Pesquisa

Edição
Título
Autores
Volume 2016, Nº 10 (2016)
Changes in the fracture strength parameters of ferritic–bainitic and bainitic pipe steels during operation
Zikeev V., Filippov G., Shabalov I., Livanova O., Solov’ev D.
PDF
(Eng)
Volume 2017, Nº 4 (2017)
Forces and strains during drop weight tear test
Shtremel’ M., Arabei A., Glebov A., Abakumov A., Esiev T., Struin A., Sarychev B.
PDF
(Eng)
Volume 2017, Nº 12 (2017)
Fracture Resistance Factors of Iron-Based Hard Alloys
Kudrya A., Sokolovskaya E., Akhmedova T.
PDF
(Eng)
Volume 2019, Nº 4 (2019)
Determination of the Crack Tip Position by Digital Image Correlation during Static and Cyclic Fracture Toughness Tests of Aluminum Alloys
Avtaev V., Yakovlev N., Erasov V., Podzhivotov N.
PDF
(Eng)
Volume 2017, Nº 6 (2017)
Heterogeneous structure and fracture of iron-based alloys and their measurement
Kudrya A., Sokolovskaya E., Akhmedova T., Perezhogin V.
PDF
(Eng)
Volume 2019, Nº 12 (2019)
Predicting the Fracture of Large Forgings with a Heterogeneous Structure
Kudrya A., Sokolovskaya E., Ngo K., Kuz’ko E., Kotishevskii G.
PDF
(Eng)
Volume 2019, Nº 4 (2019)
Fatigue Strength of an AlSi10Mg Alloy Fabricated by Selective Laser Melting
Gerov M., Vladislavskaya E., Terent’ev V., Prosvirnin D., Antonova O., Kolmakov A.
PDF
(Eng)
Volume 2018, Nº 4 (2018)
Possibility to Strengthen the Joint between a Titanium Alloy and Stainless Steel Formed by Diffusion Welding through an Interlayer
Khazgaliev R., Imayev M., Mulyukov R.
PDF
(Eng)
Volume 2017, Nº 4 (2017)
Study of the fracture kinetics in structural aluminum alloys subjected to a long-term action of a static load and a corrosive medium using specimens of a new type
Kablov E., Grinevich A., Lutsenko A., Erasov V., Nuzhnyi G., Gulina I.
PDF
(Eng)
Volume 2019, Nº 10 (2019)
Causes and Mechanisms of Fracture of a Main Line Section Made of 17G1S Steel
Goritskii V., Shneiderov G., Durneva A.
PDF
(Eng)
Volume 2019, Nº 4 (2019)
Influence of the Crystallographic Texture of Aluminum Sheets on the Fracture Toughness of Metal–Polymer Composite Materials
Grechnikov F., Erisov Y., Petrov I.
PDF
(Eng)
Volume 2018, Nº 7 (2018)
Changes in the Physical Properties and the Damage of Low- and Medium-Carbon Steels during Tension
Tyutin M., Botvina L., Sinev I.
PDF
(Eng)
Volume 2016, Nº 10 (2016)
Mathematical simulation of pressing X-ray lenses from nanocrystalline beryllium
Mishin V., Shishov I., Glukhov P., Zabrodin A., Semenov A., Brylev D., Anikin A.
PDF
(Eng)
Volume 2019, Nº 10 (2019)
Structure and Mechanical Properties of the Layered Composites Made of Multicomponent Niobium Alloys and Hardening Silicon–Carbon Compounds Formed by Solid-Phase Sintering
Korzhov V., Kiiko V., Zheltyakova I.
PDF
(Eng)
Volume 2018, Nº 13 (2018)
Brittle Fracture of a Material upon Microcutting of the Workpiece Surface by the Microrelief Protrusions of Loose Abrasive Grains
Skryabin V., Zverovshchikov A., Zotov E.
PDF
(Eng)
Volume 2018, Nº 7 (2018)
Structure and Phase Formation in the Mo–Si–Al–Zr–N System during the Formation of Arc-PVD Coatings and Their Properties
Blinkov I., Chernogor A., Volkhonskii A., Levinskii Y., Sergevnin V., Belov D.
PDF
(Eng)
Volume 2017, Nº 4 (2017)
Estimation of the resistance to the initiation of fatigue cracks in the welded joints of steel constructions
Odesskii P., Shuvalov A., Emel’yanov O.
PDF
(Eng)
Volume 2016, Nº 10 (2016)
Fatigue strength of a Ti–6Al–4V alloy produced by selective laser melting
Gerov M., Vladislavskaya E., Terent’ev V., Prosvirnin D., Kolmakov A., Antonova O.
PDF
(Eng)
Volume 2019, Nº 10 (2019)
Estimation of the Local State of Stress and Strains in Stress Concentration Zones in a Wide Strain Range
Makhutov N., Reznikov D.
PDF
(Eng)
Volume 2018, Nº 10 (2018)
Numerical Simulation of the Loss of Stability of a Set of Cracks
Mel’nichenko A.
PDF
(Eng)
Volume 2017, Nº 4 (2017)
Ensemble of secondary cracks near the fatigue fracture surface of a titanium alloy VT23M specimen
Lavrov A., Erasov V., Nochovnaya N., Kotova E.
PDF
(Eng)
Volume 2019, Nº 7 (2019)
Effect of Temperature on the Low-Cycle Fatigue Characteristics of Single Crystals Made of an Ni3Al-Based Rhenium-Containing Intermetallic Alloy
Povarova K., Bazyleva O., Gorbovets M., Drozdov A., Bulakhtina M.
PDF
(Eng)
Volume 2018, Nº 10 (2018)
Interdisciplinary Problems of Fracture Physics and Mechanics: From Metals to Rocks. II. Fracture Criteria
Botvina L., Zavyalov A.
PDF
(Eng)
Volume 2017, Nº 10 (2017)
Analysis of the fracture kinetics and mechanisms of 20GL steel having different strengths using the acoustic emission parameters
Nikulin S., Khanzhin V., Nikitin A., Turilina V., Zabolotnikova V.
PDF
(Eng)
Volume 2017, Nº 4 (2017)
Effect of volume–surface quenching on the impact toughness of 20GL steel intended for cast freight bogie solebars
Nikulin S., Rozhnov A., Turilina V., Zabolotnikova V., Komissarov A., Nechaikina T.
PDF
(Eng)
1 - 25 de 35 resultados 1 2 > >> 
Dicas:
  • Palavras-chave são sensíveis a maiúsculas
  • Preposições e conjunções ingleses são ignoradas
  • Busca é feita por todos os palavras-chave (agente AND experimentador) por omissão
  • Use OR para pesquisar um termo exato, ex.: educação OR formação
  • Use parênteses para criar frases complexas, ex.: arquivo de ((revistas OR conferências) NOT teses)
  • Para pesquisar uma frase precisa use aspas duplas, ex.: "investigações científicas"
  • Exclua uma palavra utilizando o sinal - (hífen) ou operador NOT; ex.: concurso-de beleza ou concurso NOT de beleza
  • Use * como caractere-coringa, ex.: científic* recuperará as palavras "científico", "científicos", etc.

Este site utiliza cookies

Ao continuar usando nosso site, você concorda com o procedimento de cookies que mantêm o site funcionando normalmente.

Informação sobre cookies