Email this article Contributions of the lattice bending and torsion stresses to the plastic component of the internal stresses in a deformed austenitic steel
- Authors: Kiseleva S.F.1, Popova N.A.1, Koneva N.A.1, Kozlov E.V.1
-
Affiliations:
- Tomsk State University of Architecture and Building
- Issue: Vol 2016, No 10 (2016)
- Pages: 895-898
- Section: Physical Foundations of Strength and Plasticity
- URL: https://journals.rcsi.science/0036-0295/article/view/170900
- DOI: https://doi.org/10.1134/S0036029516100086
- ID: 170900
Cite item
Open Access
Access granted
Subscription Access
Abstract
The parameters of bend extinction contours are used to determine the tensor components of internal stresses, namely, the lattice bending and torsion stresses. The laws of their distribution and the contributions of the internal stresses to the plastic component during the deformation of an austenitic steel are found.
About the authors
S. F. Kiseleva
Tomsk State University of Architecture and Building
Author for correspondence.
Email: kisielieva1946@mail.ru
Russian Federation, Tomsk, 634003
N. A. Popova
Tomsk State University of Architecture and Building
Email: kisielieva1946@mail.ru
Russian Federation, Tomsk, 634003
N. A. Koneva
Tomsk State University of Architecture and Building
Email: kisielieva1946@mail.ru
Russian Federation, Tomsk, 634003
E. V. Kozlov
Tomsk State University of Architecture and Building
Email: kisielieva1946@mail.ru
Russian Federation, Tomsk, 634003
