| Issue |
Title |
File |
| Vol 2019, No 10 (2019) |
On the Use of Atomic Force Microscopy in Metallography |
(Eng)
|
|
Shlyakhova G.V., Barannikova S.A., Zuev L.B.
|
| Vol 2019, No 10 (2019) |
Effect of Severe Plastic Deformation on the Acoustic Emission and the Thermal Effects in Titanium Nickelide |
(Eng)
|
|
Belousov N.N., Andreev V.A., Chernyaeva E.V., Volkov A.E., V’yunenko Y.N.
|
| Vol 2019, No 10 (2019) |
Effect of the Fractionality and Direction of Severe Plastic Deformation on the Structure and Properties of Commercial-Purity Titanium |
(Eng)
|
|
Shurygina N.A., Glezer A.M., D’yakonov D.L., Medvedeva A.D., Tomchuk A.A., Rassadina T.V.
|
| Vol 2019, No 10 (2019) |
Change in the Mechanical Properties of Commercial-Purity Copper during Alternating Elastoplastic Deformation |
(Eng)
|
|
Matyunin V.M., Marchenkov A.Y., Shelest A.E., Yusupov V.S., Perkas M.M.
|
| Vol 2019, No 4 (2019) |
Effect of a Structure and Test Conditions on the Critical Strains and Stresses in Titanium Nickelide-Based Alloys |
(Eng)
|
|
Gusev D.E., Kollerov M.Y., Vinogradov R.E.
|
| Vol 2019, No 4 (2019) |
Effect of Cold Rolling and Subsequent Annealing on the Microstructure and the Microtexture of Austenitic Corrosion-Resistant Steels |
(Eng)
|
|
Odnobokova M.V., Belyakov A.N.
|
| Vol 2019, No 4 (2019) |
Effect of Megaplastic Deformation in a Bridgman Chamber at Various Temperatures on the Corrosion Resistance of VT1-0 Titanium |
(Eng)
|
|
Cheretaeva A.O., Shurygina N.A., Glezer A.M., Rakoch A.G., Tomchuk A.A., Medvedeva A.D.
|
| Vol 2018, No 10 (2018) |
Effect of High-Pressure Torsion on the Lattice Parameters of α-Fe and α-Fe-Based Solid Solutions |
(Eng)
|
|
Zhukov O.P., Filippova V.P., Tomchuk A.A., Neumoin K.V., Basov S.V., Glezer A.M., Perlovich Y.A., Krymskaya O.A., Muradimova L.F.
|
| Vol 2018, No 10 (2018) |
Effect of the Deformation Axis Orientation on the Strength of Dislocation Junctions in FCC Single Crystals |
(Eng)
|
|
Kurinnaya R.I., Zgolich M.V., Starenchenko V.A., Matveev M.V., Zgolich I.A., Shalygina T.A., Sadritdinova G.D.
|
| Vol 2018, No 10 (2018) |
Change in the Structure and the Properties of Cylindrical Alloy AMg6 Shells in Loading by Glancing Detonation Waves |
(Eng)
|
|
Brodova I.G., Smirnov E.B., Shirinkina I.G., Astaf’ev V.V., Yablonskikh T.I., Koval’ A.V., Degtyarev A.A., Shorokhov E.V.
|
| Vol 2018, No 10 (2018) |
Microstructural Analysis of the Ni3Ge Intermetallic Compound after High Pressure Torsion |
(Eng)
|
|
Greenberg B.A., Ivanov M.A., Pilyugin V.P., Pushkin M.S., Plotnikov A.V., Tolmachev T.P., Patselov A.M., Tankeyev A.P.
|
| Vol 2018, No 10 (2018) |
Microstructural Evolution in Ceramics and Glasses during High Pressure Torsion |
(Eng)
|
|
Greenberg B.A., Ivanov M.A., Pilyugin V.P., Pushkin M.S., Plotnikov A.V., Tolmachev T.P., Patselov A.M., Tankeyev A.P.
