Pesquisa

Edição
Título
Autores
Volume 2019, Nº 13 (2019)
Designing and Calculation of Extruded Sections of an Inhomogeneous Composition
Babaytsev A., Zotov A.
PDF
(Eng)
Volume 2017, Nº 12 (2017)
Experience of Application of EBW in Producing Welded VT41 Alloy Drums in the Design of an HPC in an Advanced Engine
Bykov Y., Fomichev E., Kashapov O., Kyaramyan K.
PDF
(Eng)
Volume 2016, Nº 10 (2016)
Estimation of the residual stresses in rails using electromagnetic–acoustic introduction–reception of waves
Murav’ev V., Volkova L., Gromov V., Glezer A.
PDF
(Eng)
Volume 2019, Nº 12 (2019)
Simulation of the Heat Treatment of the Welded Joints in a High-Pressure Compressor
Kyaramyan K., Lomberg B., Bakradze M., Isaev D., Bykov Y., Mazalov I.
PDF
(Eng)
Volume 2017, Nº 9 (2017)
Refinement of the technique of plotting the flow curves of a metal to predict its hardening in alternating cold plastic deformation
Shelest A., Yusupov V., Perkas M., Sheftel’ E., Akopyan K., Prosvirnin V.
PDF
(Eng)
Volume 2016, Nº 10 (2016)
Contributions of the lattice bending and torsion stresses to the plastic component of the internal stresses in a deformed austenitic steel
Kiseleva S., Popova N., Koneva N., Kozlov E.
PDF
(Eng)
Volume 2019, Nº 10 (2019)
Estimation of the Local State of Stress and Strains in Stress Concentration Zones in a Wide Strain Range
Makhutov N., Reznikov D.
PDF
(Eng)
Volume 2017, Nº 5 (2017)
Surface stresses in plastically deformed steels by X-ray diffraction
Rozhnov A., Nikulin S., Shchetinin I., Shitkin S., Rogachev S.
PDF
(Eng)
Volume 2019, Nº 6 (2019)
Conditions of Air Shot Hardening of VT41 Titanium Alloy Blisk Blades for an Advanced Engine
Yakovlev M., Kyaramyan K., Shirvan’yants G.
PDF
(Eng)
Volume 2017, Nº 4 (2017)
New deformability characteristics of zirconia-based plasma-sprayed thermal barrier coatings at low loads
Il’inkova T., Ibragimov A.
PDF
(Eng)
Volume 2018, Nº 10 (2018)
Effect of Alloying of Titanium Nickelide-Based Alloys with Group V Elements (Vanadium, Niobium) on Their Mechanical Properties
Marchenko E., Baigonakova G., Gunther V.
PDF
(Eng)
Volume 2017, Nº 4 (2017)
Method for calculating the limiting technological residual stresses in a tubular billet
Kolmogorov G., Kuznetsova E.
PDF
(Eng)
Volume 2018, Nº 4 (2018)
Phase Composition, Texture, and Residual Stresses in Al–Cu–Li Friction Stir Welds
Betsofen S., Lukin V., Dolgova M., Panteleev M., Kabanova Y.
PDF
(Eng)
Volume 2016, Nº 13 (2016)
Control of the surface quality parameters of machine components during static pulsed treatment
Komkov V., Rabinskii L., Kokoreva O., Kuprikov N.
PDF
(Eng)
Volume 2018, Nº 4 (2018)
Microstructural Model for the Deformation of Shape Memory Alloys
Movchan A., Mishustin I., Kazarina S.
PDF
(Eng)
Volume 2016, Nº 13 (2016)
Effect of severe technological deformation on the copper density
Gliner R., Dubinskii V., Nuzhdina T., Katyukhin E.
PDF
(Eng)
Volume 2018, Nº 1 (2018)
Application of the Finite Element Method to Reveal the Causes of Loss of Planeness of Hot-Rolled Steel Sheets during Laser Cutting
Garber E., Bolobanova N., Trusov K.
PDF
(Eng)
Volume 2016, Nº 10 (2016)
Application of elastically deformed test samples for measuring stresses using a hand-held X-ray diffractometer
Shitkin S., Rozhnov A., Matveev D., Kotelkin A.
PDF
(Eng)
1 - 18 de 18 resultados
Dicas:
  • Palavras-chave são sensíveis a maiúsculas
  • Preposições e conjunções ingleses são ignoradas
  • Busca é feita por todos os palavras-chave (agente AND experimentador) por omissão
  • Use OR para pesquisar um termo exato, ex.: educação OR formação
  • Use parênteses para criar frases complexas, ex.: arquivo de ((revistas OR conferências) NOT teses)
  • Para pesquisar uma frase precisa use aspas duplas, ex.: "investigações científicas"
  • Exclua uma palavra utilizando o sinal - (hífen) ou operador NOT; ex.: concurso-de beleza ou concurso NOT de beleza
  • Use * como caractere-coringa, ex.: científic* recuperará as palavras "científico", "científicos", etc.

Este site utiliza cookies

Ao continuar usando nosso site, você concorda com o procedimento de cookies que mantêm o site funcionando normalmente.

Informação sobre cookies