检索

标题
作者
Structure and Tribological Properties of the Wear-Resistant Coatings Deposited Using Flux-Cored Wires Modified by Tantalum and Tungsten
Vinokurov G., Vasil’eva M., Kychkin A., Moskvitina L.
Structure and Electroerosion Resistance of the Ag–CuO Coating Prepared by Electroexplosive Sputtering on Copper Electrical Contacts
Romanov D., Moskovskii S., Gromov V., Sosnin K., Filyakov A.
Effect of Temperature on the Low-Cycle Fatigue Characteristics of Single Crystals Made of an Ni3Al-Based Rhenium-Containing Intermetallic Alloy
Povarova K., Bazyleva O., Gorbovets M., Drozdov A., Bulakhtina M.
Effect of a Thermomechanical Action on the Structure and the Mechanical Properties of the Welded Joints of a Hot-Rolled Austenitic Nitrogen-Bearing Steel
Kostina M., Kostina V., Muradyan S.
Development of a Commercial Technology for Plasma Arc Remelting of a Nitrogen-Bearing 05Kh21AG15N8MF Steel
Sisev A., Tsimerman S., Kostina M., Il’inskii A., Perkas M., Rigina L.
Structure and Tribological Properties of B83 Babbit–Based Composite Rods and the Coatings Produced from Them by Arc Surfacing
Bolotova L., Kalashnikov I., Kobeleva L., Katin I., Kolmakov A., Mikheev R., Kobernik N., Podymova N.
Directional Solidification, Structure, and Mechanical Properties of a Eutectic Nb–Si Alloy with a Natural Composite Structure for GTE Blades
Bondarenko Y., Echin A., Kolodyazhnyi M., Narskii A.
Structural heat-resistant β-NiAl + γ′-Ni3Al alloys of the Ni–Al–Co system: II. Oxidation
Povarova K., Drozdov A., Bazyleva O., Morozov A., Antonova A., Arginbaeva E., Alad’ev N., Sirotinkin V.
Effect of deformation and heat treatment on the structure, the mechanical properties, and the fracture characteristics of an ultrafine-grained Zr–1Nb alloy
Vinokurov V., Grabovetskaya G., Stepanova E., Mishin I.
Electron-beam deposition of chromium carbide–based coatings with an ultradispersed structure or a nanostructure
Poletika I., Ivanov S., Gnyusov S., Perovskaya M.
Structure and Mechanical Properties of the Molybdenum–Steel Bimetal Fabricated by Hot Isostatic Pressing
Makhina D., Denisov V., Perminova Y., Butrim V., Nikulin S.
Effect of a Structure and Test Conditions on the Critical Strains and Stresses in Titanium Nickelide-Based Alloys
Gusev D., Kollerov M., Vinogradov R.
Machining of the Ceramic Oxide Coating Formed by Plasma Electrolytic Oxidation
Kuznetsov Y., Kravchenko I., Goncharenko V., Glinskii M.
Structure and Mechanical Properties of High-Strength Structural Steels
Bannykh O., Sorokin A., Bannykh I., Lukin E.
Formation of Gradient Structures in the Zone of Joining a Deformable Nickel Alloy and a Single-Crystal Intermetallic Alloy during Thermodiffusion Pressure Welding and Subsequent Heat Treatment
Povarova K., Valitov V., Drozdov A., Bazyleva O., Galieva E., Arginbaeva E.
Effect of Secondary Melt Refining on the Properties of an EP602 Nickel Superalloy
Tyagunov A., Baryshev E., Tyagunov G., Shmakova K.
Structural heat-resistant β-NiAl + γ′-Ni3Al alloys of the Ni–Al–Co system: I. Solidification and structure
Povarova K., Drozdov A., Bazyleva O., Morozov A., Antonova A., Bondarenko Y., Bulakhtina M., Ashmarin A., Arginbaeva E., Alad’ev N.
Producing of ultrafine grained composites with a large uniform elongation by twist extrusion: Mathematical simulation
Prokof’eva O., Beygelzimer Y., Kulagin R., Estrin Y., Varyukhin V.
Effect of controlled arc motion on the surface of a weldpool on the quality of a weld during argon-arc welding of a 1565chM aluminum alloy
Ovchinnikov V., Drits A., Kurbatova I., Rastopchin R.
Optimization of the Laser Hardening of Punching Tools
Prokhorova A., Bal’kova T.
Structure and Mechanical Properties of the Layered Composites Made of Multicomponent Niobium Alloys and Hardening Silicon–Carbon Compounds Formed by Solid-Phase Sintering
Korzhov V., Kiiko V., Zheltyakova I.
Creep of a Titanium Nickelide-Based Alloy during Torsional Deformation
Gusev D., Kollerov M., Sharonov A., Vinogradov R.
Mechanical Properties and Structure of Grade 1151 Aluminum Alloy Joints Formed by Argon-Arc Welding and Friction Stir Welding
Solov’eva I., Davydenko L., Ovchinnikov V.
Texture, Structure, Mechanical Properties, and Deformability of MA2-1pch Magnesium Alloy Rolled Sheets Preliminarily Subjected to Direct Extrusion or Equal-Channel Angular Pressing and Annealing
Serebryanyi V., Khar’kova M., Luk’yanova E., Karelin F.
Relation between the Crystal Structure of 35KhGF Steel and the Viscous Flow Characteristics of the Forming Melt
V’yukhin V., Chikova O., Borovykh M., Tsepelev V.
51 - 75 的 78 信息 << < 1 2 3 4 > >> 

检索提示:

  • 检索的名词区分大小写
  • 常用字词将被忽略
  • 默认情况下只有在查询结果满足所有检索词才返回(例如,隐含AND)
  • 使用OR结合多个检索词,便于查找含有这些检索词的文章,例如education OR research
  • 使用括号来创建更复杂的查询; 例如:archive ((journal OR conference) NOT theses)
  • 使用引号检索一个完整的词组; 例如: "open access publishing"
  • 使用-或者NOT排除一个检索词; 例如:online -politics or online NOT politics
  • 在检索词里使用 *作为通配符匹配任何字符序列; 例如., soci* morality 将符合含有 "sociological" or "societal"的词语
##common.cookie##