Effect of Alloying of Titanium Nickelide-Based Alloys with Group V Elements (Vanadium, Niobium) on Their Mechanical Properties
- Authors: Marchenko E.S.1, Baigonakova G.A.1, Gunther V.E.1
-
Affiliations:
- Tomsk State University
- Issue: Vol 2018, No 10 (2018)
- Pages: 990-994
- Section: Applied Problems of Strength and Plasticity
- URL: https://journals.rcsi.science/0036-0295/article/view/172672
- DOI: https://doi.org/10.1134/S0036029518100129
- ID: 172672
Cite item
Abstract
The mechanical properties of the Ti50Ni49.7Mo0.3 alloy with 1–4 at % vanadium and niobium have been studied. The best mechanical properties are found to be in the alloys containing 1 at % vanadium and niobium. The further increase in the vanadium concentration leads to a decrease in the strength and ductile properties of the alloy; an increase in the niobium concentration causes an increase in the ductility of the alloy and a decrease in the strength properties.
About the authors
E. S. Marchenko
Tomsk State University
Email: gat27@mail.ru
Russian Federation, Tomsk, 634050
G. A. Baigonakova
Tomsk State University
Author for correspondence.
Email: gat27@mail.ru
Russian Federation, Tomsk, 634050
V. E. Gunther
Tomsk State University
Email: gat27@mail.ru
Russian Federation, Tomsk, 634050