Поиск

Выпуск
Название
Авторы
Том 2019, № 7 (2019)
Technological Schemes and Conditions for the Production of Rolling Rings from Hollow As-Cast Blanks
Kostyshev V., Erisov Y.
PDF
(Eng)
Том 2019, № 2 (2019)
Calorimetric Study of the Formation of Liquid Ag–Cu–Sn Alloys. Enthalpy of Mixing for the Boundary Binary Cu–Ag, Cu–Sn, and Ag–Sn Systems at 1150°C
Oleinik K., Bykov A.
PDF
(Eng)
Том 2019, № 8 (2019)
Thermal Analysis of the Fabrication of Magnesium Master Alloys Containing Yttrium and Zinc
Savchenkov S., Bazhin V., Brichkin V., Ugolkov V.
PDF
(Eng)
Том 2018, № 4 (2018)
Structure Formation and Hardening of the Hybrid Material Based on Vanadium and Zirconium Alloys during High-Pressure Torsion
Rogachev S., Nikulin S., Khatkevich V., Tabachkova N., Sundeev R.
PDF
(Eng)
Том 2019, № 13 (2019)
Elemental Composition and Microhardness of the Coatings Prepared on Faced Aluminum Alloys by Plasma Electrolytic Oxidation in a Silicate–Alkaline Electrolyte
Kolomeichenko A., Kravchenko I.
PDF
(Eng)
Том 2019, № 10 (2019)
Effect of Thermohydrogen Treatment on the Manufacturing and Mechanical Properties of a Heat-Resistant VTI-4 Intermetallic Alloy
Skvortsova S., Pozhoga O., Ovchinnikov A., Orlov A.
PDF
(Eng)
Том 2019, № 6 (2019)
Conditions of Air Shot Hardening of VT41 Titanium Alloy Blisk Blades for an Advanced Engine
Yakovlev M., Kyaramyan K., Shirvan’yants G.
PDF
(Eng)
Том 2018, № 11 (2018)
Structure and Properties of the Solid-Phase Joints of a Wrought EP975 Nickel Alloy and a Single-Crystal Intermetallic VKNA-25 Alloy Formed by Pressure Welding at a Strain of 24% under the Superplasticity of the EP975 Alloy
Galieva E., Povarova K., Drozdov A., Valitov V.
PDF
(Eng)
Том 2018, № 6 (2018)
Effect of the Heat-Treatment Conditions on the Structure and Mechanical Properties of the Base and Weld Materials of the VT41 Alloy Blisks in the HPC of an Advanced Engine
Nochovnaya N., Kashapov O., Bykov Y., Kyaramyan K.
PDF
(Eng)
Том 2018, № 4 (2018)
Phase Composition, Texture, and Residual Stresses in Al–Cu–Li Friction Stir Welds
Betsofen S., Lukin V., Dolgova M., Panteleev M., Kabanova Y.
PDF
(Eng)
Том 2018, № 1 (2018)
Formation of Gradient Structures in the Zone of Joining a Deformable Nickel Alloy and a Single-Crystal Intermetallic Alloy during Thermodiffusion Pressure Welding and Subsequent Heat Treatment
Povarova K., Valitov V., Drozdov A., Bazyleva O., Galieva E., Arginbaeva E.
PDF
(Eng)
Том 2017, № 11 (2017)
Electrochemical Behavior of an Amorphous and Nanocrystalline Fe79P13Si5V3 Alloy in a Damp SO2-Contaminated Atmosphere
Vavilova V., Korneev V., Gavrilov D., Anosova M.
PDF
(Eng)
Том 2017, № 7 (2017)
Solidification of the eutectic Sn–43 mol % Bi alloy
Aleksandrov V., Frolova S., Zozulya A.
PDF
(Eng)
Том 2017, № 3 (2017)
Solid-state oxidation kinetics of an yttrium-containing AK1M2 alloy
Berdiev A., Ganiev I., Niezov K.
PDF
(Eng)
Том 2016, № 8 (2016)
Choice of quenching temperature and its effect on the structure and properties of a high-strength grade 01979 aluminum alloy
