| Edição |
Título |
Arquivo |
| Volume 40, Nº 6 (2019) |
Antifriction Properties of Diamond-Like Coating and Titanium Aluminum Nitride in Model Lubricant Media |
(Eng)
|
|
Levchenko V., Buyanovskii I., Samusenko V., Matvienko V., Shcherbakov Y.
|
| Volume 40, Nº 6 (2019) |
Mechanical and Tribological Properties of Polyethylene Terephthalate Track-Etched Membranes after Steam and Radiation Sterilization |
(Eng)
|
|
Filippova E., Pichugin V., Filippov A., Gradoboev A.
|
| Volume 40, Nº 6 (2019) |
Prospects for the Application of Compound Dampers in Turbomachinery Rotors |
(Eng)
|
|
Balyakin V.
|
| Volume 40, Nº 6 (2019) |
The Antifriction Properties of Amorphous Poly(Arylene Ether Ketone) Copolymers with a Low Content of Cardo Groups |
(Eng)
|
|
Goroshkov M., Krasnov A., Shaposhnikova V., Salazkin S., Lyubimova A., Naumkin A., Polunin S., Bykov A.
|
| Volume 40, Nº 6 (2019) |
Abrasive Wear of a Steel Counterbody in Frictional Contact with Pressed Modified Wood |
(Eng)
|
|
Makeyeu V., Vrublevskaya V.
|
| Volume 40, Nº 6 (2019) |
Computer-Aided Design of the Composition of Extrudable Polymer–Polymer UHMWPE Composites with Specified Antifriction and Mechanical Properties |
(Eng)
|
|
Panin S., Bochkareva S., Buslovich D., Kornienko L., Lyukshin B., Panov I., Shil’ko S.
|
| Volume 40, Nº 6 (2019) |
Influence of Copper Frictional Material Composition on Structure and Tribotechnical Properties |
(Eng)
|
|
Leshok A., Dyachkova L., Ilyushchenko A., Rogovoy A., Alekseenko N.
|
| Volume 40, Nº 6 (2019) |
Simulation of Microcontact Interactions during Gas-Abrasive Wearing of Steels with Allowance for Strain Hardening |
(Eng)
|
|
Krupich B., Barsukov V., Sviridenok A.
|
| Volume 40, Nº 6 (2019) |
The Influence of the Roughness of a Steel Counterbody on the Tribological Characteristics of Friction Composites under Friction in Oil |
(Eng)
|
|
Bukharov S., Sergienko V., Grigor’ev A.
|
| Volume 40, Nº 6 (2019) |
Interrelation of Surface Temperature and Tribological Characteristics of a Protective Coating on a Tool |
(Eng)
|
|
H. Al-Ethari ., Al-Dulaimi K., Warcholinski B., Kuznetsova T.
|
| Volume 40, Nº 6 (2019) |
Kinetics of Antifriction Film Formation in Sunflower Oil |
(Eng)
|
|
Boiko M., Kolesnikov I., Boiko T., Bicherov A.
|
| Volume 40, Nº 6 (2019) |
Mathematical Modeling of the Resistance Force of the Profile of a Flat-Back Knife |
(Eng)
|
|
Ageev O., Naumov V., Fatykhov J.
|
| Volume 40, Nº 6 (2019) |
Antifriction Nanocomposite Coatings that Contain Magnesium Carbide |
(Eng)
|
|
Babak V., Shchepetov V., Harchenko S.
|
| Volume 40, Nº 6 (2019) |
The Tribological Properties of Superhard and Functional Coatings Based on Carbide and Boron Nitride |
(Eng)
|
|
Ipatov A., Kharanzhevskiy E.
|
| Volume 40, Nº 6 (2019) |
Calculation of the Friction Coefficient between a Steady Elastic Wheel and a Solid Support Surface in the Presence of a Lateral Force |
(Eng)
|
|
Balakina E.
|
| Volume 40, Nº 6 (2019) |
Calculating the Contact Approach in a Cylinder upon Reindentation |
(Eng)
|
|
Matlin M., Kaunov A., Mozgunova A., Kazankina E., Kazankin V.
|
| Volume 40, Nº 6 (2019) |
The Optimal Design of a Friction Unit with Uniform Contact Pressure |
(Eng)
|
|
Mirsalimov V., Akhundova P.
|
| Volume 40, Nº 6 (2019) |
Use of an Ionic Liquid as an Additive for Environmentally Friendly Lubricants |
(Eng)
|
|
Kazancev K., Kreivaitis R., Radzevičiūtė U., Kupčinskas A.
|
| Volume 40, Nº 6 (2019) |
Rheology of Plastic Lubricants with Additives of Carbon Nanostructures of Various Type |
(Eng)
|
|
Shilov M., Smirnova A., Gvozdev A., Rozhkova N., Dyachkova T., Burkov A., Stolbov D., Savilov S., Usol’tseva N.
|
| Volume 40, Nº 6 (2019) |
The Kinetics of Load-Bearing Capacity Formation of Sliding Pairings in the Use of Nanomodified Lubricants |
(Eng)
|
|
Polyakov S., Kuksenova L., Kuleshova E.
|
| Volume 40, Nº 6 (2019) |
Mechanism Wear of Elastomers with Oblique Impact of Solid Particles in the Aqueous Medium |
(Eng)
|
|
Kopchenkov V.
|
| Volume 40, Nº 5 (2019) |
Abrasive Wear Resistance of High-Speed Steel R6M5 after Laser Melting and Tempering |
(Eng)
|
|
Ratkevich G., Afanasieva L., Smolyakova I., Novoselova M.
|
| Volume 40, Nº 5 (2019) |
Influence of Wear Particles and Reverse Transfer of the Material on Wear Intensity of Aluminum Alloy under Dry Friction on Steel |
(Eng)
|
|
Rusin N., Skorentsev A., Vlasov I.
|
| Volume 40, Nº 5 (2019) |
Interrelation between Tribological and Microstructural Parameters of a Tribomaterial under Cyclic Rolling |
(Eng)
|
|
Savenko V., Karagioz O.
|
| Volume 40, Nº 5 (2019) |
Sclerometric Investigation of the Process Pressure Effect on the Properties of Polyethylene Nanocomposite Surfaces |
(Eng)
|
|
Sviridenok A., Shashura L., Komarovskaya Y., Moiseev D., Barsukov V.
|
| 1 - 25 de 366 resultados |
1 2 3 4 5 6 7 8 9 10 > >>
|
