Pesquisa

Edição
Título
Autores
Volume 2017, Nº 10 (2017)
Influence of the tempering temperature on the mechanical properties and the phase composition of thin sheet TRIP steel
Terent’ev V., Eliseev E., Matyunin V., Slizov A., Marchenkov A., Sirotinkin V., Baikin A., Seval’nev G.
PDF
(Eng)
Volume 2017, Nº 4 (2017)
Method for calculating the limiting technological residual stresses in a tubular billet
Kolmogorov G., Kuznetsova E.
PDF
(Eng)
Volume 2016, Nº 10 (2016)
Oxidation resistance and strength of a molybdenum fiber–oxide matrix composite material
Mileiko S., Novokhatskaya N., Prokopenko N., Kolchin A., Mitskevich A., Chumichev V., Novikov I.
PDF
(Eng)
Volume 2019, Nº 10 (2019)
Structure and Mechanical Properties of the Molybdenum–Steel Bimetal Fabricated by Hot Isostatic Pressing
Makhina D., Denisov V., Perminova Y., Butrim V., Nikulin S.
PDF
(Eng)
Volume 2019, Nº 4 (2019)
Microstructure and Mechanical Properties of the Fuel Cladding in VVER-1000 after the Thermal Tests That Model Dry Storage Conditions
Kobylyansky G., Obukhov A., Mazaev A., Zvir E., Ilyin P., Markelov D.
PDF
(Eng)
Volume 2018, Nº 10 (2018)
Development of Approaches to Estimating the Breaking Strength of Steel for Building Metallic Structures and Modern Standards
Odesskii P.
PDF
(Eng)
Volume 2018, Nº 3 (2018)
Microstructure and Properties of Graphitized Free-Cutting Steel
Zhang Y., Han J.
PDF
(Eng)
Volume 2017, Nº 13 (2017)
Graphical Analysis of the State of Stress in Road Harrow Cutters
Seliverstov N., Stasyuk A.
PDF
(Eng)
Volume 2017, Nº 9 (2017)
Effect of the phase composition on the properties of a complex magnesium alloy at temperatures from –70 to +300°C
Volkova E., Duyunova V., Mostyaev I.
PDF
(Eng)
Volume 2017, Nº 1 (2017)
Palladium–lead alloys for the purification of hydrogen-containing gas mixtures and the separation of hydrogen from them
Gorbunov S., Kannykin S., Penkina T., Roshan N., Chustov E., Burkhanov G.
PDF
(Eng)
Volume 2016, Nº 10 (2016)
On the relation between the strength and the plasticity of polymers
Shtremel’ M.
PDF
(Eng)
Volume 2019, Nº 10 (2019)
Structure and Mechanical Properties of the Layered Composites Made of Multicomponent Niobium Alloys and Hardening Silicon–Carbon Compounds Formed by Solid-Phase Sintering
Korzhov V., Kiiko V., Zheltyakova I.
PDF
(Eng)
Volume 2019, Nº 4 (2019)
Adhesion Strength of Ceramic Coatings to Dental Ni–Cr Alloy Fabricated by Casting with 3D Printed Patterns
Dikova T., Dolgov N., Vasilev T., Katreva I.
PDF
(Eng)
Volume 2018, Nº 10 (2018)
Effect of Alloying of Titanium Nickelide-Based Alloys with Group V Elements (Vanadium, Niobium) on Their Mechanical Properties
Marchenko E., Baigonakova G., Gunther V.
PDF
(Eng)
Volume 2018, Nº 1 (2018)
Effect of Recovery and Recrystallization on the Hall–Petch Relation Parameters in Submicrocrystalline Metals: I. Experimental Studies
Chuvil’deev V., Nokhrin A., Myshlyaev M., Kopylov V., Lopatin Y., Melekhin N., Piskunov A., Bobrov A., Pirozhnikova O.
PDF
(Eng)
Volume 2017, Nº 9 (2017)
Development of the manufacture of billets based on high-strength aluminum alloys
Korostelev V., Denisov M., Bol’shakov A., Van Khieu C.
PDF
(Eng)
Volume 2019, Nº 10 (2019)
Structure and High-Temperature Mechanical Properties of High-Carbon Niobium-Based Alloys
Karpov M., Prokhorov D., Vnukov V., Stroganova T., Gnesin B., Gnesin I., Zheltyakova I., Svetlov I.
PDF
(Eng)
Volume 2019, Nº 4 (2019)
Texture and Anisotropy of the Mechanical Properties of Magnesium Alloys
Betsofen S., Osintsev O., Grushin I., Petrov A., Speranskii K.
PDF
(Eng)
Volume 2018, Nº 10 (2018)
Effect of Aging on the Nanostructuring and Strength of a D16 Aluminum Alloy
Markushev M., Avtokratova E., Ilyasov R., Krymskiy S., Sitdikov O.
PDF
(Eng)
Volume 2018, Nº 1 (2018)
Effect of Some Impurities on the Structure, the Phase Composition, and the Properties of Magnesium Alloys Containing Rare-Earth Elements
Volkova E., Mostyaev I.
PDF
(Eng)
Volume 2017, Nº 11 (2017)
Estimation of the Ultimate Tensile Strength of Steel from Its HB and HV Hardness Numbers and Coercive Force
Sandomirskii S.
PDF
(Eng)
Volume 2017, Nº 7 (2017)
Dependence of the thermal transformations in the fines of the chromium ore of the Donskoy Ore Mining and Processing Plant on the addition of silicate and aluminosilicate fluxes
Zhdanov A., Kaplun L., Petrova S., Nurmaganbetova B., Glinkina K.
PDF
(Eng)
Volume 2016, Nº 13 (2016)
Determination of the hardness and the mechanical properties of steel during melting, secondary refining, and continuous casting in an arc-furnace shop
Shishimirov M., Kokhan L.
PDF
(Eng)
Volume 2019, Nº 10 (2019)
Fabrication, Structure, and Mechanical Properties of Composite Oxide Fibers for Brittle-Matrix Composites
Kiiko V., Kolchin A., Novokhatskaya N.
PDF
(Eng)
Volume 2019, Nº 4 (2019)
Basic Principles of Alloying and Treatment of High-Nitrogen Austenitic Corrosion-Resistant Steels
Bannykh I., Glezer A.
PDF
(Eng)
26 - 50 de 60 resultados << < 1 2 3 > >> 
Dicas:
  • Palavras-chave são sensíveis a maiúsculas
  • Preposições e conjunções ingleses são ignoradas
  • Busca é feita por todos os palavras-chave (agente AND experimentador) por omissão
  • Use OR para pesquisar um termo exato, ex.: educação OR formação
  • Use parênteses para criar frases complexas, ex.: arquivo de ((revistas OR conferências) NOT teses)
  • Para pesquisar uma frase precisa use aspas duplas, ex.: "investigações científicas"
  • Exclua uma palavra utilizando o sinal - (hífen) ou operador NOT; ex.: concurso-de beleza ou concurso NOT de beleza
  • Use * como caractere-coringa, ex.: científic* recuperará as palavras "científico", "científicos", etc.

Este site utiliza cookies

Ao continuar usando nosso site, você concorda com o procedimento de cookies que mantêm o site funcionando normalmente.

Informação sobre cookies