Email this article Control of the surface quality parameters of machine components during static pulsed treatment
- Authors: Komkov V.A.1, Rabinskii L.N.1, Kokoreva O.G.1, Kuprikov N.M.1
-
Affiliations:
- Moscow Aviation Institute
- Issue: Vol 2016, No 13 (2016)
- Pages: 1317-1320
- Section: Quality Management and Certification
- URL: https://journals.rcsi.science/0036-0295/article/view/171176
- DOI: https://doi.org/10.1134/S0036029516130085
- ID: 171176
Cite item
Open Access
Access granted
Subscription Access
Abstract
A technique is developed to determine the homogeneity of the structure in a surface layer subjected to strain hardening. Static pulsed treatment is found to be one of the most effective surface plastic deformation methods that can be used to control the uniformity of hardening a surface layer. This treatment makes it possible to create a hardened surface layer to a depth of 10 mm with a homogeneous or heterogeneous structure.
About the authors
V. A. Komkov
Moscow Aviation Institute
Author for correspondence.
Email: vakomkov@gmail.com
Russian Federation, Volokolamskoe sh. 4, Moscow, 125993
L. N. Rabinskii
Moscow Aviation Institute
Email: vakomkov@gmail.com
Russian Federation, Volokolamskoe sh. 4, Moscow, 125993
O. G. Kokoreva
Moscow Aviation Institute
Email: vakomkov@gmail.com
Russian Federation, Volokolamskoe sh. 4, Moscow, 125993
N. M. Kuprikov
Moscow Aviation Institute
Email: vakomkov@gmail.com
Russian Federation, Volokolamskoe sh. 4, Moscow, 125993
