Поиск

Выпуск
Название
Авторы
Том 9, № 6 (2018)
Structure Formation of the Nitrogen-Containing Austenitic 04Kh20N6G11M2AFB Steel at Hot Deformation: Part I. Influence of Deformation Temperature and Strain Rate on the Process of Dynamic Recrystallization
Fomina O., Vikhareva T., Sagaradze V., Kataeva N.
PDF
(Eng)
Том 10, № 4 (2019)
Low-Cycle Fatigue of VZh175 Superalloy at Symmetric and Asymmetric Deformation
Gorbovets M., Khodinev I., Belyaev M., Letnikov M.
PDF
(Eng)
Том 9, № 6 (2018)
Structure and Properties of the Heat-Affected Zone of Low-Alloy Cold-Resistant Steel for Arctic Application
Sych O., Khlusova E., Pazilova U., Yashina E.
PDF
(Eng)
Том 9, № 6 (2018)
Structure Formation of the Nitrogen-Containing Austenitic 04Kh20N6G11M2AFB Steel at Hot Deformation: Part II. Influence of the Phase Composition and Conditions of Hot Deformation on the Process of Dynamic Recrystallization
Fomina O., Vikhareva T.
PDF
(Eng)
Том 10, № 1 (2019)
Structural Features of Cu–Ag Alloys Obtained via Mechanical Alloying with the Use of Cold and Cryogenic Severe Plastic Deformation
Tolmachev T., Pilyugin V., Antonova O., Ancharov A., Patselov A., Chernyshev E., Yaroslavtsev A.
PDF
(Eng)
Том 9, № 1 (2018)
Low-Cycle Fatigue under Controlled Deformation and Fracture of the Superalloy VZh175
Belyayev M., Terentyev V., Gorbovets M., Bakradze M., Antonova O.
PDF
(Eng)
Том 7, № 2 (2016)
Effect of electron irradiation on the formation and healing of defects in carbon nanotubes
Anikeyev V., Kovalchuk B., Lazorenko V., Mikhaylova G., Nishchenko M., Pimenov V., Prikhodko G., Sadykhov S., Tovtin V.
PDF
(Eng)
Том 10, № 1 (2019)
Interconnection of Structural Characteristics with Dynamic Properties of A5083 Aluminum Alloy
Brodova I., Petrova A., Razorenov S., Shorokhov E.
PDF
(Eng)
Том 9, № 6 (2018)
Concentration Redistribution of Alloying Elements in Pseudo-Alpha-Titanium Alloy under Elastoplastic Deformation
Ivanova L., Benemanskaya G., Travin V.
PDF
(Eng)
Том 8, № 4 (2017)
On Obtaining sharp cubic texture in thin tapes made of binary alloys of copper with yttrium and titanium
Khlebnikova Y., Rodionov D., Gervas’eva I., Egorova L., Suaridze T.
PDF
(Eng)
Том 7, № 2 (2016)
Comparative analysis of microstructures formed in highly alloyed aluminum alloy during high-temperature equal-channel angular pressing and multidirectional forging
Sitdikov O.
PDF
(Eng)
Том 10, № 1 (2019)
Effect of Thermal Aging on Deformation Properties of Nitrile-Butadiene Rubber: Atomic Force Microscopy Data
Shadrinov N.
PDF
(Eng)
Том 9, № 4 (2018)
Influence of Physicochemical Characteristics of Tempering Medium and Friction Modes on the Structure and Kinetics of Strengthening and Destruction of Surface Layer of Nickel
Pinchuk V., Korotkevich S., Kovalyov E.
PDF
(Eng)
Том 8, № 4 (2017)
Effect of the grain size on accumulation of scalar density of dislocations and its components in low-alloy Cu–Al
Koneva N., Trishkina L., Cherkasova T., Kozlov E.
PDF
(Eng)
Том 7, № 1 (2016)
Influence of nanoparticles of cesium sulfate and deformation on structure, vibration spectra, and luminescence of polystyrene
Pokidov A., Klassen N., Kedrov V., Shmytko I., Bazhenov A., Fursova T.
PDF
(Eng)
Том 10, № 1 (2019)
Mechanism of the Hydrogen Cracking of Metals and Alloys, Part II (Review)
Sergeev N., Sergeev A., Kutepov S., Kolmakov A., Gvozdev A.
PDF
(Eng)
Том 9, № 4 (2018)
On the Interaction of the Deformation and Photonic Self-Organizations in Condensed Media: Overview
Klassen N., Vasin A., Polyanin K.
PDF
(Eng)
Том 8, № 4 (2017)
Influence of hydrogen embrittlement on the localization of plastic strain in Al–Cu–Mg alloy
Barannikova S., Bochkareva A., Lunev A., Gorbatenko V., Zuev L.
PDF
(Eng)
Том 10, № 6 (2019)
Modeling of Steel Hardening Process at Thermal and Mechanical Treatment
Oryshchenko A., Malyshevsky V., Shumilov E.
PDF
(Eng)
Том 10, № 1 (2019)
Mechanism of the Hydrogen Cracking of Metals and Alloys, Part I (Review)
Sergeev N., Sergeev A., Kutepov S., Kolmakov A., Gvozdev A.
PDF
(Eng)
Том 9, № 3 (2018)
Features of Uniaxial and Biaxial Deformation of the Contact Boundary of Metals during Explosion Welding
Aushev A., Balandina A., Grishin E., Drennov O., Podurets A., Tkachenko M.
PDF
(Eng)
Том 8, № 2 (2017)
Influence of heat treatment parameters on the structure and mechanical properties of a titanium VT6 alloy in the submicrocrystalline state
Ratochka I., Lykova O.
PDF
(Eng)
Том 10, № 4 (2019)
Change in the Microstructure of Ni Alloy Disk Workpieces for Gas Turbine Engines Produced by the HIP + Deformation Method
Shestakova A., Letnikov M., Bakradze M., Bubnov M., Skugorev A.
PDF
(Eng)
Том 10, № 1 (2019)
The Impact of Severe Plastic Deformation on the Microstructure and Physicomechanical Properties of Al–0.4Zr
Mavlyutov A., Latynina T., Murashkin M., Valiev R., Orlova T.
PDF
(Eng)
Том 9, № 2 (2018)
Reverse Schemes of Explosive Cladding of Long-Length Pipe Billets
Malakhov A., Saikov I., Nikolaenko P., Denisov I., Pervukhin L.
PDF
(Eng)
1 - 25 из 31 результатов 1 2 > >> 
Подсказки:
  • Ключевые слова чувствительны к регистру
  • Английские предлоги и союзы игнорируются
  • По умолчанию поиск проводится по всем ключевым словам (агенс AND экспериенцер)
  • Используйте OR для поиска того или иного термина, напр. образование OR обучение
  • Используйте скобки для создания сложных фраз, напр. архив ((журналов OR конференций) NOT диссертаций)
  • Для поиска точной фразы используйте кавычки, напр. "научные исследования"
  • Исключайте слово при помощи знака - (дефис) или оператора NOT; напр. конкурс -красоты или же конкурс NOT красоты
  • Используйте * в качестве версификатора, напр. научн* охватит слова "научный", "научные" и т.д.

Данный сайт использует cookie-файлы

Продолжая использовать наш сайт, вы даете согласие на обработку файлов cookie, которые обеспечивают правильную работу сайта.

О куки-файлах