Поиск

Выпуск
Название
Авторы
Том 2019, № 7 (2019)
Technological Schemes and Conditions for the Production of Rolling Rings from Hollow As-Cast Blanks
Kostyshev V., Erisov Y.
PDF
(Eng)
Том 2019, № 2 (2019)
Calorimetric Study of the Formation of Liquid Ag–Cu–Sn Alloys. Enthalpy of Mixing for the Boundary Binary Cu–Ag, Cu–Sn, and Ag–Sn Systems at 1150°C
Oleinik K., Bykov A.
PDF
(Eng)
Том 2019, № 8 (2019)
Thermal Analysis of the Fabrication of Magnesium Master Alloys Containing Yttrium and Zinc
Savchenkov S., Bazhin V., Brichkin V., Ugolkov V.
PDF
(Eng)
Том 2018, № 4 (2018)
Structure Formation and Hardening of the Hybrid Material Based on Vanadium and Zirconium Alloys during High-Pressure Torsion
Rogachev S., Nikulin S., Khatkevich V., Tabachkova N., Sundeev R.
PDF
(Eng)
Том 2019, № 13 (2019)
Microstructure and Mechanical Properties of Light Cellular Constructions Made of a VT6 Alloy by Selective Laser Melting
Sufiyarov V., Borisov E., Polozov I., Sokolova V., Popovich A.
PDF
(Eng)
Том 2019, № 10 (2019)
Structure and Mechanical Properties of the Layered Composites Made of Multicomponent Niobium Alloys and Hardening Silicon–Carbon Compounds Formed by Solid-Phase Sintering
Korzhov V., Kiiko V., Zheltyakova I.
PDF
(Eng)
Том 2019, № 2 (2019)
Activity of Lanthanum in Zn-Containing Alloys: La–Zn, La–U–Zn, and La–U–Ga–Zn Systems
Volkovich V., Mal’tsev D., Raguzina E., Dedyukhin A., Shchetinskii A., Yamshchikov L.
PDF
(Eng)
Том 2018, № 12 (2018)
Mechanisms of Alumina Formation from Metallic Raw Materials under Electrolysis Conditions
Lysenko A., Nalivaiko A.
PDF
(Eng)
Том 2018, № 10 (2018)
Change in the Structure and the Properties of Cylindrical Alloy AMg6 Shells in Loading by Glancing Detonation Waves
Brodova I., Smirnov E., Shirinkina I., Astaf’ev V., Yablonskikh T., Koval’ A., Degtyarev A., Shorokhov E.
PDF
(Eng)
Том 2018, № 4 (2018)
Estimation of the Delayed Hydride Cracking Resistance of the Pressure Tubes in Nuclear Reactors
Shmakov A., Singh R., Matvienko Y., Kolmakov A.
PDF
(Eng)
Том 2018, № 2 (2018)
Iron–Chromium Precursors for Hard-Magnetic Fe–Cr–Co Alloys
Vedmid L., Dorogina G.
PDF
(Eng)
Том 2017, № 12 (2017)
Elemental Composition of the Powder Particles Produced by Electric Discharge Dispersion of the Wastes of a VK8 Hard Alloy
Latypov R., Ageev E., Latypova G., Altukhov A., Ageeva E.
PDF
(Eng)
Том 2017, № 9 (2017)
Effect of the phase composition on the properties of a complex magnesium alloy at temperatures from –70 to +300°C
Volkova E., Duyunova V., Mostyaev I.
PDF
(Eng)
Том 2017, № 4 (2017)
Influence of heat treatment on the efficiency of impact fragmentation of amorphous alloy Fe73.5Cu1Nb3Si13.5B9 ribbons
Kuznetsov P., Samodelkin E., Klimov V., Kashirina A.
PDF
(Eng)
Том 2016, № 11 (2016)
Comparative analysis of the reactivity of nickel and a Ni–Re (10 wt %) alloy during direct current polarization in sulfuric acid solutions
Bryukvin V., Skryleva E., Levchuk O., Tsybin O., Bol’shikh A., Kuznetsova O.
