The influence of the valena metal-plating additive on tribotechnical characteristics of the Steel–Bronze tribological system


Дәйексөз келтіру

Толық мәтін

Ашық рұқсат Ашық рұқсат
Рұқсат жабық Рұқсат берілді
Рұқсат жабық Тек жазылушылар үшін

Аннотация

The paper considers a change in the coefficient of friction and the temperature distribution in the contact zone of the steel–bronze tribosystem. Investigations were carried out by the shaft–bushing system for three values of the load in the mixed-to-boundary lubrication regime with SAE 80W transmission oil without and with Valena additive. It is found that the additive presence in oil decreases the coefficient of friction by 11–21%, depending on the applied load. At the same time, the maximum decrease in the coefficient of friction is observed at a maximum applied load of 1500 N.

Авторлар туралы

M. Kandeva

Faculty of Industrial Technology

Email: avencl@mas.bg.ac.rs
Болгария, Kliment Ohridski Blvd, 8, Sofia, 1000

D. Karastoyanov

Institute of Information and Communication Technologies

Email: avencl@mas.bg.ac.rs
Болгария, Acad. G. Bonchev str., Block 2, Sofia, 1113

E. Assenova

Society of Bulgarian Tribologists, Tribology Centre

Email: avencl@mas.bg.ac.rs
Болгария, Kliment Ohridski Blvd, 8, Sofia, 1000

K. Jakimovska

Institute of Information and Communication Technologies; Ss. Cyril and Methodius University

Email: avencl@mas.bg.ac.rs
Болгария, Acad. G. Bonchev str., Block 2, Sofia, 1113; Karposh II bb, Skopje, 1000

S. Simeonov

Faculty of Mechanical Engineering

Email: avencl@mas.bg.ac.rs
Чехия, Technická, 2896/2, Brno, 616 69

A. Vencl

Institute of Information and Communication Technologies; University of Belgrade

Хат алмасуға жауапты Автор.
Email: avencl@mas.bg.ac.rs
Болгария, Acad. G. Bonchev str., Block 2, Sofia, 1113; Kraljice Marije 16, Belgrade, 11120

Қосымша файлдар

Қосымша файлдар
Әрекет
1. JATS XML

© Allerton Press, Inc., 2016