Email this article Fracture toughness of as-cast freight bogie solebars after volume–surface quenching
- Authors: Belov V.A.1, Nikitin A.V.1, Anikeenko V.I.1, Armizonov A.A.2, Rogachev S.O.1
-
Affiliations:
- National University of Science and Technology MISiS
- OOO MIIT Inzhiniring
- Issue: Vol 2017, No 10 (2017)
- Pages: 874-878
- Section: Applied Problems of Strength and Plasticity
- URL: https://journals.rcsi.science/0036-0295/article/view/171783
- DOI: https://doi.org/10.1134/S0036029517100032
- ID: 171783
Cite item
Open Access
Access granted
Subscription Access
Abstract
The fracture toughness of freight bogie solebars made of low-carbon 20GFL steel is studied in the normalized state and after volume–surface quenching (VSQ). The fracture strength is estimated using acoustic emission and the critical J integral. VSQ is shown to increase Jc of the solebar material by a factor of ≈1.5, and its static strength is higher than that after normalization by ≈1.7 times.
About the authors
V. A. Belov
National University of Science and Technology MISiS
Email: csaap@mail.ru
Russian Federation, Leninskii pr. 4, Moscow, 119049
A. V. Nikitin
National University of Science and Technology MISiS
Email: csaap@mail.ru
Russian Federation, Leninskii pr. 4, Moscow, 119049
V. I. Anikeenko
National University of Science and Technology MISiS
Email: csaap@mail.ru
Russian Federation, Leninskii pr. 4, Moscow, 119049
A. A. Armizonov
OOO MIIT Inzhiniring
Email: csaap@mail.ru
Russian Federation, Moscow, 127055
S. O. Rogachev
National University of Science and Technology MISiS
Author for correspondence.
Email: csaap@mail.ru
Russian Federation, Leninskii pr. 4, Moscow, 119049
