Informaçao sobre o Autor

Kolmakov, A.

Edição Seção Título Arquivo
Volume 7, Nº 1 (2016) Article Improvement of manufacture technology of nanostructured diamond materials with the use of physicochemical nonequilibrium analysis
Volume 7, Nº 4 (2016) Article Manufacture of composites based on aluminum and shungite under high pressure conditions
Volume 7, Nº 4 (2016) Article Synthesis and tribotechnical properties of composite coatings with PM–DADPE polyimide matrix and fillers of tungsten dichalcogenide nanoparticles upon dry sliding friction
Volume 8, Nº 1 (2017) Article Synthesis and dry sliding behavior of composite coating with (R–OOO)FT polyimide matrix and tungsten disulfide nanoparticle filler
Volume 8, Nº 1 (2017) Article Composite coatings based on A–OOO polyimide and WS2 nanoparticles with enhanced dry sliding characteristics
Volume 8, Nº 1 (2017) Article Formation and investigation of composite material silver–nitinol for medical purposes
Volume 8, Nº 1 (2017) Article On friction of metallic materials with consideration for superplasticity phenomenon
Volume 8, Nº 1 (2017) Article Temperature distribution and structure in the heat-affected zone for steel sheets after laser cutting
Volume 8, Nº 2 (2017) New Methods of Production and Treatment of Materials Production of antifriction composite filler rods based on babbit B83 by extrusion
Volume 8, Nº 4 (2017) Article Application of generalized pascal triangle for description of oscillations of friction forces
Volume 8, Nº 5 (2017) General Purpose Materials Application of the filler composite rods based on the B83 babbit alloy for production of the antifriction coatings by arc welding
Volume 9, Nº 1 (2018) Article Antiwear Properties of Composite Greases “Litol-24–Magnesium Hydrosilicate Particles”
Volume 9, Nº 2 (2018) Materials of Power Engineering and Radiation-Resistant Materials Fatigue Strength of Ferrite-Martensite 12% Chromium Steels EK-181, EP-823 and Vanadium Alloy V–4Ti–4Cr
Volume 9, Nº 3 (2018) Composite Materials Structure and Properties of the B83 Babbit Alloy Based Composite Materials Produced by Extrusion
Volume 9, Nº 4 (2018) Article Effect of Reaction Sintering Conditions on Properties of Ceramics Based on Alumina Oxynitride
Volume 9, Nº 4 (2018) Article Tribotechnical Properties of Composite Material “Aluminum–Carbon Nanofibers” under Friction on Steels 12Kh1 and ShKh15
Volume 9, Nº 4 (2018) Article Formation of Plastic Zones near Spherical Cavity in Hardened Low-Carbon Steels under Conditions of Hydrogen Stress Corrosion
Volume 9, Nº 4 (2018) Article Antifriction Properties of Plasma-Chemical Coatings Based on SiO2 with MoS2 Nanoparticles under Conditions of Spinning Friction on ShKh15 Steel
Volume 9, Nº 4 (2018) Article Influence of the Surface Modification on the Mechanical Properties of NiTi (55.8 wt % Ni) Alloy Wire for Medical Purposes
Volume 10, Nº 1 (2019) Article Mechanism of the Hydrogen Cracking of Metals and Alloys, Part I (Review)
Volume 10, Nº 1 (2019) Article Mechanism of the Hydrogen Cracking of Metals and Alloys, Part II (Review)
Volume 10, Nº 1 (2019) Article Method of Estimation of Mechanical Properties of the Surface Layer of Cutter Elements Made of Polycrystalline Superhard Composites Based on Cubic Boron Nitride
Volume 10, Nº 1 (2019) Article Estimation of Mechanical Properties of Wrapping Polyethylene Films
Volume 10, Nº 2 (2019) General Purpose Materials Effect of Sintering Parameters on the Phase Composition of Ceramic Based on Aluminum Oxynitride
Volume 10, Nº 3 (2019) Composite Materials Technological Parameters of Production and Properties of Babbit-Based Composite Surfacing Rods and Deposited Antifriction Coatings
Volume 10, Nº 4 (2019) Article Mechanical Properties of Titanium Nickelide–Tantalum–Chitosan Composite Material
Volume 10, Nº 4 (2019) Article Production of Optically Transparent Shock-Resisting Ceramics by the Methods of Powder Metallurgy (Review)
Volume 10, Nº 4 (2019) Article Biocompatibility of Biodegradable Polymer Films Based on Poly(lactic-co-glycolic acid) of Various Molecular Weights
Volume 10, Nº 4 (2019) Article Investigation of the Pivoting Friction of ShKh15 Steel over R6M5 and 10R6M5-MP Steel with the Use of Mathematical Modeling
Volume 10, Nº 4 (2019) Article Semiempirical Mathematical Models of the Pivoting Friction of ShKh15 Steel over R6M5 Steel according to the Ball–Plane Scheme with Consideration of Wear

Este site utiliza cookies

Ao continuar usando nosso site, você concorda com o procedimento de cookies que mantêm o site funcionando normalmente.

Informação sobre cookies