Поиск

Выпуск
Название
Авторы
Том 2016, № 10 (2016)
Changes in the fracture strength parameters of ferritic–bainitic and bainitic pipe steels during operation
Zikeev V., Filippov G., Shabalov I., Livanova O., Solov’ev D.
PDF
(Eng)
Том 2017, № 4 (2017)
Forces and strains during drop weight tear test
Shtremel’ M., Arabei A., Glebov A., Abakumov A., Esiev T., Struin A., Sarychev B.
PDF
(Eng)
Том 2017, № 12 (2017)
Fracture Resistance Factors of Iron-Based Hard Alloys
Kudrya A., Sokolovskaya E., Akhmedova T.
PDF
(Eng)
Том 2019, № 4 (2019)
Determination of the Crack Tip Position by Digital Image Correlation during Static and Cyclic Fracture Toughness Tests of Aluminum Alloys
Avtaev V., Yakovlev N., Erasov V., Podzhivotov N.
PDF
(Eng)
Том 2017, № 6 (2017)
Heterogeneous structure and fracture of iron-based alloys and their measurement
Kudrya A., Sokolovskaya E., Akhmedova T., Perezhogin V.
PDF
(Eng)
Том 2019, № 12 (2019)
Predicting the Fracture of Large Forgings with a Heterogeneous Structure
Kudrya A., Sokolovskaya E., Ngo K., Kuz’ko E., Kotishevskii G.
PDF
(Eng)
Том 2019, № 4 (2019)
Fatigue Strength of an AlSi10Mg Alloy Fabricated by Selective Laser Melting
Gerov M., Vladislavskaya E., Terent’ev V., Prosvirnin D., Antonova O., Kolmakov A.
PDF
(Eng)
Том 2018, № 4 (2018)
Possibility to Strengthen the Joint between a Titanium Alloy and Stainless Steel Formed by Diffusion Welding through an Interlayer
Khazgaliev R., Imayev M., Mulyukov R.
PDF
(Eng)
Том 2017, № 4 (2017)
Study of the fracture kinetics in structural aluminum alloys subjected to a long-term action of a static load and a corrosive medium using specimens of a new type
Kablov E., Grinevich A., Lutsenko A., Erasov V., Nuzhnyi G., Gulina I.
PDF
(Eng)
Том 2019, № 10 (2019)
Causes and Mechanisms of Fracture of a Main Line Section Made of 17G1S Steel
Goritskii V., Shneiderov G., Durneva A.
PDF
(Eng)
Том 2019, № 4 (2019)
Influence of the Crystallographic Texture of Aluminum Sheets on the Fracture Toughness of Metal–Polymer Composite Materials
Grechnikov F., Erisov Y., Petrov I.
PDF
(Eng)
Том 2018, № 7 (2018)
Changes in the Physical Properties and the Damage of Low- and Medium-Carbon Steels during Tension
Tyutin M., Botvina L., Sinev I.
PDF
(Eng)
Том 2016, № 10 (2016)
Mathematical simulation of pressing X-ray lenses from nanocrystalline beryllium
Mishin V., Shishov I., Glukhov P., Zabrodin A., Semenov A., Brylev D., Anikin A.
PDF
(Eng)
Том 2019, № 10 (2019)
Structure and Mechanical Properties of the Layered Composites Made of Multicomponent Niobium Alloys and Hardening Silicon–Carbon Compounds Formed by Solid-Phase Sintering
Korzhov V., Kiiko V., Zheltyakova I.
PDF
(Eng)
Том 2018, № 13 (2018)
Brittle Fracture of a Material upon Microcutting of the Workpiece Surface by the Microrelief Protrusions of Loose Abrasive Grains
Skryabin V., Zverovshchikov A., Zotov E.
PDF
(Eng)
Том 2018, № 7 (2018)
Structure and Phase Formation in the Mo–Si–Al–Zr–N System during the Formation of Arc-PVD Coatings and Their Properties
Blinkov I., Chernogor A., Volkhonskii A., Levinskii Y., Sergevnin V., Belov D.
PDF
(Eng)
Том 2017, № 4 (2017)
Estimation of the resistance to the initiation of fatigue cracks in the welded joints of steel constructions
Odesskii P., Shuvalov A., Emel’yanov O.
PDF
(Eng)
Том 2016, № 10 (2016)
Fatigue strength of a Ti–6Al–4V alloy produced by selective laser melting
Gerov M., Vladislavskaya E., Terent’ev V., Prosvirnin D., Kolmakov A., Antonova O.
PDF
(Eng)
Том 2019, № 10 (2019)
Estimation of the Local State of Stress and Strains in Stress Concentration Zones in a Wide Strain Range
Makhutov N., Reznikov D.
PDF
(Eng)
Том 2018, № 10 (2018)
Numerical Simulation of the Loss of Stability of a Set of Cracks
Mel’nichenko A.
PDF
(Eng)
Том 2017, № 4 (2017)
Ensemble of secondary cracks near the fatigue fracture surface of a titanium alloy VT23M specimen
Lavrov A., Erasov V., Nochovnaya N., Kotova E.
PDF
(Eng)
Том 2019, № 7 (2019)
Effect of Temperature on the Low-Cycle Fatigue Characteristics of Single Crystals Made of an Ni3Al-Based Rhenium-Containing Intermetallic Alloy
Povarova K., Bazyleva O., Gorbovets M., Drozdov A., Bulakhtina M.
PDF
(Eng)
Том 2018, № 10 (2018)
Interdisciplinary Problems of Fracture Physics and Mechanics: From Metals to Rocks. II. Fracture Criteria
Botvina L., Zavyalov A.
PDF
(Eng)
Том 2017, № 10 (2017)
Analysis of the fracture kinetics and mechanisms of 20GL steel having different strengths using the acoustic emission parameters
Nikulin S., Khanzhin V., Nikitin A., Turilina V., Zabolotnikova V.
PDF
(Eng)
Том 2017, № 4 (2017)
Effect of volume–surface quenching on the impact toughness of 20GL steel intended for cast freight bogie solebars
Nikulin S., Rozhnov A., Turilina V., Zabolotnikova V., Komissarov A., Nechaikina T.
PDF
(Eng)
1 - 25 из 35 результатов 1 2 > >> 
Подсказки:
  • Ключевые слова чувствительны к регистру
  • Английские предлоги и союзы игнорируются
  • По умолчанию поиск проводится по всем ключевым словам (агенс AND экспериенцер)
  • Используйте OR для поиска того или иного термина, напр. образование OR обучение
  • Используйте скобки для создания сложных фраз, напр. архив ((журналов OR конференций) NOT диссертаций)
  • Для поиска точной фразы используйте кавычки, напр. "научные исследования"
  • Исключайте слово при помощи знака - (дефис) или оператора NOT; напр. конкурс -красоты или же конкурс NOT красоты
  • Используйте * в качестве версификатора, напр. научн* охватит слова "научный", "научные" и т.д.

Данный сайт использует cookie-файлы

Продолжая использовать наш сайт, вы даете согласие на обработку файлов cookie, которые обеспечивают правильную работу сайта.

О куки-файлах