| Шығарылым |
Атауы |
Файл |
| Том 9, № 1 (2018) |
On the Problem of Roadmapping of Domestic Arctic Materials Science: Part I |
(Eng)
|
|
Buznik V., Burkovskaya N., Zibareva I., Cherepanin R.
|
| Том 9, № 1 (2018) |
Reinforcement of Brushite Cement Based on α-TCP by Rigid Polylactide Framework |
(Eng)
|
|
Evdokimov P., Fadeeva I., Fomin A., Filippov Y., Kovalkov V., Knotko A., Putlyaev V., Barinov S.
|
| Том 9, № 1 (2018) |
On the Problem of Roadmapping of Domestic Arctic Materials Science: Part II |
(Eng)
|
|
Buznik V., Burkovskaya N., Zibareva I., Cherepanin R.
|
| Том 9, № 1 (2018) |
Gold Nanoparticles: Synthesis, Optical Properties, and Application |
(Eng)
|
|
Ogarev V., Rudoi V., Dement’eva O.
|
| Том 9, № 1 (2018) |
Mechanical Properties of Composite Materials Based on Latex-Impregnated Needle-Punched Nonwoven Fabrics from Fibers of Different Nature |
(Eng)
|
|
Dedov A., Nazarov V.
|
| Том 9, № 1 (2018) |
Improvement of Structure and Properties of Scintillation Composites by Centrifugation |
(Eng)
|
|
Klassen N., Pokidov A., Kedrov V.
|
| Том 9, № 1 (2018) |
Metal-Ceramic Composites Based on Iron Oxide for Low-Consumption Anode during Electrolytic Extraction of Aluminum |
(Eng)
|
|
Kargin Y., Samoilov E., Makarenkov V., Lysenkov A.
|
| Том 9, № 1 (2018) |
Electrically Conductive Inks Based on Polymer Composition for Inkjet Printing |
(Eng)
|
|
Sergeev A., Tameev A., Zolotarevskii V., Vannikov A.
|
| Том 9, № 1 (2018) |
A Vacancy Model of Pore Annihilation During Hot Isostatic Pressing of Single Crystals of Nickel-Base Superalloys |
(Eng)
|
|
Epishin A., Bokstein B., Svetlov I., Fedelich B., Feldmann T., Le Bouar Y., Ruffini A., Finel A., Viguier B., Poquillon D.
|
| Том 9, № 1 (2018) |
Synthesis and Growth of GaSe1 – xSx (x = 0–1) Crystals from Melt. Phase Composition and Properties |
(Eng)
|
|
Kolesnikov N., Borisenko E., Borisenko D., Tereshchenko A., Timonina A.
|
| Том 9, № 1 (2018) |
Gene-Activated Bone Substitute Based on Octacalcium Phosphate and Doped with Magnesium Ions |
(Eng)
|
|
Bozo I., Deev R., Zhuravlyova M., Komlev V., Popov V., Smirnov I., Fedotov A.
|
| Том 9, № 1 (2018) |
Fatigue Behavior of Titanium Alloys under Very High Cycle Fatigue Loading |
(Eng)
|
|
Nikitin A., Shanyavskiy A., Beklemishev N.
|
| Том 9, № 1 (2018) |
Electrochemical Detection of Barrier Layer Removal for Preparation of Anodic Alumina Membranes with High Permeance and Mechanical Stability |
(Eng)
|
|
Pyatkov E., Berekchiyan M., Yeliseyev A., Lukashin A., Petukhov D., Solntsev K.
|
| Том 9, № 1 (2018) |
Composite Coatings Based on Low-Temperature Calcium Phosphates for Intraosseous Implants |
(Eng)
|
|
Barinov S., Ivannikov A., Kalita V., Komlev D., Komlev V., Radyuk A., Smirnov I., Fedotov A.
|
| Том 9, № 1 (2018) |
Synthesis, Structure, and Electrochemical Characteristics of Carbon Inverse Opals |
(Eng)
|
|
Sukhinina N., Masalov V., Zhokhov A., Zverkova I., Liu Q., Wang J., Emelchenko G.
|
| Том 9, № 1 (2018) |
Low-Cycle Fatigue under Controlled Deformation and Fracture of the Superalloy VZh175 |
(Eng)
|
|
Belyayev M., Terentyev V., Gorbovets M., Bakradze M., Antonova O.
|
| Том 9, № 1 (2018) |
New Fibrous Materials Based on Poly-3-Hydroxybutyrate for Biomedical Purposes, Made via Electrospinning Technique |
(Eng)
|
|
Olkhov A., Krutikova A., Goldshtrakh M., Orlov N., Ischenko A., Staroverova O., Iordanskii A.
|
| Том 9, № 1 (2018) |
Preparation and Adhesive Properties of Chromium Oxide Nanolayers |
(Eng)
|
|
Yezhovskiy Y., Dubrovenskii S.
|
| Том 9, № 1 (2018) |
The Influence of Content of Reinforcing Filler on Mechanical Properties of Carbon-Glass Fiber Reinforced Plastics in Matrix T-107 |
(Eng)
|
|
Ovdak O., Kalinin Y., Kudrin A., Karaeva O., Degtyarev D.
|
| Том 9, № 1 (2018) |
Phase Transformations, Strength, and Modulus of Elasticity of Ti–15Mo Alloy Obtained by High-Pressure Torsion |
(Eng)
|
|
Gatina S., Semenova I., Ubyyvovk E., Valiev R.
|
| Том 9, № 1 (2018) |
Physicomechanical Properties of Glacial Composite Materials Reinforced by Rusar-S Fibers |
(Eng)
|
|
Cherepanin R., Nuzhnyi G., Razomasov N., Goncharova G., Buznik V.
|
| Том 8, № 4 (2017) |
Fabrication of nickel–aluminum alloys with tungsten and molybdenum borides by the method of self-propagating high-temperature synthesis |
(Eng)
|
|
Gostishchev V., Astapov I., Khimukhin S.
|
| Том 8, № 4 (2017) |
Nanostructured compacts and composites based on diamond-like boron nitride |
(Eng)
|
|
Filonenko V., Zibrov I., Antanovich A., Anokhin A.
|
| Том 8, № 4 (2017) |
The influence of microadditives of ruthenium on the structure, corrosive-mechanical strength, and fractography of destruction of pseudo-alpha-titanium alloys |
(Eng)
|
|
Leonov V., Chudakov E., Malinkina Y.
|
| Том 8, № 4 (2017) |
Effect of the grain size on accumulation of scalar density of dislocations and its components in low-alloy Cu–Al |
(Eng)
|
|
Koneva N., Trishkina L., Cherkasova T., Kozlov E.
|
| Нәтижелер 263 - 126/150 |
<< < 1 2 3 4 5 6 7 8 9 10 > >>
|
