Pesquisa

Edição
Título
Autores
Volume 2016, Nº 11 (2016)
Structure of electroexplosive TiC–Ni composite coatings on steel after electron-beam treatment
Romanov D., Goncharova E., Budovskikh E., Gromov V., Ivanov Y., Teresov A., Kazimirov S.
PDF
(Eng)
Volume 2019, Nº 4 (2019)
Structure and Mechanical Properties of Cold-Deformed Galvanized Rolled Sheets for Light Thin-Walled Constructions
Goritskii V., Kulemin A., Silina N.
PDF
(Eng)
Volume 2018, Nº 6 (2018)
Structure and Mechanical Properties of High-Strength Structural Steels
Bannykh O., Sorokin A., Bannykh I., Lukin E.
PDF
(Eng)
Volume 2019, Nº 11 (2019)
Nanoindentation Study of the Effect of Low-Temperature Ion Irradiation on the Hardness of a Ferritic–Martensitic EK-181 Steel
Nikitin A., Rogozhkin S., Kulevoi T., Fedin P., Iskandarov N., Kravchuk K., Gladkikh E., Leont’eva-Smirnova M., Mozhanov E.
PDF
(Eng)
Volume 2019, Nº 10 (2019)
Formation of Z-Phase Particles in a Martensitic 9% Cr Steel during Creep at 650°C and Their Influence on the Creep
Fedoseeva A., Nikitin I., Dudova N., Kaibyshev R.
PDF
(Eng)
Volume 2019, Nº 4 (2019)
Effect of Cold Rolling and Subsequent Annealing on the Microstructure and the Microtexture of Austenitic Corrosion-Resistant Steels
Odnobokova M., Belyakov A.
PDF
(Eng)
Volume 2018, Nº 13 (2018)
Choice of a Medium for the Heat Treatment of Steels and Alloys
Pomel’nikova A., Fetisov G.
PDF
(Eng)
Volume 2018, Nº 5 (2018)
Structural-Phase Transitions in Cold-Resistant Low-Carbon Martensitic Steels Susceptible to Structural Heredity
Berezin S., Shatsov A., Greben’kov S., Spivak L.
PDF
(Eng)
Volume 2018, Nº 1 (2018)
Relation between the Crystal Structure of 35KhGF Steel and the Viscous Flow Characteristics of the Forming Melt
V’yukhin V., Chikova O., Borovykh M., Tsepelev V.
PDF
(Eng)
Volume 2017, Nº 10 (2017)
Influence of the tempering temperature on the mechanical properties and the phase composition of thin sheet TRIP steel
Terent’ev V., Eliseev E., Matyunin V., Slizov A., Marchenkov A., Sirotinkin V., Baikin A., Seval’nev G.
PDF
(Eng)
Volume 2017, Nº 4 (2017)
Effect of the strain rate on the mechanical properties of a sheet TRIP steel with a high martensite content
Eliseev E., Terent’ev V., Voznesenskaya N., Slizov A., Sirotinkin V., Baikin A., Seval’nev G.
PDF
(Eng)
Volume 2016, Nº 12 (2016)
Effect of a secondary metallurgy technology on the types of forming nonmetallic inclusions and the corrosion resistance of steel
Dub V., Safronov A., Movchan M., Ioffe A., Tazetdinov V., Zhivykh G.
PDF
(Eng)
Volume 2016, Nº 10 (2016)
TRIP effect in austenitic–martensitic VNS9-Sh steel at various strain rates
Terent’ev V., Slizov A., Prosvirnin D.
PDF
(Eng)
Volume 2019, Nº 11 (2019)
Influence of Sulfur on the Plasma Decarburization and Desulfurization of Corrosion-Resistant Steels
Grigorovich K., Komolova O., Rumyantsev B.
PDF
(Eng)
Volume 2019, Nº 9 (2019)
Effect of Preliminary Hydroabrasive Cutting on the Imperfection of Welded Joints and Their Mechanical Properties
Tabatchikova T., Morozova A., Gudnev N.
PDF
(Eng)
Volume 2019, Nº 2 (2019)
Corrosion of Various Types of Stainless Steel in Chloroaluminate Melts
Karpov V., Abramov A., Dedov K., Shak A., Zhilyakov A., Polovov I., Belikov S., Rebrin O.
PDF
(Eng)
Volume 2018, Nº 12 (2018)
Electromagnetic Mixing of the Liquid Metal in DC Arc Furnaces
Krutyanskii M., Nekhamin S., Mitrofanov M.
PDF
(Eng)
Volume 2018, Nº 5 (2018)
Thermodynamic Simulation of the Influence of the Temperature and the Basicity of a Boron-Containing Slag on Steel Desulfurization
Salina V., Sychev A., Zhuchkov V., Leont’ev L., Babenko A.
PDF
(Eng)
Volume 2018, Nº 9 (2018)
Structure and Properties of the Metal in the Laser Welding Joints of an Austenitic Steel Containing ~0.5% N in the As-Cast and Deformed States
Kostina V., Kostina M., Voronchuk S., Muradyan S., Rigina L.
PDF
(Eng)
Volume 2017, Nº 10 (2017)
Estimation of the notch sensitivity of a nitrided steel by acoustic emission
Rogachev S., Nikulin S., Khatkevich V., Ozherelkov D., Molyarov A.
PDF
(Eng)
Volume 2017, Nº 4 (2017)
Acoustic emission analysis of the stages of deformation of TRIP steel
Penkin A., Terent’ev V., Roshchupkin V., Slizov A., Sirotinkin V.
PDF
(Eng)
Volume 2016, Nº 10 (2016)
Structure and mechanical properties of austenitic 316L steel produced by selective laser melting
Kuznetsov P., Zisman A., Petrov S., Goncharov I.
PDF
(Eng)
Volume 2019, Nº 13 (2019)
Selective Laser Melting of Corrosion-Resistant Steel
Ratkevich G., Zhdanov A., Belyaev L., Yugov V., Afanas’eva L.
PDF
(Eng)
Volume 2019, Nº 10 (2019)
Causes and Mechanisms of Fracture of a Main Line Section Made of 17G1S Steel
Goritskii V., Shneiderov G., Durneva A.
PDF
(Eng)
Volume 2019, Nº 6 (2019)
Steel Semiproduct Melting Intensification in Electric Arc Furnaces Using Coordinated Control of Electric and Gas Conditions: II. On-Line Control of the State of the Charge and Melt Zones in Electric Arc Furnaces
Sivtsov A., Sheshukov O., Tsymbalist M., Nekrasov I., Makhnutin A., Egiazar’yan D., Orlov P.
PDF
(Eng)
1 - 25 de 81 resultados 1 2 3 4 > >> 
Dicas:
  • Palavras-chave são sensíveis a maiúsculas
  • Preposições e conjunções ingleses são ignoradas
  • Busca é feita por todos os palavras-chave (agente AND experimentador) por omissão
  • Use OR para pesquisar um termo exato, ex.: educação OR formação
  • Use parênteses para criar frases complexas, ex.: arquivo de ((revistas OR conferências) NOT teses)
  • Para pesquisar uma frase precisa use aspas duplas, ex.: "investigações científicas"
  • Exclua uma palavra utilizando o sinal - (hífen) ou operador NOT; ex.: concurso-de beleza ou concurso NOT de beleza
  • Use * como caractere-coringa, ex.: científic* recuperará as palavras "científico", "científicos", etc.

Este site utiliza cookies

Ao continuar usando nosso site, você concorda com o procedimento de cookies que mantêm o site funcionando normalmente.

Informação sobre cookies