检索

期
标题
作者
卷 2016, 编号 13 (2016)
Manufacture of parts from a titanium alloy under superplasticity conditions
Vargasov N., Radkevich M.
PDF
(Eng)
卷 2019, 编号 10 (2019)
Effect of Alloying Elements on the Hardening of Die Steels in the Austenitic State during High-Temperature Plastic Deformation
Kruglyakov A.
PDF
(Eng)
卷 2019, 编号 4 (2019)
Strain Accumulated during Equal-Channel Angular Pressing and Its Components
Utyashev F., Valiev R., Raab G., Galimov A.
PDF
(Eng)
卷 2017, 编号 3 (2017)
Technique of determining the parameters of rapid strengthening of an aluminum alloy during hot rolling
Loginov Y., Golovnin M.
PDF
(Eng)
卷 2019, 编号 4 (2019)
Plastic Flow Localization and Strain Hardening of Metals
Zuev L., Lunev A., Barannikova S., Staskevich O.
PDF
(Eng)
卷 2017, 编号 1 (2017)
Technique for simulating high-cycle rolling to produce metallic materials reinforced by particles
Galkin V., Evseev P., Paltievich A.
PDF
(Eng)
卷 2019, 编号 11 (2019)
Effect of the Deformation during Pressure Welding of a Wrought EP975 Nickel Alloy and a Single-Crystal Intermetallic VKNA-25 Alloy on the Structure and Properties of the Welded Joints
Drozdov A., Povarova K., Valitov V., Bazyleva O., Galieva E., Bulakhtina M., Arginbaeva E.
PDF
(Eng)
卷 2018, 编号 11 (2018)
Structure and Properties of the Solid-Phase Joints of a Wrought EP975 Nickel Alloy and a Single-Crystal Intermetallic VKNA-25 Alloy Formed by Pressure Welding at a Strain of 24% under the Superplasticity of the EP975 Alloy
Galieva E., Povarova K., Drozdov A., Valitov V.
PDF
(Eng)
卷 2018, 编号 4 (2018)
On the Theory of Isothermal Hot Rolling of an Aluminum Alloy Strip
Rudskoi A., Kodzhaspirov G., Kitaeva D., Rudaev Y., Subbotina E.
PDF
(Eng)
卷 2016, 编号 10 (2016)
TRIP effect in austenitic–martensitic VNS9-Sh steel at various strain rates
Terent’ev V., Slizov A., Prosvirnin D.
PDF
(Eng)
卷 2019, 编号 10 (2019)
Estimation of the Local State of Stress and Strains in Stress Concentration Zones in a Wide Strain Range
Makhutov N., Reznikov D.
PDF
(Eng)
卷 2017, 编号 9 (2017)
Refinement of the technique of plotting the flow curves of a metal to predict its hardening in alternating cold plastic deformation
Shelest A., Yusupov V., Perkas M., Sheftel’ E., Akopyan K., Prosvirnin V.
PDF
(Eng)
卷 2019, 编号 10 (2019)
Cross Hardening of a Shape Memory Alloy during Compression
Movchan A., Kazarina S., Sil’chenko A.
PDF
(Eng)
卷 2017, 编号 4 (2017)
Effect of the strain rate on the mechanical properties of a sheet TRIP steel with a high martensite content
Eliseev E., Terent’ev V., Voznesenskaya N., Slizov A., Sirotinkin V., Baikin A., Seval’nev G.
PDF
(Eng)
卷 2019, 编号 10 (2019)
Possibility to Describe the Alternating and Nonmonotonic Time Dependence of Poisson’s Ratio during Creep Using a Nonlinear Maxwell-Type Viscoelastoplasticity Model
Khokhlov A.
PDF
(Eng)
卷 2017, 编号 4 (2017)
Method for calculating the limiting technological residual stresses in a tubular billet
Kolmogorov G., Kuznetsova E.
PDF
(Eng)
卷 2019, 编号 4 (2019)
Effect of a Structure and Test Conditions on the Critical Strains and Stresses in Titanium Nickelide-Based Alloys
Gusev D., Kollerov M., Vinogradov R.
PDF
(Eng)
卷 2017, 编号 3 (2017)
Producing of ultrafine grained composites with a large uniform elongation by twist extrusion: Mathematical simulation
Prokof’eva O., Beygelzimer Y., Kulagin R., Estrin Y., Varyukhin V.
PDF
(Eng)
1 - 18 的 18 信息

检索提示:

  • 检索的名词区分大小写
  • 常用字词将被忽略
  • 默认情况下只有在查询结果满足所有检索词才返回（例如，隐含AND）
  • 使用OR结合多个检索词，便于查找含有这些检索词的文章，例如education OR research
  • 使用括号来创建更复杂的查询; 例如：archive ((journal OR conference) NOT theses)
  • 使用引号检索一个完整的词组; 例如： "open access publishing"
  • 使用-或者NOT排除一个检索词; 例如：online -politics or online NOT politics
  • 在检索词里使用 *作为通配符匹配任何字符序列; 例如., soci* morality 将符合含有 "sociological" or "societal"的词语
##common.cookie##