检索

标题
作者
Determination of the Crack Tip Position by Digital Image Correlation during Static and Cyclic Fracture Toughness Tests of Aluminum Alloys
Avtaev V., Yakovlev N., Erasov V., Podzhivotov N.
Heterogeneous structure and fracture of iron-based alloys and their measurement
Kudrya A., Sokolovskaya E., Akhmedova T., Perezhogin V.
Changes in the fracture strength parameters of ferritic–bainitic and bainitic pipe steels during operation
Zikeev V., Filippov G., Shabalov I., Livanova O., Solov’ev D.
Forces and strains during drop weight tear test
Shtremel’ M., Arabei A., Glebov A., Abakumov A., Esiev T., Struin A., Sarychev B.
Fracture Resistance Factors of Iron-Based Hard Alloys
Kudrya A., Sokolovskaya E., Akhmedova T.
Technology for the Deposition of Wear-Resistant Coatings on the Airfoil Shroud Platforms of GTE Turbine Blades
Abraimov N., Lukina V., Ivanova A.
Interdisciplinary Problems of Fracture Physics and Mechanics: From Metals to Rocks. I. Damage Localization and Development
Botvina L., Zavyalov A.
Fracture toughness of as-cast freight bogie solebars after volume–surface quenching
Belov V., Nikitin A., Anikeenko V., Armizonov A., Rogachev S.
Influence of heat treatment on the efficiency of impact fragmentation of amorphous alloy Fe73.5Cu1Nb3Si13.5B9 ribbons
Kuznetsov P., Samodelkin E., Klimov V., Kashirina A.
Structure and Mechanical Properties of High-Strength Structural Steels
Bannykh O., Sorokin A., Bannykh I., Lukin E.
Effect of deformation and heat treatment on the structure, the mechanical properties, and the fracture characteristics of an ultrafine-grained Zr–1Nb alloy
Vinokurov V., Grabovetskaya G., Stepanova E., Mishin I.
Corrosion Cracking of Steels of Various Strengths at a Constant Crack Opening
Grinevich A., Yakovlev N., Skripachev S., Nuzhnyi G.
Behavior of an Austenitic–Martensitic VNS9-Sh Sheet TRIP Steel during Static and Cyclic Deformation
Teren’tev V., Prosvirnin D., Slizov A., Kobeleva L., Marchenkov A., Ashmarin A., Sirotinkin V.
Mechanical properties of the welded joints of 1565ch alloy sheets at low temperatures
Ovchinnikov V., Drits A., Gureeva M., Malov D., Rastopchin R.
Method for calculating the limiting technological residual stresses in a tubular billet
Kolmogorov G., Kuznetsova E.
Predicting the Fracture of Large Forgings with a Heterogeneous Structure
Kudrya A., Sokolovskaya E., Ngo K., Kuz’ko E., Kotishevskii G.
Fatigue Strength of an AlSi10Mg Alloy Fabricated by Selective Laser Melting
Gerov M., Vladislavskaya E., Terent’ev V., Prosvirnin D., Antonova O., Kolmakov A.
Possibility to Strengthen the Joint between a Titanium Alloy and Stainless Steel Formed by Diffusion Welding through an Interlayer
Khazgaliev R., Imayev M., Mulyukov R.
Study of the fracture kinetics in structural aluminum alloys subjected to a long-term action of a static load and a corrosive medium using specimens of a new type
Kablov E., Grinevich A., Lutsenko A., Erasov V., Nuzhnyi G., Gulina I.
Causes and Mechanisms of Fracture of a Main Line Section Made of 17G1S Steel
Goritskii V., Shneiderov G., Durneva A.
Influence of the Crystallographic Texture of Aluminum Sheets on the Fracture Toughness of Metal–Polymer Composite Materials
Grechnikov F., Erisov Y., Petrov I.
Changes in the Physical Properties and the Damage of Low- and Medium-Carbon Steels during Tension
Tyutin M., Botvina L., Sinev I.
Mathematical simulation of pressing X-ray lenses from nanocrystalline beryllium
Mishin V., Shishov I., Glukhov P., Zabrodin A., Semenov A., Brylev D., Anikin A.
Structure and Mechanical Properties of the Layered Composites Made of Multicomponent Niobium Alloys and Hardening Silicon–Carbon Compounds Formed by Solid-Phase Sintering
Korzhov V., Kiiko V., Zheltyakova I.
Brittle Fracture of a Material upon Microcutting of the Workpiece Surface by the Microrelief Protrusions of Loose Abrasive Grains
Skryabin V., Zverovshchikov A., Zotov E.
1 - 25 的 35 信息 1 2 > >> 

检索提示:

  • 检索的名词区分大小写
  • 常用字词将被忽略
  • 默认情况下只有在查询结果满足所有检索词才返回(例如,隐含AND)
  • 使用OR结合多个检索词,便于查找含有这些检索词的文章,例如education OR research
  • 使用括号来创建更复杂的查询; 例如:archive ((journal OR conference) NOT theses)
  • 使用引号检索一个完整的词组; 例如: "open access publishing"
  • 使用-或者NOT排除一个检索词; 例如:online -politics or online NOT politics
  • 在检索词里使用 *作为通配符匹配任何字符序列; 例如., soci* morality 将符合含有 "sociological" or "societal"的词语
##common.cookie##