检索

期
标题
作者
卷 2019, 编号 7 (2019)
Technological Schemes and Conditions for the Production of Rolling Rings from Hollow As-Cast Blanks
Kostyshev V., Erisov Y.
PDF
(Eng)
卷 2019, 编号 2 (2019)
Calorimetric Study of the Formation of Liquid Ag–Cu–Sn Alloys. Enthalpy of Mixing for the Boundary Binary Cu–Ag, Cu–Sn, and Ag–Sn Systems at 1150°C
Oleinik K., Bykov A.
PDF
(Eng)
卷 2019, 编号 8 (2019)
Thermal Analysis of the Fabrication of Magnesium Master Alloys Containing Yttrium and Zinc
Savchenkov S., Bazhin V., Brichkin V., Ugolkov V.
PDF
(Eng)
卷 2018, 编号 4 (2018)
Structure Formation and Hardening of the Hybrid Material Based on Vanadium and Zirconium Alloys during High-Pressure Torsion
Rogachev S., Nikulin S., Khatkevich V., Tabachkova N., Sundeev R.
PDF
(Eng)
卷 2019, 编号 13 (2019)
Elemental Composition and Microhardness of the Coatings Prepared on Faced Aluminum Alloys by Plasma Electrolytic Oxidation in a Silicate–Alkaline Electrolyte
Kolomeichenko A., Kravchenko I.
PDF
(Eng)
卷 2019, 编号 10 (2019)
Effect of Thermohydrogen Treatment on the Manufacturing and Mechanical Properties of a Heat-Resistant VTI-4 Intermetallic Alloy
Skvortsova S., Pozhoga O., Ovchinnikov A., Orlov A.
PDF
(Eng)
卷 2019, 编号 6 (2019)
Conditions of Air Shot Hardening of VT41 Titanium Alloy Blisk Blades for an Advanced Engine
Yakovlev M., Kyaramyan K., Shirvan’yants G.
PDF
(Eng)
卷 2018, 编号 11 (2018)
Structure and Properties of the Solid-Phase Joints of a Wrought EP975 Nickel Alloy and a Single-Crystal Intermetallic VKNA-25 Alloy Formed by Pressure Welding at a Strain of 24% under the Superplasticity of the EP975 Alloy
Galieva E., Povarova K., Drozdov A., Valitov V.
PDF
(Eng)
卷 2018, 编号 6 (2018)
Effect of the Heat-Treatment Conditions on the Structure and Mechanical Properties of the Base and Weld Materials of the VT41 Alloy Blisks in the HPC of an Advanced Engine
Nochovnaya N., Kashapov O., Bykov Y., Kyaramyan K.
PDF
(Eng)
卷 2018, 编号 4 (2018)
Phase Composition, Texture, and Residual Stresses in Al–Cu–Li Friction Stir Welds
Betsofen S., Lukin V., Dolgova M., Panteleev M., Kabanova Y.
PDF
(Eng)
卷 2018, 编号 1 (2018)
Formation of Gradient Structures in the Zone of Joining a Deformable Nickel Alloy and a Single-Crystal Intermetallic Alloy during Thermodiffusion Pressure Welding and Subsequent Heat Treatment
Povarova K., Valitov V., Drozdov A., Bazyleva O., Galieva E., Arginbaeva E.
PDF
(Eng)
卷 2017, 编号 11 (2017)
Electrochemical Behavior of an Amorphous and Nanocrystalline Fe79P13Si5V3 Alloy in a Damp SO2-Contaminated Atmosphere
Vavilova V., Korneev V., Gavrilov D., Anosova M.
PDF
(Eng)
卷 2017, 编号 7 (2017)
Solidification of the eutectic Sn–43 mol % Bi alloy
Aleksandrov V., Frolova S., Zozulya A.
PDF
(Eng)
卷 2017, 编号 3 (2017)
