检索

期
标题
作者
卷 2019, 编号 12 (2019)
Effect of Temperature on the Porosity of the Additive Products Made of the Dispersed Wastes of Cobalt–Chromium Alloys
Latypov R., Ageev E., Altukhov A., Ageeva E.
PDF
(Eng)
卷 2019, 编号 3 (2019)
Properties of a 49Ni–36Ti–15Hf High-Temperature Shape Memory Alloy in the As-Cast State
Popov N., Presnyakov D., Grishin E., Sysoeva T., Morozova T., Kostyleva A.
PDF
(Eng)
卷 2018, 编号 3 (2018)
Microstructure and Properties of Graphitized Free-Cutting Steel
Zhang Y., Han J.
PDF
(Eng)
卷 2018, 编号 7 (2018)
Hardening of Silumins by Aerothermoacoustic Treatment
Remshev E., Danilin G., Titov A., Vorob’eva G., Kalugina M.
PDF
(Eng)
卷 2016, 编号 13 (2016)
Control of the surface quality parameters of machine components during static pulsed treatment
Komkov V., Rabinskii L., Kokoreva O., Kuprikov N.
PDF
(Eng)
卷 2019, 编号 12 (2019)
Effect of Electric Fields on the Structure of an Aluminum Alloy during Magnetohydrodynamic Treatment
Ospennikova O., Laptev A., Pervukhin M., Afanas’ev-Khodykin A., Timofeev V., Movenko D.
PDF
(Eng)
卷 2019, 编号 2 (2019)
Structure of the Al90Y10 Alloy Formed upon Pressure Solidification
Menshikova S., Shirinkina I., Brodova I., Brazhkin V.
PDF
(Eng)
卷 2018, 编号 2 (2018)
Effect of a Nonstationary Electric Current on the Oxide Melt–Gas Phase System
Krasikov S., Utelbaev B., Suleimenov E.
PDF
(Eng)
卷 2017, 编号 11 (2017)
Effect of the Initial State of a Steel 38KhN3MFA Billet on the Microstructure and the Mechanical Properties of Seamless Pipes
Vorob’ev R., Dubinskii V., Sorokina S.
PDF
(Eng)
卷 2016, 编号 11 (2016)
Properties of shaped castings made of modern cast VML18 and VML20 magnesium alloys manufactured by new methods
Leonov A., Duyunova V., Uridiya Z., Trofimov N.
PDF
(Eng)
卷 2019, 编号 11 (2019)
Viscosity of Molten Brass and Copper Used for Quality Control in the Charge–Melt–Ingot Chain
Tkachuk G., Chikova O., V’yukhin V.
PDF
(Eng)
卷 2019, 编号 1 (2019)
Effect of a Thermomechanical Action on the Structure and the Mechanical Properties of the Welded Joints of a Hot-Rolled Austenitic Nitrogen-Bearing Steel
Kostina M., Kostina V., Muradyan S.
PDF
(Eng)
卷 2018, 编号 2 (2018)
Synthesis of an Aluminum–Erbium Master Alloy from Chloride–Fluoride Melts
Kosov Y., Bazhin V.
PDF
(Eng)
卷 2017, 编号 10 (2017)
Adhesion energy in the metal/oxide system for the case of high-temperature oxidation of nickel-based superalloys
Moskvichev V., Sukhodoeva N., Fedorova E., Popov A.
PDF
(Eng)
卷 2016, 编号 11 (2016)
Properties of a 45Ti–45Ni–10Nb shape memory alloy in the as-cast and pressed states
Popov N., Sysoeva T., Aushev A., Lar’kin V., Kostyleva A.
PDF
(Eng)
卷 2019, 编号 10 (2019)
On the Use of Atomic Force Microscopy in Metallography
Shlyakhova G., Barannikova S., Zuev L.
PDF
(Eng)
卷 2019, 编号 1 (2019)
Comparative Analysis of the Ternary Al–Si–X and Al–Cu–X (X = Sn, Pb, Bi, Cd, In) Systems in the Aluminum Alloy Range
Yakovleva O., Belov N.
PDF
(Eng)
卷 2018, 编号 1 (2018)
Effect of Some Impurities on the Structure, the Phase Composition, and the Properties of Magnesium Alloys Containing Rare-Earth Elements
Volkova E., Mostyaev I.
PDF
(Eng)
卷 2017, 编号 10 (2017)
Effect of chromium on the structure evolution in single-phase Ni–Cr alloys during high-pressure torsion
Krasnoperova Y., Degtyarev M., Chashchukhina T., Voronova L.
PDF
(Eng)
卷 2016, 编号 10 (2016)
Changes in the fracture strength parameters of ferritic–bainitic and bainitic pipe steels during operation
Zikeev V., Filippov G., Shabalov I., Livanova O., Solov’ev D.
PDF
(Eng)
卷 2019, 编号 9 (2019)
Effect of Annealing on the Structure and the Hardness of Die Steel with a Controllable Austenitic Transformation during Operation
Kruglyakov A., Nikulin S., Rogachev S., Lebedeva N., Panova G., Nguen H., Serikov E.
PDF
(Eng)
卷 2018, 编号 13 (2018)
Technological Possibilities of Increasing the Quality and Decreasing the Cost of the Products Operating under High Loads at the Stage of Metallurgical Treatment
Sudnik L., Rudnitskii F., Rudnitskii K., Nikolaichik Y., Galinovskii A., Moiseev V.
PDF
(Eng)
卷 2018, 编号 1 (2018)
Solid-State Oxidation Kinetics of a Lanthanum-Modified Al + 6% Li Alloy
Nazarov S., Ganiev I., Calliari I., Berdiev A., Ganieva N.
PDF
(Eng)
卷 2017, 编号 7 (2017)
Viscosity of the liquid Al–6Mg–1Mn–0.2Sc–0.1Zr alloy
Reznik P., Chikova O., Tsepelev V.
PDF
(Eng)
卷 2016, 编号 10 (2016)
Effect of the deformation temperature on the structural refinement of BCC metals with a high stacking fault energy during high pressure torsion
Voronova L., Chashchukhina T., Gapontseva T., Krasnoperova Y., Degtyarev M., Pilyugin V.
PDF
(Eng)
1 - 25 的 39 信息 1 2 > >> 

检索提示:

  • 检索的名词区分大小写
  • 常用字词将被忽略
  • 默认情况下只有在查询结果满足所有检索词才返回（例如，隐含AND）
  • 使用OR结合多个检索词，便于查找含有这些检索词的文章，例如education OR research
  • 使用括号来创建更复杂的查询; 例如：archive ((journal OR conference) NOT theses)
  • 使用引号检索一个完整的词组; 例如： "open access publishing"
  • 使用-或者NOT排除一个检索词; 例如：online -politics or online NOT politics
  • 在检索词里使用 *作为通配符匹配任何字符序列; 例如., soci* morality 将符合含有 "sociological" or "societal"的词语
##common.cookie##