Email this article Structure and Plastic Flow Heterogeneities of the 12Kh18N9T Steel–St3 Steel Bimetal during Tension
- Authors: Barannikova S.A.1,2,3, Li Y.V.1, Lunev A.G.1, Shlyakhova G.V.1,4, Zuev L.B.1,2
-
Affiliations:
- Institute of Strength Physics and Materials Science, Siberian Branch
- Tomsk National Research State University
- Tomsk State University of Architecture and Building
- Seversk Institute of Technology
- Issue: Vol 2018, No 4 (2018)
- Pages: 383-388
- Section: Structure and Properties of the Deformed State
- URL: https://journals.rcsi.science/0036-0295/article/view/172491
- DOI: https://doi.org/10.1134/S003602951804002X
- ID: 172491
Cite item
Open Access
Access granted
Subscription Access
Abstract
The plastic deformation of a three-layer bimetallic composite, namely, structural low-carbon St3sp steel clad by an austenitic corrosion-resistant 12Kh18N9T steel on both sides is studied. The laws of Chernov–Lüders band propagation during uniaxial tension and the load that corresponds to the yield strength are considered.
About the authors
S. A. Barannikova
Institute of Strength Physics and Materials Science, Siberian Branch; Tomsk National Research State University; Tomsk State University of Architecture and Building
Author for correspondence.
Email: bsa@ispms.tsc.ru
Russian Federation, Tomsk, 634055; Tomsk, 634050; Tomsk, 634003
Yu. V. Li
Institute of Strength Physics and Materials Science, Siberian Branch
Email: bsa@ispms.tsc.ru
Russian Federation, Tomsk, 634055
A. G. Lunev
Institute of Strength Physics and Materials Science, Siberian Branch
Email: bsa@ispms.tsc.ru
Russian Federation, Tomsk, 634055
G. V. Shlyakhova
Institute of Strength Physics and Materials Science, Siberian Branch; Seversk Institute of Technology
Email: bsa@ispms.tsc.ru
Russian Federation, Tomsk, 634055; Seversk, 636036
L. B. Zuev
Institute of Strength Physics and Materials Science, Siberian Branch; Tomsk National Research State University
Email: bsa@ispms.tsc.ru
Russian Federation, Tomsk, 634055; Tomsk, 634050
