Выпуск |
Название |
Файл |
Том 62, № 4 (2019) |
Analysis of the Impact of Fan Blade Geometric Deviations on the Strength Properties |
(Eng)
|
Arkhipov A., Volgina M., Matushkin A., Ravikovich Y., Kholobtsev D.
|
Том 62, № 4 (2019) |
On Estimating the Bearing Capacity of Spiral Wire Clamps |
(Eng)
|
Danilin A., Zhavoronok S., Rabinskii L.
|
Том 62, № 4 (2019) |
Structural Optimization of Load-Bearing Heated Structures |
(Eng)
|
Kretov A., Shataev P.
|
Том 62, № 4 (2019) |
An Integral Method of Surface Damping of Bending Vibrations for Thin-Walled Structures |
(Eng)
|
Paimushin V., Firsov V., Shishkin V.
|
Том 62, № 3 (2019) |
Deformation of the Shell of the Cylindrical Cryogenic Tank during its Filling |
(Eng)
|
Zarubin V., Zimin V., Kuvyrkin G.
|
Том 62, № 3 (2019) |
Effect of Surface Heat Exchange Intensifier Geometry on Heat Transfer Tube Strength |
(Eng)
|
Popov I., Shchelchkov A., Aksyanov R., Skrypnik A., Isaev S.
|
Том 62, № 3 (2019) |
Numerical and Experiment Investigation of the Friction Coefficient in Gas Turbine Impeller Dovetail Joints |
(Eng)
|
Sapron D., Gukasyan S., Mezentsev M.
|
Том 62, № 2 (2019) |
Dynamic Stability of an Orthotropic Cylindrical Shell of Piecewise Constant Thickness under the Action of External Pulsating Pressure |
(Eng)
|
Bakulin V., Nedbai A., Shepeleva I.
|
Том 62, № 2 (2019) |
Evaluation of the Stress State of a Box Shell Made from Material with Different Tensile and Compressive Properties |
(Eng)
|
Demidov A., Kashelkin V., Kapustin E.
|
Том 62, № 1 (2019) |
Numerical Estimation of Weight Efficiency for Aircraft Composite Lattice Shells with Grid Parameter Variable over Height |
(Eng)
|
Bokuchava P., Evstaf’ev V., Babuk V.
|
Том 62, № 1 (2019) |
Pseudoelasticity and Its Use for Design of Heated Thin-Walled Structures |
(Eng)
|
Wang Z., Kretov A., Shataev P.
|
Том 62, № 1 (2019) |
Experimental Study of the Fatigue Stiffness Degradation for the Carbon Fiber Reinforced Plastic at Variable Temperature |
(Eng)
|
Fedotov A., Tsipenko A.
|
Том 61, № 4 (2018) |
Modeling the Parachute System Deployment for the Rescue System of a Normal Category Airplane |
(Eng)
|
Ledyankina O., Mikhailov S., Nedel’ko D.
|
Том 61, № 4 (2018) |
A Technique of Calculating a Load-Bearing Frame of Aircraft Passenger Seat Unit in Virtual Certification Tests |
(Eng)
|
Shabalin L., Sidorov I., Khaliulin V., Gorelov A.
|
Том 61, № 4 (2018) |
Deformation of an Elongated Thin-Shell Structure with a Dynamically Fracturing Thermal Protection Coating |
(Eng)
|
Antuf’ev B.
|
Том 61, № 4 (2018) |
Effect of a Model and Boundary Conditions on the Results of Analyzing the Stress-Strain State of a Low-Pressure Compressor Rotor |
(Eng)
|
Arkhipov A., Volgina M., Matushkin A., Ravikovich Y., Kholobtsev D.
|
Том 61, № 4 (2018) |
Flutter of a Laminated Cantilever Cylindrical Shell with a Ring-Stiffened Edge |
(Eng)
|
Bakulin V., Konopel’chev M., Nedbai A.
|
Том 61, № 4 (2018) |
Stress-Strain State and Buckling Problems of Structurally-Anisotropic Aircraft Panels Made of Composite Materials in View of Production Technology |
(Eng)
|
Boitsov B., Gavva L., Endogur A., Firsanov V.
|
Том 61, № 4 (2018) |
Study of the Local Strength of the Main Rotor Torsion Bar under the Action of Flight and Test Bench Loads |
(Eng)
|
Mitryaikin V., Shuvalov V.
|
Том 61, № 3 (2018) |
Nonlinear Fracture Resistance Parameters for Elements of Aviation Structures under Biaxial Loading |
(Eng)
|
Shlyannikov V., Zakharov A., Tumanov A.
|
Том 61, № 2 (2018) |
The Stressed State of a Stiffened Conical Shell with Thermal Protective Coating with Temperature-Dependent Properties |
(Eng)
|
Bakulin V., Vinogradov Y., Men’kov G.
|
Том 61, № 2 (2018) |
Investigation of Buckling Behavior for Thin-Walled Bearing Aircraft Structural Elements with Cutouts by Means of Numerical Simulation |
(Eng)
|
Dmitriev V., Egorova O., Zhavoronok S., Rabinskii L.
|
Том 61, № 2 (2018) |
Nonlinear Deformation and Stability of Discrete-Reinforced Elliptical Cylindrical Composite Shells under Torsion and Internal Pressure |
(Eng)
|
Zheleznov L., Kabanov V., Boiko D.
|
Том 61, № 2 (2018) |
A Method for Designing the Helicopter Skid Landing Gear by a Criterion of Landing Impact Energy Absorption |
(Eng)
|
Nedel’ko D., Alimov S.
|
Том 61, № 2 (2018) |
Possible Areas of Splitting the Flexural Frequency Spectrum of Shells with Asymmetric Shape Imperfections |
(Eng)
|
Seregin S.
|
1 - 25 из 48 результатов |
1 2 > >>
|