| Issue |
Title |
File |
| Vol 2018, No 4 (2018) |
Estimation of the Delayed Hydride Cracking Resistance of the Pressure Tubes in Nuclear Reactors |
(Eng)
|
|
Shmakov A.A., Singh R.N., Matvienko Y.G., Kolmakov A.G.
|
| Vol 2017, No 10 (2017) |
Estimation of the notch sensitivity of a nitrided steel by acoustic emission |
(Eng)
|
|
Rogachev S.O., Nikulin S.A., Khatkevich V.M., Ozherelkov D.Y., Molyarov A.V.
|
| Vol 2017, No 10 (2017) |
Influence of the tempering temperature on the mechanical properties and the phase composition of thin sheet TRIP steel |
(Eng)
|
|
Terent’ev V.F., Eliseev E.A., Matyunin V.M., Slizov A.K., Marchenkov A.Y., Sirotinkin V.P., Baikin A.S., Seval’nev G.S.
|
| Vol 2017, No 10 (2017) |
Evolution of the structure and the phase composition of a bainitic structural steel during plastic deformation |
(Eng)
|
|
Nikitina E.N., Glezer A.M., Ivanov Y.F., Aksenova K.V., Gromov V.E., Kazimirov S.A.
|
| Vol 2017, No 10 (2017) |
Fracture toughness of as-cast freight bogie solebars after volume–surface quenching |
(Eng)
|
|
Belov V.A., Nikitin A.V., Anikeenko V.I., Armizonov A.A., Rogachev S.O.
|
| Vol 2017, No 10 (2017) |
Fracture mechanism of coronal teenage dentin |
(Eng)
|
|
Panfilov P.E., Kabanova A.V., Borodin I.N., Guo J., Zang Z.
|
| Vol 2017, No 10 (2017) |
Adhesion energy in the metal/oxide system for the case of high-temperature oxidation of nickel-based superalloys |
(Eng)
|
|
Moskvichev V.V., Sukhodoeva N.V., Fedorova E.N., Popov A.S.
|
| Vol 2017, No 10 (2017) |
Mechanical and functional properties of commercial alloy TN-1 semiproducts fabricated by warm rotary forging and ECAP |
(Eng)
|
|
Andreev V.A., Yusupov V.S., Perkas M.M., Prosvirnin V.V., Shelest A.E., Prokoshkin S.D., Khmelevskaya I.Y., Korotitskii A.V., Bondareva S.A., Karelin R.D.
|
| Vol 2017, No 4 (2017) |
Nanoscale localization of plastic deformation in steel with a bainitic structure |
(Eng)
|
|
Ivanov Y.F., Gromov V.E., Glezer A.M., Nikitina E.N., Aksenova K.V.
|
| Vol 2017, No 4 (2017) |
Properties of the welded joints of manganese steel made by low-frequency pulsed arc welding |
(Eng)
|
|
Saraev Y.N., Bezborodov V.P., Gladovskii S.V., Golikov N.I.
|
| Vol 2017, No 4 (2017) |
Influence of heat treatment on the efficiency of impact fragmentation of amorphous alloy Fe73.5Cu1Nb3Si13.5B9 ribbons |
(Eng)
|
|
Kuznetsov P.A., Samodelkin E.A., Klimov V.N., Kashirina A.A.
|
| Vol 2017, No 4 (2017) |
Effect of volume–surface quenching on the impact toughness of 20GL steel intended for cast freight bogie solebars |
(Eng)
|
|
Nikulin S.A., Rozhnov A.B., Turilina V.Y., Zabolotnikova V.I., Komissarov A.A., Nechaikina T.A.
|
| Vol 2017, No 4 (2017) |
Microhardness of anodic aluminum oxide formed in an alkaline electrolyte |
(Eng)
|
|
Kanygina O.N., Filyak M.M.
|
| Vol 2017, No 4 (2017) |
Acoustic emission analysis of the stages of deformation of TRIP steel |
(Eng)
|
|
Penkin A.G., Terent’ev V.F., Roshchupkin V.V., Slizov A.K., Sirotinkin V.P.
|
| Vol 2016, No 10 (2016) |
Changes in the fracture strength parameters of ferritic–bainitic and bainitic pipe steels during operation |
(Eng)
|
|
Zikeev V.N., Filippov G.A., Shabalov I.P., Livanova O.V., Solov’ev D.M.
|
| Vol 2016, No 10 (2016) |
Effect of corrosive media on the cracking resistance of pipe steel under load |
(Eng)
|
|
Musaev S.D., Betsofen S.Y.
|
| Vol 2016, No 10 (2016) |
Strength of freight bogie solebar fragments after volume–surface quenching |
(Eng)
|
|
Nikulin S.A., Oguenko V.N., Rozhnov A.B., Turilina V.Y., Nechaikina T.A., Rogachev S.O.
|
| Vol 2016, No 10 (2016) |
Mathematical simulation of pressing X-ray lenses from nanocrystalline beryllium |
(Eng)
|
|
Mishin V.V., Shishov I.A., Glukhov P.A., Zabrodin A.V., Semenov A.A., Brylev D.A., Anikin A.S.
|
| Vol 2016, No 10 (2016) |
Correlation between the granular structure and the mechanical properties of high-nitrogen austenitic 02Kh20AG10N4MFB steel after annealing |
(Eng)
|
|
Bannykh I.O.
|
| Vol 2016, No 4 (2016) |
Effect of hot rolling on the structure and the mechanical properties of nitrogen-bearing austenitic–martensitic 14Kh15AN4M steel |
(Eng)
|
|
Bannykh O.A., Betsofen S.Y., Lukin E.I., Blinov V.M., Voznesenskaya N.M., Tonysheva O.A., Blinov E.V.
|
| Vol 2016, No 4 (2016) |
Wear resistance of the oxide layers formed on AK9pch silumin by microarc oxidation in an electrolyte modified by silicon dioxide nanoparticles |
(Eng)
|
|
Polunin A.V., Ivashin P.V., Rastegaev I.A., Borgardt E.D., Krishtal M.M.
|
| Vol 2016, No 4 (2016) |
Effect of the rolling temperature on the structure and the mechanical properties of high-nitrogen austenitic steels 05Kh21G9N7AMF and 04Kh22G12N4AMF |
(Eng)
|
|
Blinov V.M., Voznesenskaya N.M., Bannykh I.O., Tonasheva O.A., Blinov E.V., Zvereva T.N.
|
| Vol 2016, No 4 (2016) |
Fatigue strength of low-activation ferritic–martensitic high-chromium EK-181 steel |
(Eng)
|
|
Kolmakov A.G., Terent’ev V.F., Prosvirnin D.V., Chernov V.M., Leont’eva-Smirnova M.V.
|
| 26 - 48 of 48 Items |
<< < 1 2
|