Kuptsov S., Elantsev A., Nikonenko E., Nikitina E.
PDF
(Eng)
Том 2019, № 12 (2019)
Simulation of the Heat Treatment of the Welded Joints in a High-Pressure Compressor
Kyaramyan K., Lomberg B., Bakradze M., Isaev D., Bykov Y., Mazalov I.
PDF
(Eng)
Том 2019, № 10 (2019)
Evolution of the Multiscale Hierarchical Structure of Defects in a Melt-Quenched Fe70Cr15B15(Sn) Alloy during Low-Temperature Annealing
Pisarenko T., Frolov A., Krainova G.
PDF
(Eng)
Том 2019, № 5 (2019)
Development of Fatigue Damages in a Pseudo-α-Titanium Alloy after Intense Thermomechanical Treatment
Bagmutov V., Vodop’yanov V., Zakharov I., Vdovenko A., Romanenko M., Chekunov V.
PDF
(Eng)
Том 2019, № 2 (2019)
Influence of Niobium and Tantalum on the Phase Formation during the Metallothermic Interaction of Aluminum with Titanium Dioxide
Osinkina T., Krasikov S., Zhilina E., Agafonov S., Vedmid’ L., Zhidovinova S.
PDF
(Eng)
Том 2018, № 11 (2018)
Phase Composition Formation in a V-1469 Alloy (Al–Cu–Li System) during Friction Stir Welding
Betsofen S., Sbitneva S., Panteleev M., Bakradze M., Gordeeva M., Knyazeva Y.
PDF
(Eng)
Том 2018, № 6 (2018)
Microstructure of the Joint of 1565chM Alloy Sheets Fabricated by Friction Stir Welding
Ovchinnikov V., Badall N.
PDF
(Eng)
Том 2018, № 3 (2018)
Rheological Properties and Similarity Conditions in Simulating the Upsetting of a Titanium Alloy VT20 Billet: II. Simulation of the Upsetting of Experimental Samples and Virtual Billets
Nosov V., Ermakov E., Nesterov P., Shchugorev Y., Zakharov A.
PDF
(Eng)
Том 2018, № 1 (2018)
Solid-State Oxidation Kinetics of a Lanthanum-Modified Al + 6% Li Alloy
Nazarov S., Ganiev I., Calliari I., Berdiev A., Ganieva N.
PDF
(Eng)
Том 2017, № 11 (2017)
Structure and Mechanical and Corrosion Properties of a Magnesium Mg–Y–Nd–Zr Alloy after High Pressure Torsion
Lukyanova E., Martynenko N., Serebryany V., Belyakov A., Rokhlin L., Dobatkin S., Estrin Y.
PDF
(Eng)
Том 2017, № 7 (2017)
Viscosity of the liquid Al–6Mg–1Mn–0.2Sc–0.1Zr alloy
Reznik P., Chikova O., Tsepelev V.
PDF
(Eng)
1 - 25 из 94 результатов 1 2 3 4 > >> 
Подсказки:
  • Ключевые слова чувствительны к регистру
  • Английские предлоги и союзы игнорируются
  • По умолчанию поиск проводится по всем ключевым словам (агенс AND экспериенцер)
  • Используйте OR для поиска того или иного термина, напр. образование OR обучение
  • Используйте скобки для создания сложных фраз, напр. архив ((журналов OR конференций) NOT диссертаций)
  • Для поиска точной фразы используйте кавычки, напр. "научные исследования"
  • Исключайте слово при помощи знака - (дефис) или оператора NOT; напр. конкурс -красоты или же конкурс NOT красоты
  • Используйте * в качестве версификатора, напр. научн* охватит слова "научный", "научные" и т.д.

Данный сайт использует cookie-файлы

Продолжая использовать наш сайт, вы даете согласие на обработку файлов cookie, которые обеспечивают правильную работу сайта.

О куки-файлах