Іздеу

Шығарылым
Атауы
Авторлар
Calculated Location of Carbon and Boron Atoms in the Crystal Structures of α- and γ-Nb5Si3
Kuz’mina N., Svetlov I., Marchenko E.
Distribution of the mechanical properties of semiproducts over their volume predicted as function of the technological parameters of hot metal forming
Galkin V., Golovkina M., Paltievich A.
Effect of the liquid phase on the formation of orthorhombic boride during the crystallization of Fe82B18 amorphous ribbons
Suslov A., Lad’yanov V.
Development of Gas Porosity along the Ion Range in Vanadium Alloys during Sequential Helium and Hydrogen Ion Irradiation
Stal’tsov M., Chernov I., Kalin B., Korshunov S., Lagov P.
Technology for the Deposition of Wear-Resistant Coatings on the Airfoil Shroud Platforms of GTE Turbine Blades
Abraimov N., Lukina V., Ivanova A.
New Universal Flaky Flux for Cast Magnesium Alloys
Leonov A., Duyunova V., Uridiya Z., Trofimov N.
Comparative Analysis of the Ternary Al–Si–X and Al–Cu–X (X = Sn, Pb, Bi, Cd, In) Systems in the Aluminum Alloy Range
Yakovleva O., Belov N.
Effect of High-Pressure Torsion on the Lattice Parameters of α-Fe and α-Fe-Based Solid Solutions
Zhukov O., Filippova V., Tomchuk A., Neumoin K., Basov S., Glezer A., Perlovich Y., Krymskaya O., Muradimova L.
Microstructural Model for the Deformation of Shape Memory Alloys
Movchan A., Mishustin I., Kazarina S.
Mechanical Properties of Mg–Dy–Sm–Zr Magnesium Alloys
Rokhlin L., Lukyanova E., Dobatkina T., Tarytina I., Korol’kova I.
Mechanical and functional properties of commercial alloy TN-1 semiproducts fabricated by warm rotary forging and ECAP
Andreev V., Yusupov V., Perkas M., Prosvirnin V., Shelest A., Prokoshkin S., Khmelevskaya I., Korotitskii A., Bondareva S., Karelin R.
Calcium hydride synthesis of Ti–Nb-based alloy powders
Kasimtsev A., Shuitsev A., Yudin S., Levinskii Y., Sviridova T., Alpatov A., Novosvetlova E.
Modifying ability of titanium-based pelleted master alloys
Bazhin V., Savchenkov S., Kosov Y.
Influence of aerothermoacoustic treatment on the structure and the properties of a TS6 titanium alloy
Remshev E., Danilin G., Vorob’eva G., Kuznetsov V.
Comparative Analysis of the Mechanical Properties of the Friction Stir Welding Joints of Various Aluminum Alloys
Ryl’kov E., Isupov F., Naumov A., Panchenko O., Zhabrev L.
Structure and High-Temperature Mechanical Properties of High-Carbon Niobium-Based Alloys
Karpov M., Prokhorov D., Vnukov V., Stroganova T., Gnesin B., Gnesin I., Zheltyakova I., Svetlov I.
Aging-Induced Hardening of Transition-Metal-Containing Al–Mg–Si Alloys Subjected to Deformation under Different Conditions
Bochvar N., Rokhlin L., Tarytina I., Leonova N.
Corrosion Resistance of Some Amorphous Metallic Fe–P–M (M = Si, Nb, Mo) Alloys: Effects of Composition, Structural Relaxation, Partial Crystallization, and Local Deformation
Ievlev V., Il’inova T., Kannykin S., Bobrinskaya E., Vavilova V., Serikov D., Kushchev S.
Effect of Cerium and Erbium on the Aging Kinetics and the Properties of an IMV7-1 Alloy of the Mg–Y–Gd–Zr System
Luk’yanova E., Dobatkina T., Tarytina I., Temralieva D., Ovchinnikova O., Rokhlin L.
Double-Coupled Problem of Buckling of the Shanley Column on Shape Memory Alloy Rods during the Reverse Martensite Transformation in a Constrained State
Movchan A., Dumanskii S.
Selective Dissolution of Brass in the Molten Eutectic Mixture of Lithium, Sodium, and Potassium Carbonates
Nikitina E., Kazakovtseva N., Tkachev N., Karfidov E., Maikov M., Malkov V.
Methods of Enhancing the Operating Characteristics of Gas-Turbine Blades
Ospennikova O., Visik E., Gerasimov V., Kolyadov E.
Effect of high-rate deformation on the structure, the properties, and the thermal stability of copper alloyed with chromium and zirconium
Khomskaya I., Zel’dovich V., Shorokhov E., Frolova N., Kheifets A., Dyakina V.
Structural heat-resistant β-NiAl + γ′-Ni3Al alloys of the Ni–Al–Co system: II. Oxidation
Povarova K., Drozdov A., Bazyleva O., Morozov A., Antonova A., Arginbaeva E., Alad’ev N., Sirotinkin V.
Thermodynamic description of the interaction processes in the Cu–Ce–O system in the temperature range 1100–1300°C
Samoilova O., Mikhailov G., Makrovets L., Trofimov E.
Нәтижелер 95 - 51/75 << < 1 2 3 4 > >> 
Сыбырсөздер:
  • Негізгі сөздер тіркелімге сезімтал< / li>
  • Ағылшын предлогтары мен одақтары еленбейді
  • Әдепкі бойынша іздеу барлық негізгі сөздер үшін жасалады (агенс AND экспериенцер)
  • Белгілі бір терминді табу үшін OR қолданыңыз. білім беру OR оқыту
  • мысалы, күрделі сөз тіркестерін жасау үшін жақшаларды қолданыңыз. мұрағат ((журналдар OR конференциялар) NOT диссертациялар)
  • Нақты фразаны табу үшін, мысалы, тырнақшаларды қолданыңыз. "ғылыми зерттеулер"
  • сөзді - (сызықша) немесе not операторының көмегімен алып тастаңыз; мысалы. сұлулық байқауы< / em > немесе сұлулық байқауы< / em > < / li>
  • мысалы, нұсқа ретінде * қолданыңыз. ғылым* "ғылыми","ғылыми"және т. б. сөздерді қамтиды< / li> < / < / к-сі>

Осы сайт cookie-файлдарды пайдаланады

Біздің сайтты пайдалануды жалғастыра отырып, сіз сайттың дұрыс жұмыс істеуін қамтамасыз ететін cookie файлдарын өңдеуге келісім бересіз.< / br>< / br>cookie файлдары туралы< / a>