Email this article A technique of finite element analysis for co-curing a composite shell with integral metal part
- Authors: Shabalin L.P.1, Khilov P.A.1, Sungatullin R.N.1
-
Affiliations:
- Tupolev Kazan National Research Technical University
- Issue: Vol 59, No 4 (2016)
- Pages: 600-605
- Section: Aircraft Production Technology
- URL: https://journals.rcsi.science/1068-7998/article/view/229935
- DOI: https://doi.org/10.3103/S1068799816040255
- ID: 229935
Cite item
Open Access
Access granted
Subscription Access
Abstract
The paper suggests two techniques for analyzing the hybrid metal-composite shell of revolution co-curing. The techniques provide a possibility to assess the stepwise deflected mode and predict the development of possible defects. These techniques were tested by analyzing a hybrid flow splitter case that consists of carbon shell and titanium edge.
About the authors
L. P. Shabalin
Tupolev Kazan National Research Technical University
Author for correspondence.
Email: pla.kai@mail.ru
Russian Federation, ul. Karla Marksa 10, Kazan, Tatarstan, 420111
P. A. Khilov
Tupolev Kazan National Research Technical University
Email: pla.kai@mail.ru
Russian Federation, ul. Karla Marksa 10, Kazan, Tatarstan, 420111
R. N. Sungatullin
Tupolev Kazan National Research Technical University
Email: pla.kai@mail.ru
Russian Federation, ul. Karla Marksa 10, Kazan, Tatarstan, 420111
