Email this article Estimation of the residual stresses in rails using electromagnetic–acoustic introduction–reception of waves
- Authors: Murav’ev V.V.1, Volkova L.V.1, Gromov V.E.2, Glezer A.M.3
-
Affiliations:
- Izhevsk State Technical University
- Siberian State Industrial University
- Bardin Central Research Institute of Ferrous Metallurgy
- Issue: Vol 2016, No 10 (2016)
- Pages: 992-995
- Section: Diagnostics and Mechanical Test Techniques
- URL: https://journals.rcsi.science/0036-0295/article/view/170963
- DOI: https://doi.org/10.1134/S003602951610013X
- ID: 170963
Cite item
Open Access
Access granted
Subscription Access
Abstract
An approach to estimating the residual stresses in rails using acoustoelasticity and electromagnetic–acoustic conversion is described. The results of ultrasonic control of the residual stresses in rail segments are presented.
About the authors
V. V. Murav’ev
Izhevsk State Technical University
Email: gromov@physics.sibsiu.ru
Russian Federation, Izhesk, 426069
L. V. Volkova
Izhevsk State Technical University
Email: gromov@physics.sibsiu.ru
Russian Federation, Izhesk, 426069
V. E. Gromov
Siberian State Industrial University
Author for correspondence.
Email: gromov@physics.sibsiu.ru
Russian Federation, ul. Kirova 42, Novokuznetsk, 654007
A. M. Glezer
Bardin Central Research Institute of Ferrous Metallurgy
Email: gromov@physics.sibsiu.ru
Russian Federation, ul. Vtoraya Baumanskaya 9/23, Moscow, 105005
