Statistical analysis of stretch shaping process of biconvex skin
- Authors: Mikheev V.A.1, Smol’nikov S.D.1, Surudin S.V.1, Savin D.V.1
-
Affiliations:
- Samara State Aerospace University
- Issue: Vol 59, No 1 (2016)
- Pages: 145-150
- Section: Aircraft Production Technology
- URL: https://journals.rcsi.science/1068-7998/article/view/229629
- DOI: https://doi.org/10.3103/S1068799816010232
- ID: 229629
Cite item
Abstract
The results of shaping process were obtained by the process scheme of serial stretching for biconvex skin of workpieces using the ANSYS/LS-DYNA software. The analysis is based on different flow material characteristics during plastic deformation at solid friction. A statistical analysis of the calculation results for disturbing factors assessment is carried out.
About the authors
V. A. Mikheev
Samara State Aerospace University
Email: ssd34@yandex.ru
Russian Federation, shosse Moskovskoe 34, Samara, 443086
S. D. Smol’nikov
Samara State Aerospace University
Author for correspondence.
Email: ssd34@yandex.ru
Russian Federation, shosse Moskovskoe 34, Samara, 443086
S. V. Surudin
Samara State Aerospace University
Email: ssd34@yandex.ru
Russian Federation, shosse Moskovskoe 34, Samara, 443086
D. V. Savin
Samara State Aerospace University
Email: ssd34@yandex.ru
Russian Federation, shosse Moskovskoe 34, Samara, 443086