Pesquisa

Edição
Título
Autores
Volume 2019, Nº 6 (2019)
Plasma Heating of Periclase–Carbon Refractory
Kats Y., Krasnyanskii M., Yusupov D., Tyuftyaev A., Gadzhiev M., Khromov M.
PDF
(Eng)
Volume 2018, Nº 3 (2018)
Effect of Pulsed Nitrogen Plasma and Nitrogen Ion Fluxes on the Structure and Mechanical Properties of Vanadium
Borovitskaya I., Nikulin V., Bondarenko G., Mikhailova A., Silin P., Gaidar A., Paramonova V., Peregudova E.
PDF
(Eng)
Volume 2017, Nº 11 (2017)
Structural Changes in the Vanadium Sample Surface Induced by Pulsed High-Temperature Deuterium Plasma and Deuterium Ion Fluxes
Borovitskaya I., Pimenov V., Gribkov V., Padukh M., Bondarenko G., Gaidar A., Paramonova V., Morozov E.
PDF
(Eng)
Volume 2017, Nº 9 (2017)
Distribution of deuterium and hydrogen in Zr and Ti foil assemblies under the action of a pulsed deuterium high-temperature plasma
Bondarenko G., Volobuev I., Eriskin A., Kobzev A., Nikulin V., Peregudova E., Silin P., Borovitskaya I.
PDF
(Eng)
Volume 2017, Nº 6 (2017)
Erosion of plasma generator electrodes for various power supplies
Cherednichenko M., Serikov V., Butakov E., Urbakh A.
PDF
(Eng)
Volume 2019, Nº 10 (2019)
Effect of the Thermomechanical Compacting Conditions on the Electrical Conductivity of an Al2O3/Graphene Composite Material
Zholnin A., Tenishev A., Stolyarov V.
PDF
(Eng)
Volume 2018, Nº 6 (2018)
Development of a Commercial Technology for Plasma Arc Remelting of a Nitrogen-Bearing 05Kh21AG15N8MF Steel
Sisev A., Tsimerman S., Kostina M., Il’inskii A., Perkas M., Rigina L.
PDF
(Eng)
Volume 2017, Nº 4 (2017)
Scanning probe microscopy estimation of the wear resistance of the surface of a modified PVC film
Kochetkova A., Gorbushin P., Sosnov E., Kolert K., Malygin A.
PDF
(Eng)
Volume 2017, Nº 4 (2017)
Effect of plasma immersion ion beam processing on the structure–phase state and the properties of the surface layers in titanium nickelide samples
Lotkov A., Kashin O., Borisov D., Ostapenko M., Neiman A., Krukovskii K., Gudimova E.
PDF
(Eng)
Volume 2019, Nº 4 (2019)
Application of Indentation for Estimating the Thermal Stability of Plasma Thermal Barrier Coatings
Il’inkova T., Barsukova E.
PDF
(Eng)
Volume 2018, Nº 9 (2018)
Effect of Pulsed Helium Ion Fluxes and Helium Plasma on the Inconel 718 Alloy
Borovitskaya I., Gribkov V., Grigorovich K., Demin A., Maslyaev S., Morozov E., Pimenov V., Sprygin G., Zepelev A., Gusakov M., Logachev I., Bondarenko G., Gaidar A.
PDF
(Eng)
Volume 2019, Nº 1 (2019)
Structure and Microporosity of Ion-Plasma Condensed Coatings Deposited from a Two-Phase Vacuum-Arc Discharge Plasma Flow Containing Evaporated Material Microdroplets
Muboyadzhyan S., Budinovskii S., Gorlov D., Doronin O.
PDF
(Eng)
Volume 2019, Nº 13 (2019)
Technological Methods for Increasing the Life of Machine Components
Kuznetsov Y., Kravchenko I., Sevryukov A., Glinskii M.
PDF
(Eng)
Volume 2018, Nº 13 (2018)
Formation of the Properties of the Working Surfaces of Important Parts by Plasma Surfacing and Surface Heat Treatment by a Reversed-Polarity Current
Shchitsyn V., Gaidar S., Shchitsyn Y., Kastell E.
PDF
(Eng)
Volume 2019, Nº 13 (2019)
Elemental Composition and Microhardness of the Coatings Prepared on Faced Aluminum Alloys by Plasma Electrolytic Oxidation in a Silicate–Alkaline Electrolyte
Kolomeichenko A., Kravchenko I.
PDF
(Eng)
Volume 2018, Nº 13 (2018)
Machining of the Ceramic Oxide Coating Formed by Plasma Electrolytic Oxidation
Kuznetsov Y., Kravchenko I., Goncharenko V., Glinskii M.
PDF
(Eng)
Volume 2017, Nº 7 (2017)
Fabrication of high-alloy powders consisting of spherical particles from ultradispersed components
Samokhin A., Fadeev A., Sinayskiy M., Alekseev N., Tsvetkov Y., Arzhatkina O.
PDF
(Eng)
Volume 2019, Nº 11 (2019)
Influence of Sulfur on the Plasma Decarburization and Desulfurization of Corrosion-Resistant Steels
Grigorovich K., Komolova O., Rumyantsev B.
PDF
(Eng)
Volume 2018, Nº 13 (2018)
Experimental Evaluation of the Methods of Laser Cementation of Low-Alloy Tool Steels
Marinin E., Chirkov A., Gavrilov G., Fetisov G., Chernyshov D., Kurganova Y.
PDF
(Eng)
Volume 2019, Nº 10 (2019)
Fabrication of a High-Density Compacted Material from a Coarse-Grained Silicon Carbide Powder by Magnetic Pulsed Pressing Combined with Spark Plasma Sintering
Shornikov D., Tenishev A., Kazakova V., Zholnin A.
PDF
(Eng)
Volume 2018, Nº 12 (2018)
Measurement of the Anode Spot Temperature of a Plasma Arc Discharge
Simonyan L., Kats Y.
PDF
(Eng)
Volume 2017, Nº 5 (2017)
Manufacture of NiAl-based rods for plasma centrifugal spraying using mechanochemical synthesis
Logacheva A., Gusakov M., Sentyurina Z., Logachev I., Kandyba A.
PDF
(Eng)
1 - 22 de 22 resultados
Dicas:
  • Palavras-chave são sensíveis a maiúsculas
  • Preposições e conjunções ingleses são ignoradas
  • Busca é feita por todos os palavras-chave (agente AND experimentador) por omissão
  • Use OR para pesquisar um termo exato, ex.: educação OR formação
  • Use parênteses para criar frases complexas, ex.: arquivo de ((revistas OR conferências) NOT teses)
  • Para pesquisar uma frase precisa use aspas duplas, ex.: "investigações científicas"
  • Exclua uma palavra utilizando o sinal - (hífen) ou operador NOT; ex.: concurso-de beleza ou concurso NOT de beleza
  • Use * como caractere-coringa, ex.: científic* recuperará as palavras "científico", "científicos", etc.

Este site utiliza cookies

Ao continuar usando nosso site, você concorda com o procedimento de cookies que mantêm o site funcionando normalmente.

Informação sobre cookies