| Выпуск |
Название |
Файл |
| Том 2019, № 10 (2019) |
Change in the Mechanical Properties of Commercial-Purity Copper during Alternating Elastoplastic Deformation |
(Eng)
|
|
Matyunin V., Marchenkov A., Shelest A., Yusupov V., Perkas M.
|
| Том 2019, № 10 (2019) |
On the Use of Atomic Force Microscopy in Metallography |
(Eng)
|
|
Shlyakhova G., Barannikova S., Zuev L.
|
| Том 2019, № 10 (2019) |
Effect of Severe Plastic Deformation on the Acoustic Emission and the Thermal Effects in Titanium Nickelide |
(Eng)
|
|
Belousov N., Andreev V., Chernyaeva E., Volkov A., V’yunenko Y.
|
| Том 2019, № 10 (2019) |
Effect of the Fractionality and Direction of Severe Plastic Deformation on the Structure and Properties of Commercial-Purity Titanium |
(Eng)
|
|
Shurygina N., Glezer A., D’yakonov D., Medvedeva A., Tomchuk A., Rassadina T.
|
| Том 2019, № 4 (2019) |
Effect of a Structure and Test Conditions on the Critical Strains and Stresses in Titanium Nickelide-Based Alloys |
(Eng)
|
|
Gusev D., Kollerov M., Vinogradov R.
|
| Том 2019, № 4 (2019) |
Effect of Cold Rolling and Subsequent Annealing on the Microstructure and the Microtexture of Austenitic Corrosion-Resistant Steels |
(Eng)
|
|
Odnobokova M., Belyakov A.
|
| Том 2019, № 4 (2019) |
Effect of Megaplastic Deformation in a Bridgman Chamber at Various Temperatures on the Corrosion Resistance of VT1-0 Titanium |
(Eng)
|
|
Cheretaeva A., Shurygina N., Glezer A., Rakoch A., Tomchuk A., Medvedeva A.
|
| Том 2018, № 10 (2018) |
Change in the Structure and the Properties of Cylindrical Alloy AMg6 Shells in Loading by Glancing Detonation Waves |
(Eng)
|
|
Brodova I., Smirnov E., Shirinkina I., Astaf’ev V., Yablonskikh T., Koval’ A., Degtyarev A., Shorokhov E.
|
| Том 2018, № 10 (2018) |
Microstructural Analysis of the Ni3Ge Intermetallic Compound after High Pressure Torsion |
(Eng)
|
|
Greenberg B., Ivanov M., Pilyugin V., Pushkin M., Plotnikov A., Tolmachev T., Patselov A., Tankeyev A.
|
| Том 2018, № 10 (2018) |
Microstructural Evolution in Ceramics and Glasses during High Pressure Torsion |
(Eng)
|
|
Greenberg B., Ivanov M., Pilyugin V., Pushkin M., Plotnikov A., Tolmachev T., Patselov A., Tankeyev A.
|
| Том 2018, № 10 (2018) |
Effect of High-Pressure Torsion on the Lattice Parameters of α-Fe and α-Fe-Based Solid Solutions |
(Eng)
|
|
Zhukov O., Filippova V., Tomchuk A., Neumoin K., Basov S., Glezer A., Perlovich Y., Krymskaya O., Muradimova L.
|
| Том 2018, № 10 (2018) |
Effect of the Deformation Axis Orientation on the Strength of Dislocation Junctions in FCC Single Crystals |
(Eng)
|
|
Kurinnaya R., Zgolich M., Starenchenko V., Matveev M., Zgolich I., Shalygina T., Sadritdinova G.
|
| Том 2018, № 4 (2018) |
Structure Formation and Hardening of the Hybrid Material Based on Vanadium and Zirconium Alloys during High-Pressure Torsion |
(Eng)
|
|
Rogachev S., Nikulin S., Khatkevich V., Tabachkova N., Sundeev R.
|
| Том 2018, № 4 (2018) |
Friction Surfaces and Wear Products of Sn–Sb–Cu-Based Composite Materials |
(Eng)
|
|
Kalashnikov I., Kobeleva L., Bolotova L., Bykov P., Kolmakov A.
|
| Том 2018, № 4 (2018) |
Structure and Plastic Flow Heterogeneities of the 12Kh18N9T Steel–St3 Steel Bimetal during Tension |
(Eng)
|
|
Barannikova S., Li Y., Lunev A., Shlyakhova G., Zuev L.
|
| Том 2017, № 10 (2017) |
Effect of high-rate deformation on the structure, the properties, and the thermal stability of copper alloyed with chromium and zirconium |
(Eng)
|
|
Khomskaya I., Zel’dovich V., Shorokhov E., Frolova N., Kheifets A., Dyakina V.
|
| Том 2017, № 10 (2017) |
Effect of chromium on the structure evolution in single-phase Ni–Cr alloys during high-pressure torsion |
(Eng)
|
|
Krasnoperova Y., Degtyarev M., Chashchukhina T., Voronova L.
|
| Том 2017, № 10 (2017) |
Methodological aspects of the quantitative texture analysis of HCP Alloy (Ti, Zr) sheet semiproducts |
(Eng)
|
|
Dzunovich D., Betsofen S., Panin P.
|
| Том 2017, № 10 (2017) |
Role of crushing-induced fragmentation in the consolidation of quartz ceramic and glass powders during high-pressure torsion |
(Eng)
|
|
Greenberg B., Ivanov M., Pilyugin V., Patselov A., Tolmachev T.
|
| Том 2017, № 10 (2017) |
Phase composition, texture, and anisotropy of the properties of Al–Cu–Li–Mg alloy sheets |
(Eng)
|
|
Betsofen S., Antipov V., Serebrennikova N., Dolgova M., Kabanova Y.
|
| Том 2017, № 10 (2017) |
Anisotropy of the effective elastic modulus of a steel plate with a lattice of circular holes |
(Eng)
|
|
Gol’dshtein R., Mokryakov V., Chentsov A., Petrovskii V., Andreev A., Glezer A., Libman M.
|
| Том 2017, № 10 (2017) |
Shear bands and anisotropy of the mechanical properties of an MA2-1pch magnesium alloy after equal-channel angular pressing |
(Eng)
|
|
Serebryany V., Khar’kova M., D’yakonov G., Kopylov V., Dobatkin S.
|
| Том 2016, № 10 (2016) |
Calculation-experimental technique for predicting the relaxation properties of thin polymer fibers during long-term loading |
(Eng)
|
|
Goldstein R., Popov A., Chentsov A.
|
| Том 2016, № 10 (2016) |
Simulation and prediction of the development of dynamic recrystallization during the deformation of low-alloy low-carbon steel blanks |
(Eng)
|
|
Rudskoi A., Kodzhaspirov G., Kamelin E.
|
| Том 2016, № 10 (2016) |
Effect of the deformation temperature on the structural refinement of BCC metals with a high stacking fault energy during high pressure torsion |
(Eng)
|
|
Voronova L., Chashchukhina T., Gapontseva T., Krasnoperova Y., Degtyarev M., Pilyugin V.
|
| 1 - 25 из 31 результатов |
1 2 > >>
|