PDF
(Eng)
Том 2019, № 13 (2019)
Mass Transfer of a Nanocrystalline 5BDSR Alloy during Low-Voltage Electrospark Treatment
Kuznetsov I., Kolomeichenko A.
PDF
(Eng)
Том 2019, № 10 (2019)
Amorphous-Alloy-Based Composites Prepared by High-Pressure Torsion
Permyakova I., Blinova E., Shchetinin I., Savchenko E.
PDF
(Eng)
Том 2019, № 2 (2019)
Structure of the Al90Y10 Alloy Formed upon Pressure Solidification
Menshikova S., Shirinkina I., Brodova I., Brazhkin V.
PDF
(Eng)
Том 2018, № 11 (2018)
Effect of the Cobalt Content and Chromium Alloying on the Structure of the Scale Formed on Structural β-NiAl + γ'-Ni3Al + γ-Ni Alloys (Ni–Al–Co System) at 1300°C
Drozdov A., Povarova K., Bazyleva O., Morozov A., Antonova A., Arginbaeva E., Bulakhtina M., Ashmarin A.
PDF
(Eng)
Том 2018, № 6 (2018)
Properties of the Coatings Fabricated by Plasma-Jet Hard-Facing by Dispersed Mechanical Engineering Wastes
Latypov R., Ageev E., Latypova G., Altukhov A., Ageeva E.
PDF
(Eng)
Том 2018, № 1 (2018)
Structure and Tribological Properties of B83 Babbit–Based Composite Rods and the Coatings Produced from Them by Arc Surfacing
Bolotova L., Kalashnikov I., Kobeleva L., Katin I., Kolmakov A., Mikheev R., Kobernik N., Podymova N.
PDF
(Eng)
Том 2017, № 12 (2017)
Experience of Application of EBW in Producing Welded VT41 Alloy Drums in the Design of an HPC in an Advanced Engine
Bykov Y., Fomichev E., Kashapov O., Kyaramyan K.
PDF
(Eng)
Том 2017, № 9 (2017)
Structural heat-resistant β-NiAl + γ′-Ni3Al alloys of the Ni–Al–Co system: II. Oxidation
Povarova K., Drozdov A., Bazyleva O., Morozov A., Antonova A., Arginbaeva E., Alad’ev N., Sirotinkin V.
PDF
(Eng)
Том 2017, № 4 (2017)
Effect of deformation and heat treatment on the structure, the mechanical properties, and the fracture characteristics of an ultrafine-grained Zr–1Nb alloy
Vinokurov V., Grabovetskaya G., Stepanova E., Mishin I.
PDF
(Eng)
Том 2016, № 10 (2016)
Fatigue strength of a Ti–6Al–4V alloy produced by selective laser melting
Gerov M., Vladislavskaya E., Terent’ev V., Prosvirnin D., Kolmakov A., Antonova O.
PDF
(Eng)
1 - 25 из 94 результатов 1 2 3 4 > >> 
Подсказки:
  • Ключевые слова чувствительны к регистру
  • Английские предлоги и союзы игнорируются
  • По умолчанию поиск проводится по всем ключевым словам (агенс AND экспериенцер)
  • Используйте OR для поиска того или иного термина, напр. образование OR обучение
  • Используйте скобки для создания сложных фраз, напр. архив ((журналов OR конференций) NOT диссертаций)
  • Для поиска точной фразы используйте кавычки, напр. "научные исследования"
  • Исключайте слово при помощи знака - (дефис) или оператора NOT; напр. конкурс -красоты или же конкурс NOT красоты
  • Используйте * в качестве версификатора, напр. научн* охватит слова "научный", "научные" и т.д.

Данный сайт использует cookie-файлы

Продолжая использовать наш сайт, вы даете согласие на обработку файлов cookie, которые обеспечивают правильную работу сайта.

О куки-файлах