Enviar artigo por via de e-mail The influence of the valena metal-plating additive on tribotechnical characteristics of the Steel–Bronze tribological system
- Autores: Kandeva M.1, Karastoyanov D.2, Assenova E.3, Jakimovska K.2,4, Simeonov S.5, Vencl A.2,6
-
Afiliações:
- Faculty of Industrial Technology
- Institute of Information and Communication Technologies
- Society of Bulgarian Tribologists, Tribology Centre
- Ss. Cyril and Methodius University
- Faculty of Mechanical Engineering
- University of Belgrade
- Edição: Volume 37, Nº 2 (2016)
- Páginas: 187-190
- Seção: Article
- URL: https://journals.rcsi.science/1068-3666/article/view/228190
- DOI: https://doi.org/10.3103/S1068366616020082
- ID: 228190
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
The paper considers a change in the coefficient of friction and the temperature distribution in the contact zone of the steel–bronze tribosystem. Investigations were carried out by the shaft–bushing system for three values of the load in the mixed-to-boundary lubrication regime with SAE 80W transmission oil without and with Valena additive. It is found that the additive presence in oil decreases the coefficient of friction by 11–21%, depending on the applied load. At the same time, the maximum decrease in the coefficient of friction is observed at a maximum applied load of 1500 N.
Palavras-chave
Sobre autores
M. Kandeva
Faculty of Industrial Technology
Email: avencl@mas.bg.ac.rs
Bulgária, Kliment Ohridski Blvd, 8, Sofia, 1000
D. Karastoyanov
Institute of Information and Communication Technologies
Email: avencl@mas.bg.ac.rs
Bulgária, Acad. G. Bonchev str., Block 2, Sofia, 1113
E. Assenova
Society of Bulgarian Tribologists, Tribology Centre
Email: avencl@mas.bg.ac.rs
Bulgária, Kliment Ohridski Blvd, 8, Sofia, 1000
K. Jakimovska
Institute of Information and Communication Technologies; Ss. Cyril and Methodius University
Email: avencl@mas.bg.ac.rs
Bulgária, Acad. G. Bonchev str., Block 2, Sofia, 1113; Karposh II bb, Skopje, 1000
S. Simeonov
Faculty of Mechanical Engineering
Email: avencl@mas.bg.ac.rs
Tchéquia, Technická, 2896/2, Brno, 616 69
A. Vencl
Institute of Information and Communication Technologies; University of Belgrade
Autor responsável pela correspondência
Email: avencl@mas.bg.ac.rs
Bulgária, Acad. G. Bonchev str., Block 2, Sofia, 1113; Kraljice Marije 16, Belgrade, 11120
Arquivos suplementares
