Issue |
Title |
File |
Vol 62, No 4 (2019) |
Analysis of the Impact of Fan Blade Geometric Deviations on the Strength Properties |
(Eng)
|
Arkhipov A.N., Volgina M.V., Matushkin A.A., Ravikovich Y.A., Kholobtsev D.P.
|
Vol 62, No 4 (2019) |
On Estimating the Bearing Capacity of Spiral Wire Clamps |
(Eng)
|
Danilin A.N., Zhavoronok S.I., Rabinskii L.N.
|
Vol 62, No 4 (2019) |
Structural Optimization of Load-Bearing Heated Structures |
(Eng)
|
Kretov A.S., Shataev P.A.
|
Vol 62, No 4 (2019) |
An Integral Method of Surface Damping of Bending Vibrations for Thin-Walled Structures |
(Eng)
|
Paimushin V.N., Firsov V.A., Shishkin V.M.
|
Vol 62, No 3 (2019) |
Deformation of the Shell of the Cylindrical Cryogenic Tank during its Filling |
(Eng)
|
Zarubin V.S., Zimin V.N., Kuvyrkin G.N.
|
Vol 62, No 3 (2019) |
Effect of Surface Heat Exchange Intensifier Geometry on Heat Transfer Tube Strength |
(Eng)
|
Popov I.A., Shchelchkov A.V., Aksyanov R.A., Skrypnik A.N., Isaev S.A.
|
Vol 62, No 3 (2019) |
Numerical and Experiment Investigation of the Friction Coefficient in Gas Turbine Impeller Dovetail Joints |
(Eng)
|
Sapron D.V., Gukasyan S.G., Mezentsev M.A.
|
Vol 62, No 2 (2019) |
Dynamic Stability of an Orthotropic Cylindrical Shell of Piecewise Constant Thickness under the Action of External Pulsating Pressure |
(Eng)
|
Bakulin V.N., Nedbai A.Y., Shepeleva I.O.
|
Vol 62, No 2 (2019) |
Evaluation of the Stress State of a Box Shell Made from Material with Different Tensile and Compressive Properties |
(Eng)
|
Demidov A.S., Kashelkin V.V., Kapustin E.A.
|
Vol 62, No 1 (2019) |
Numerical Estimation of Weight Efficiency for Aircraft Composite Lattice Shells with Grid Parameter Variable over Height |
(Eng)
|
Bokuchava P.N., Evstaf’ev V.A., Babuk V.A.
|
Vol 62, No 1 (2019) |
Pseudoelasticity and Its Use for Design of Heated Thin-Walled Structures |
(Eng)
|
Wang Z.J., Kretov A.S., Shataev P.A.
|
Vol 62, No 1 (2019) |
Experimental Study of the Fatigue Stiffness Degradation for the Carbon Fiber Reinforced Plastic at Variable Temperature |
(Eng)
|
Fedotov A.A., Tsipenko A.E.
|
Vol 61, No 4 (2018) |
Deformation of an Elongated Thin-Shell Structure with a Dynamically Fracturing Thermal Protection Coating |
(Eng)
|
Antuf’ev B.A.
|
Vol 61, No 4 (2018) |
Effect of a Model and Boundary Conditions on the Results of Analyzing the Stress-Strain State of a Low-Pressure Compressor Rotor |
(Eng)
|
Arkhipov A.N., Volgina M.V., Matushkin A.A., Ravikovich Y.A., Kholobtsev D.P.
|
Vol 61, No 4 (2018) |
Flutter of a Laminated Cantilever Cylindrical Shell with a Ring-Stiffened Edge |
(Eng)
|
Bakulin V.N., Konopel’chev M.A., Nedbai A.Y.
|
Vol 61, No 4 (2018) |
Stress-Strain State and Buckling Problems of Structurally-Anisotropic Aircraft Panels Made of Composite Materials in View of Production Technology |
(Eng)
|
Boitsov B.V., Gavva L.M., Endogur A.I., Firsanov V.V.
|
Vol 61, No 4 (2018) |
Study of the Local Strength of the Main Rotor Torsion Bar under the Action of Flight and Test Bench Loads |
(Eng)
|
Mitryaikin V.I., Shuvalov V.A.
|
Vol 61, No 4 (2018) |
Modeling the Parachute System Deployment for the Rescue System of a Normal Category Airplane |
(Eng)
|
Ledyankina O.A., Mikhailov S.A., Nedel’ko D.V.
|
Vol 61, No 4 (2018) |
A Technique of Calculating a Load-Bearing Frame of Aircraft Passenger Seat Unit in Virtual Certification Tests |
(Eng)
|
Shabalin L.P., Sidorov I.N., Khaliulin V.I., Gorelov A.V.
|
Vol 61, No 3 (2018) |
Nonlinear Fracture Resistance Parameters for Elements of Aviation Structures under Biaxial Loading |
(Eng)
|
Shlyannikov V.N., Zakharov A.P., Tumanov A.V.
|
Vol 61, No 2 (2018) |
The Stressed State of a Stiffened Conical Shell with Thermal Protective Coating with Temperature-Dependent Properties |
(Eng)
|
Bakulin V.N., Vinogradov Y.I., Men’kov G.B.
|
Vol 61, No 2 (2018) |
Investigation of Buckling Behavior for Thin-Walled Bearing Aircraft Structural Elements with Cutouts by Means of Numerical Simulation |
(Eng)
|
Dmitriev V.G., Egorova O.V., Zhavoronok S.I., Rabinskii L.N.
|
Vol 61, No 2 (2018) |
Nonlinear Deformation and Stability of Discrete-Reinforced Elliptical Cylindrical Composite Shells under Torsion and Internal Pressure |
(Eng)
|
Zheleznov L.P., Kabanov V.V., Boiko D.V.
|
Vol 61, No 2 (2018) |
A Method for Designing the Helicopter Skid Landing Gear by a Criterion of Landing Impact Energy Absorption |
(Eng)
|
Nedel’ko D.V., Alimov S.A.
|
Vol 61, No 2 (2018) |
Possible Areas of Splitting the Flexural Frequency Spectrum of Shells with Asymmetric Shape Imperfections |
(Eng)
|
Seregin S.V.
|
1 - 25 of 48 Items |
1 2 > >>
|