|
| Vol 2018, No 4 (2018) |
Structure Formation and Hardening of the Hybrid Material Based on Vanadium and Zirconium Alloys during High-Pressure Torsion |
(Eng)
|
|
Rogachev S.O., Nikulin S.A., Khatkevich V.M., Tabachkova N.Y., Sundeev R.V.
|
| Vol 2018, No 4 (2018) |
Friction Surfaces and Wear Products of Sn–Sb–Cu-Based Composite Materials |
(Eng)
|
|
Kalashnikov I.E., Kobeleva L.I., Bolotova L.K., Bykov P.A., Kolmakov A.G.
|
| Vol 2018, No 4 (2018) |
Structure and Plastic Flow Heterogeneities of the 12Kh18N9T Steel–St3 Steel Bimetal during Tension |
(Eng)
|
|
Barannikova S.A., Li Y.V., Lunev A.G., Shlyakhova G.V., Zuev L.B.
|
| Vol 2017, No 10 (2017) |
Methodological aspects of the quantitative texture analysis of HCP Alloy (Ti, Zr) sheet semiproducts |
(Eng)
|
|
Dzunovich D.A., Betsofen S.Y., Panin P.V.
|
| Vol 2017, No 10 (2017) |
Role of crushing-induced fragmentation in the consolidation of quartz ceramic and glass powders during high-pressure torsion |
(Eng)
|
|
Greenberg B.A., Ivanov M.A., Pilyugin V.P., Patselov A.M., Tolmachev T.P.
|
| Vol 2017, No 10 (2017) |
Phase composition, texture, and anisotropy of the properties of Al–Cu–Li–Mg alloy sheets |
(Eng)
|
|
Betsofen S.Y., Antipov V.V., Serebrennikova N.Y., Dolgova M.I., Kabanova Y.A.
|
| Vol 2017, No 10 (2017) |
Anisotropy of the effective elastic modulus of a steel plate with a lattice of circular holes |
(Eng)
|
|
Gol’dshtein R.V., Mokryakov V.V., Chentsov A.V., Petrovskii V.N., Andreev A.O., Glezer A.M., Libman M.A.
|
| Vol 2017, No 10 (2017) |
Shear bands and anisotropy of the mechanical properties of an MA2-1pch magnesium alloy after equal-channel angular pressing |
(Eng)
|
|
Serebryany V.N., Khar’kova M.A., D’yakonov G.S., Kopylov V.I., Dobatkin S.V.
|
| Vol 2017, No 10 (2017) |
Effect of high-rate deformation on the structure, the properties, and the thermal stability of copper alloyed with chromium and zirconium |
(Eng)
|
|
Khomskaya I.V., Zel’dovich V.I., Shorokhov E.V., Frolova N.Y., Kheifets A.E., Dyakina V.P.
|
| Vol 2017, No 10 (2017) |
Effect of chromium on the structure evolution in single-phase Ni–Cr alloys during high-pressure torsion |
(Eng)
|
|
Krasnoperova Y.G., Degtyarev M.V., Chashchukhina T.I., Voronova L.M.
|
| Vol 2016, No 10 (2016) |
Calculation-experimental technique for predicting the relaxation properties of thin polymer fibers during long-term loading |
(Eng)
|
|
Goldstein R.V., Popov A.L., Chentsov A.V.
|
| Vol 2016, No 10 (2016) |
Simulation and prediction of the development of dynamic recrystallization during the deformation of low-alloy low-carbon steel blanks |
(Eng)
|
|
Rudskoi A.I., Kodzhaspirov G.E., Kamelin E.I.
|
| Vol 2016, No 10 (2016) |
Effect of the deformation temperature on the structural refinement of BCC metals with a high stacking fault energy during high pressure torsion |
(Eng)
|
|
Voronova L.M., Chashchukhina T.I., Gapontseva T.M., Krasnoperova Y.G., Degtyarev M.V., Pilyugin V.P.
|
| 1 - 25 of 31 Items |
1 2 > >>
|