Solid-state oxidation kinetics of an yttrium-containing AK1M2 alloy
Berdiev A., Ganiev I., Niezov K.
PDF
(Eng)
卷 2016, 编号 8 (2016)
Choice of quenching temperature and its effect on the structure and properties of a high-strength grade 01979 aluminum alloy
Kuptsov S., Elantsev A., Nikonenko E., Nikitina E.
PDF
(Eng)
卷 2019, 编号 12 (2019)
Simulation of the Heat Treatment of the Welded Joints in a High-Pressure Compressor
Kyaramyan K., Lomberg B., Bakradze M., Isaev D., Bykov Y., Mazalov I.
PDF
(Eng)
卷 2019, 编号 10 (2019)
Evolution of the Multiscale Hierarchical Structure of Defects in a Melt-Quenched Fe70Cr15B15(Sn) Alloy during Low-Temperature Annealing
Pisarenko T., Frolov A., Krainova G.
PDF
(Eng)
卷 2019, 编号 5 (2019)
Development of Fatigue Damages in a Pseudo-α-Titanium Alloy after Intense Thermomechanical Treatment
Bagmutov V., Vodop’yanov V., Zakharov I., Vdovenko A., Romanenko M., Chekunov V.
PDF
(Eng)
卷 2019, 编号 2 (2019)
Influence of Niobium and Tantalum on the Phase Formation during the Metallothermic Interaction of Aluminum with Titanium Dioxide
Osinkina T., Krasikov S., Zhilina E., Agafonov S., Vedmid’ L., Zhidovinova S.
PDF
(Eng)
卷 2018, 编号 11 (2018)
Phase Composition Formation in a V-1469 Alloy (Al–Cu–Li System) during Friction Stir Welding
Betsofen S., Sbitneva S., Panteleev M., Bakradze M., Gordeeva M., Knyazeva Y.
PDF
(Eng)
卷 2018, 编号 6 (2018)
Microstructure of the Joint of 1565chM Alloy Sheets Fabricated by Friction Stir Welding
Ovchinnikov V., Badall N.
PDF
(Eng)
卷 2018, 编号 3 (2018)
Rheological Properties and Similarity Conditions in Simulating the Upsetting of a Titanium Alloy VT20 Billet: II. Simulation of the Upsetting of Experimental Samples and Virtual Billets
Nosov V., Ermakov E., Nesterov P., Shchugorev Y., Zakharov A.
PDF
(Eng)
卷 2018, 编号 1 (2018)
Solid-State Oxidation Kinetics of a Lanthanum-Modified Al + 6% Li Alloy
Nazarov S., Ganiev I., Calliari I., Berdiev A., Ganieva N.
PDF
(Eng)
卷 2017, 编号 11 (2017)
Structure and Mechanical and Corrosion Properties of a Magnesium Mg–Y–Nd–Zr Alloy after High Pressure Torsion
Lukyanova E., Martynenko N., Serebryany V., Belyakov A., Rokhlin L., Dobatkin S., Estrin Y.
PDF
(Eng)
卷 2017, 编号 7 (2017)
Viscosity of the liquid Al–6Mg–1Mn–0.2Sc–0.1Zr alloy
Reznik P., Chikova O., Tsepelev V.
PDF
(Eng)
1 - 25 的 94 信息 1 2 3 4 > >> 

检索提示:

  • 检索的名词区分大小写
  • 常用字词将被忽略
  • 默认情况下只有在查询结果满足所有检索词才返回（例如，隐含AND）
  • 使用OR结合多个检索词，便于查找含有这些检索词的文章，例如education OR research
  • 使用括号来创建更复杂的查询; 例如：archive ((journal OR conference) NOT theses)
  • 使用引号检索一个完整的词组; 例如： "open access publishing"
  • 使用-或者NOT排除一个检索词; 例如：online -politics or online NOT politics
  • 在检索词里使用 *作为通配符匹配任何字符序列; 例如., soci* morality 将符合含有 "sociological" or "societal"的词语
##common.cookie##