| Шығарылым |
Атауы |
Файл |
| Том 2018, № 4 (2018) |
Estimation of the Delayed Hydride Cracking Resistance of the Pressure Tubes in Nuclear Reactors |
(Eng)
|
|
Shmakov A., Singh R., Matvienko Y., Kolmakov A.
|
| Том 2017, № 10 (2017) |
Estimation of the notch sensitivity of a nitrided steel by acoustic emission |
(Eng)
|
|
Rogachev S., Nikulin S., Khatkevich V., Ozherelkov D., Molyarov A.
|
| Том 2017, № 10 (2017) |
Influence of the tempering temperature on the mechanical properties and the phase composition of thin sheet TRIP steel |
(Eng)
|
|
Terent’ev V., Eliseev E., Matyunin V., Slizov A., Marchenkov A., Sirotinkin V., Baikin A., Seval’nev G.
|
| Том 2017, № 10 (2017) |
Evolution of the structure and the phase composition of a bainitic structural steel during plastic deformation |
(Eng)
|
|
Nikitina E., Glezer A., Ivanov Y., Aksenova K., Gromov V., Kazimirov S.
|
| Том 2017, № 10 (2017) |
Fracture toughness of as-cast freight bogie solebars after volume–surface quenching |
(Eng)
|
|
Belov V., Nikitin A., Anikeenko V., Armizonov A., Rogachev S.
|
| Том 2017, № 10 (2017) |
Fracture mechanism of coronal teenage dentin |
(Eng)
|
|
Panfilov P., Kabanova A., Borodin I., Guo J., Zang Z.
|
| Том 2017, № 10 (2017) |
Adhesion energy in the metal/oxide system for the case of high-temperature oxidation of nickel-based superalloys |
(Eng)
|
|
Moskvichev V., Sukhodoeva N., Fedorova E., Popov A.
|
| Том 2017, № 10 (2017) |
Mechanical and functional properties of commercial alloy TN-1 semiproducts fabricated by warm rotary forging and ECAP |
(Eng)
|
|
Andreev V., Yusupov V., Perkas M., Prosvirnin V., Shelest A., Prokoshkin S., Khmelevskaya I., Korotitskii A., Bondareva S., Karelin R.
|
| Том 2017, № 4 (2017) |
Nanoscale localization of plastic deformation in steel with a bainitic structure |
(Eng)
|
|
Ivanov Y., Gromov V., Glezer A., Nikitina E., Aksenova K.
|
| Том 2017, № 4 (2017) |
Properties of the welded joints of manganese steel made by low-frequency pulsed arc welding |
(Eng)
|
|
Saraev Y., Bezborodov V., Gladovskii S., Golikov N.
|
| Том 2017, № 4 (2017) |
Influence of heat treatment on the efficiency of impact fragmentation of amorphous alloy Fe73.5Cu1Nb3Si13.5B9 ribbons |
(Eng)
|
|
Kuznetsov P., Samodelkin E., Klimov V., Kashirina A.
|
| Том 2017, № 4 (2017) |
Effect of volume–surface quenching on the impact toughness of 20GL steel intended for cast freight bogie solebars |
(Eng)
|
|
Nikulin S., Rozhnov A., Turilina V., Zabolotnikova V., Komissarov A., Nechaikina T.
|
| Том 2017, № 4 (2017) |
Microhardness of anodic aluminum oxide formed in an alkaline electrolyte |
(Eng)
|
|
Kanygina O., Filyak M.
|
| Том 2017, № 4 (2017) |
Acoustic emission analysis of the stages of deformation of TRIP steel |
(Eng)
|
|
Penkin A., Terent’ev V., Roshchupkin V., Slizov A., Sirotinkin V.
|
| Том 2016, № 10 (2016) |
Strength of freight bogie solebar fragments after volume–surface quenching |
(Eng)
|
|
Nikulin S., Oguenko V., Rozhnov A., Turilina V., Nechaikina T., Rogachev S.
|
| Том 2016, № 10 (2016) |
Mathematical simulation of pressing X-ray lenses from nanocrystalline beryllium |
(Eng)
|
|
Mishin V., Shishov I., Glukhov P., Zabrodin A., Semenov A., Brylev D., Anikin A.
|
| Том 2016, № 10 (2016) |
Correlation between the granular structure and the mechanical properties of high-nitrogen austenitic 02Kh20AG10N4MFB steel after annealing |
(Eng)
|
|
Bannykh I.
|
| Том 2016, № 10 (2016) |
Changes in the fracture strength parameters of ferritic–bainitic and bainitic pipe steels during operation |
(Eng)
|
|
Zikeev V., Filippov G., Shabalov I., Livanova O., Solov’ev D.
|
| Том 2016, № 10 (2016) |
Effect of corrosive media on the cracking resistance of pipe steel under load |
(Eng)
|
|
Musaev S., Betsofen S.
|
| Том 2016, № 4 (2016) |
Effect of hot rolling on the structure and the mechanical properties of nitrogen-bearing austenitic–martensitic 14Kh15AN4M steel |
(Eng)
|
|
Bannykh O., Betsofen S., Lukin E., Blinov V., Voznesenskaya N., Tonysheva O., Blinov E.
|
| Том 2016, № 4 (2016) |
Wear resistance of the oxide layers formed on AK9pch silumin by microarc oxidation in an electrolyte modified by silicon dioxide nanoparticles |
(Eng)
|
|
Polunin A., Ivashin P., Rastegaev I., Borgardt E., Krishtal M.
|
| Том 2016, № 4 (2016) |
Effect of the rolling temperature on the structure and the mechanical properties of high-nitrogen austenitic steels 05Kh21G9N7AMF and 04Kh22G12N4AMF |
(Eng)
|
|
Blinov V., Voznesenskaya N., Bannykh I., Tonasheva O., Blinov E., Zvereva T.
|
| Том 2016, № 4 (2016) |
Fatigue strength of low-activation ferritic–martensitic high-chromium EK-181 steel |
(Eng)
|
|
Kolmakov A., Terent’ev V., Prosvirnin D., Chernov V., Leont’eva-Smirnova M.
|
| Нәтижелер 48 - 26/48 |
<< < 1 2
|
