Поиск

Выпуск
Название
Авторы
Том 2019, № 4 (2019)
Structure and Mechanical Properties of Cold-Deformed Galvanized Rolled Sheets for Light Thin-Walled Constructions
Goritskii V., Kulemin A., Silina N.
PDF
(Eng)
Том 2018, № 6 (2018)
Structure and Mechanical Properties of High-Strength Structural Steels
Bannykh O., Sorokin A., Bannykh I., Lukin E.
PDF
(Eng)
Том 2016, № 11 (2016)
Structure of electroexplosive TiC–Ni composite coatings on steel after electron-beam treatment
Romanov D., Goncharova E., Budovskikh E., Gromov V., Ivanov Y., Teresov A., Kazimirov S.
PDF
(Eng)
Том 2019, № 12 (2019)
General Laws and Influence of Various Factors on the Internal Oxidation Mechanism and Kinetics in Alloyed Steels
Korostelev A.
PDF
(Eng)
Том 2019, № 10 (2019)
On the Use of Atomic Force Microscopy in Metallography
Shlyakhova G., Barannikova S., Zuev L.
PDF
(Eng)
Том 2018, № 13 (2018)
Increasing the Wear Resistance of Steels by Multichannel Laser Hardening
Afanas’eva L., Yugov V.
PDF
(Eng)
Том 2018, № 6 (2018)
Development of a Commercial Technology for Plasma Arc Remelting of a Nitrogen-Bearing 05Kh21AG15N8MF Steel
Sisev A., Tsimerman S., Kostina M., Il’inskii A., Perkas M., Rigina L.
PDF
(Eng)
Том 2018, № 3 (2018)
Microstructure and Properties of Graphitized Free-Cutting Steel
Zhang Y., Han J.
PDF
(Eng)
Том 2017, № 10 (2017)
Fracture toughness of as-cast freight bogie solebars after volume–surface quenching
Belov V., Nikitin A., Anikeenko V., Armizonov A., Rogachev S.
PDF
(Eng)
Том 2017, № 6 (2017)
Mechanism and kinetics of reaction diffusion in steels under the conditions of simultaneous external and internal oxidation
Korostelev A.
PDF
(Eng)
Том 2016, № 13 (2016)
Determination of the hardness and the mechanical properties of steel during melting, secondary refining, and continuous casting in an arc-furnace shop
Shishimirov M., Kokhan L.
PDF
(Eng)
Том 2016, № 10 (2016)
Correlation between the granular structure and the mechanical properties of high-nitrogen austenitic 02Kh20AG10N4MFB steel after annealing
Bannykh I.
PDF
(Eng)
Том 2019, № 12 (2019)
Structure-Sensitive Properties of Liquid Steel: Efficacy Evaluation of Its Treatment with Modifiers and Refining Slag
Sheshukov O., Nekrasov I., Konashkov V., Yegiazaryan D.
PDF
(Eng)
Том 2019, № 10 (2019)
Structure and Mechanical Properties of the Molybdenum–Steel Bimetal Fabricated by Hot Isostatic Pressing
Makhina D., Denisov V., Perminova Y., Butrim V., Nikulin S.
PDF
(Eng)
Том 2019, № 4 (2019)
Mechanical Properties and Structure of a VNS9-Sh Steel as Functions of the Tempering Temperature
Terent’ev V., Ashmarin A., Blinova E., Titov D., Blinov V., Slizov A., Seval’neva T.
PDF
(Eng)
Том 2018, № 13 (2018)
Methodology of Analyzing the Causes of Accidental Failure of Pipes Made of Various Steel Grades
Bykova A., Sharipzyanova G., Volgina N., Khlamkova S.
PDF
(Eng)
Том 2018, № 1 (2018)
Application of the Finite Element Method to Reveal the Causes of Loss of Planeness of Hot-Rolled Steel Sheets during Laser Cutting
Garber E., Bolobanova N., Trusov K.
PDF
(Eng)
Том 2017, № 10 (2017)
Evolution of the structure and the phase composition of a bainitic structural steel during plastic deformation
Nikitina E., Glezer A., Ivanov Y., Aksenova K., Gromov V., Kazimirov S.
PDF
(Eng)
Том 2017, № 5 (2017)
Surface stresses in plastically deformed steels by X-ray diffraction
Rozhnov A., Nikulin S., Shchetinin I., Shitkin S., Rogachev S.
PDF
(Eng)
Том 2016, № 12 (2016)
Effect of an atmosphere on the wetting of titanium carbide with liquid low-carbon steel
Chumanov I., Anikeev A.
PDF
(Eng)
Том 2016, № 10 (2016)
Simulation and prediction of the development of dynamic recrystallization during the deformation of low-alloy low-carbon steel blanks
Rudskoi A., Kodzhaspirov G., Kamelin E.
PDF
(Eng)
Том 2019, № 11 (2019)
Nanoindentation Study of the Effect of Low-Temperature Ion Irradiation on the Hardness of a Ferritic–Martensitic EK-181 Steel
Nikitin A., Rogozhkin S., Kulevoi T., Fedin P., Iskandarov N., Kravchuk K., Gladkikh E., Leont’eva-Smirnova M., Mozhanov E.
PDF
(Eng)
Том 2019, № 10 (2019)
Formation of Z-Phase Particles in a Martensitic 9% Cr Steel during Creep at 650°C and Their Influence on the Creep
Fedoseeva A., Nikitin I., Dudova N., Kaibyshev R.
PDF
(Eng)
Том 2019, № 4 (2019)
Effect of Cold Rolling and Subsequent Annealing on the Microstructure and the Microtexture of Austenitic Corrosion-Resistant Steels
Odnobokova M., Belyakov A.
PDF
(Eng)
Том 2018, № 13 (2018)
Choice of a Medium for the Heat Treatment of Steels and Alloys
Pomel’nikova A., Fetisov G.
PDF
(Eng)
1 - 25 из 81 результатов 1 2 3 4 > >> 
Подсказки:
  • Ключевые слова чувствительны к регистру
  • Английские предлоги и союзы игнорируются
  • По умолчанию поиск проводится по всем ключевым словам (агенс AND экспериенцер)
  • Используйте OR для поиска того или иного термина, напр. образование OR обучение
  • Используйте скобки для создания сложных фраз, напр. архив ((журналов OR конференций) NOT диссертаций)
  • Для поиска точной фразы используйте кавычки, напр. "научные исследования"
  • Исключайте слово при помощи знака - (дефис) или оператора NOT; напр. конкурс -красоты или же конкурс NOT красоты
  • Используйте * в качестве версификатора, напр. научн* охватит слова "научный", "научные" и т.д.

Данный сайт использует cookie-файлы

Продолжая использовать наш сайт, вы даете согласие на обработку файлов cookie, которые обеспечивают правильную работу сайта.

О куки-файлах