Мақаланы E-mail арқылы жіберу Effect of Surface Heat Exchange Intensifier Geometry on Heat Transfer Tube Strength
- Авторлар: Popov I.A.1, Shchelchkov A.V.1,2, Aksyanov R.A.1, Skrypnik A.N.1, Isaev S.A.3
-
Мекемелер:
- Tupolev Kazan National Research Technical University
- All-Russia Research Institute of Flow Metering (FGUP VNIIR)
- St. Petersburg University of Civil Aviation
- Шығарылым: Том 62, № 3 (2019)
- Беттер: 373-380
- Бөлім: Structural Mechanics and Strength of Flight Vehicles
- URL: https://journals.rcsi.science/1068-7998/article/view/231015
- DOI: https://doi.org/10.3103/S1068799819030036
- ID: 231015
Дәйексөз келтіру
Ашық рұқсат
Рұқсат берілді
Тек жазылушылар үшін
Аннотация
Experimental studies of the tensile and compression strength as well as the strength at three-point bending of heat exchange tubes with various types of surface intensifiers, were made. The effect of intensifier geometry on sample strength is shown. The ranges of geometric parameters of intensifiers, which provide high-performance characteristics of heat exchange tubes, and possibilities to improve the maintenance reliability, are given.
Негізгі сөздер
Авторлар туралы
I. Popov
Tupolev Kazan National Research Technical University
Email: anskrypnik@kai.ru
Ресей, ul. Karla Marksa 10, Kazan, 420111 Tatarstan
A. Shchelchkov
Tupolev Kazan National Research Technical University; All-Russia Research Institute of Flow Metering (FGUP VNIIR)
Email: anskrypnik@kai.ru
Ресей, ul. Karla Marksa 10, Kazan, 420111 Tatarstan; ul. Vtoraya Azinskaya 7a, Kazan, 420088 Tatarstan
R. Aksyanov
Tupolev Kazan National Research Technical University
Email: anskrypnik@kai.ru
Ресей, ul. Karla Marksa 10, Kazan, 420111 Tatarstan
A. Skrypnik
Tupolev Kazan National Research Technical University
Хат алмасуға жауапты Автор.
Email: anskrypnik@kai.ru
Ресей, ul. Karla Marksa 10, Kazan, 420111 Tatarstan
S. Isaev
St. Petersburg University of Civil Aviation
Email: anskrypnik@kai.ru
Ресей, ul. Pilotov 38, St. Petersburg, 196210
Қосымша файлдар
