
Palavras-chave
Sobre autores
L. Petrova
Moscow Automobile and Road Construction State Technical University MADI
Email: petr-demin@yandex.ru
Rússia, Moscow, 125319
P. Demin
Moscow Automobile and Road Construction State Technical University MADI
Autor responsável pela correspondência
Email: petr-demin@yandex.ru
Rússia, Moscow, 125319
G. Timofeeva
Moscow Automobile and Road Construction State Technical University MADI
Email: petr-demin@yandex.ru
Rússia, Moscow, 125319
A. Kosachev
Moscow Automobile and Road Construction State Technical University MADI
Email: petr-demin@yandex.ru
Rússia, Moscow, 125319
