Pesquisa

Edição
Título
Autores
Volume 2019, Nº 13 (2019)
Phase States of Carbon, Oxygen, Sulfur, Phosphorus, Silicon, and Lead Impurities. Thermodynamics of Formation and Kinetics of Removal of the Impurities in a Cast ZhS36-VI Nickel Superalloy
Kablov D., Simonov V., Simonov N.
PDF
(Eng)
Volume 2019, Nº 3 (2019)
Carbothermic Reduction of Metals in the FeS–Cu1.96S–CaO System
Selivanov E., Gulyaeva R.
PDF
(Eng)
Volume 2018, Nº 4 (2018)
Phase Composition and Magnetic Properties of Nd2Fe14B/α-Fe Nanocomposites Prepared by Mechanical Alloying
Savchenko A., Menushenkov V., Plastinin A., Shchetinin I., Rafal’skii A., Bordyuzhin I., Ryazantsev V., Verbetskii V.
PDF
(Eng)
Volume 2017, Nº 10 (2017)
Influence of the tempering temperature on the mechanical properties and the phase composition of thin sheet TRIP steel
Terent’ev V., Eliseev E., Matyunin V., Slizov A., Marchenkov A., Sirotinkin V., Baikin A., Seval’nev G.
PDF
(Eng)
Volume 2016, Nº 11 (2016)
Properties of a 45Ti–45Ni–10Nb shape memory alloy in the as-cast and pressed states
Popov N., Sysoeva T., Aushev A., Lar’kin V., Kostyleva A.
PDF
(Eng)
Volume 2019, Nº 12 (2019)
General Laws and Influence of Various Factors on the Internal Oxidation Mechanism and Kinetics in Alloyed Steels
Korostelev A.
PDF
(Eng)
Volume 2019, Nº 3 (2019)
Corrosion Resistance of Some Amorphous Metallic Fe–P–M (M = Si, Nb, Mo) Alloys: Effects of Composition, Structural Relaxation, Partial Crystallization, and Local Deformation
Ievlev V., Il’inova T., Kannykin S., Bobrinskaya E., Vavilova V., Serikov D., Kushchev S.
PDF
(Eng)
Volume 2018, Nº 1 (2018)
Effect of Some Impurities on the Structure, the Phase Composition, and the Properties of Magnesium Alloys Containing Rare-Earth Elements
Volkova E., Mostyaev I.
PDF
(Eng)
Volume 2017, Nº 8 (2017)
Kinetics of electrolysis current reversal boriding of tool steels in a boron-containing oxychloride melt based on CaCl2
Chernov Y., Filatov E.
PDF
(Eng)
Volume 2019, Nº 11 (2019)
A Study of the Magnetic Characteristics of Cu–Mn–Bi Alloys
Samoilova O., Trofimov E., Geraskin V.
PDF
(Eng)
Volume 2019, Nº 1 (2019)
Some Features of the Nickel Passivation Mechanism during Direct Current Polarization in Sulfuric Acid Solutions
Bryukvin V., Skryleva E., Levin A., Kuznetsova O., Naftal’ M., Bol’shikh A.
PDF
(Eng)
Volume 2018, Nº 9 (2018)
Composite Membranes Based on Pd–Cu and Pd–Pb Solid Solutions
Ievlev V., Dontsov A., Novikov V., Sinetskaya D., Gorbunov S., Roshan N., Burkhanov G.
PDF
(Eng)
Volume 2017, Nº 7 (2017)
Structure and properties of the layer deposited onto a low-carbon steel and then irradiated by an electron beam
Kormyshev V., Gromov V., Ivanov Y., Konovalov S., Teresov A.
PDF
(Eng)
Volume 2019, Nº 11 (2019)
Effect of Additional Hydrogen Alloying on the Structure and the Phase Composition of a VTI-4 Intermetallic Alloy
Skvortsova S., Pozhoga O., Pozhoga V., Ivanov A.
PDF
(Eng)
Volume 2019, Nº 1 (2019)
Comparative Analysis of the Ternary Al–Si–X and Al–Cu–X (X = Sn, Pb, Bi, Cd, In) Systems in the Aluminum Alloy Range
Yakovleva O., Belov N.
PDF
(Eng)
Volume 2018, Nº 7 (2018)
Effect of the Thermomechanical Treatment Conditions on the Consolidation, the Structure, and the Mechanical Properties of Bulk Al–Mg–C Nanocomposites
Aborkin A., Alymov M., Sobol’kov A., Khor’kov K., Babin D.
PDF
(Eng)
Volume 2017, Nº 6 (2017)
Mechanism and kinetics of reaction diffusion in steels under the conditions of simultaneous external and internal oxidation
Korostelev A.
PDF
(Eng)
Volume 2019, Nº 10 (2019)
Effect of the Martensite Content on the Mechanical Behavior and the Acoustic Emission Characteristics of a Sheet TRIP Steel during Static Tension
Teren’tev V., Roshchupkin V., Penkin A., Penkin M.
PDF
(Eng)
Volume 2018, Nº 13 (2018)
Methodology of Analyzing the Causes of Accidental Failure of Pipes Made of Various Steel Grades
Bykova A., Sharipzyanova G., Volgina N., Khlamkova S.
PDF
(Eng)
Volume 2017, Nº 13 (2017)
Optimization of the Component Compositions in a Composite Material Made of Mechanically Alloyed Cu-Al-O-C Granules and a Copper-Based Binder
Dovydenkov V., Dovydenkova A., Yarmolyk M., Fetisov G.
PDF
(Eng)
Volume 2017, Nº 4 (2017)
Effect of the strain rate on the mechanical properties of a sheet TRIP steel with a high martensite content
Eliseev E., Terent’ev V., Voznesenskaya N., Slizov A., Sirotinkin V., Baikin A., Seval’nev G.
PDF
(Eng)
Volume 2019, Nº 7 (2019)
Formation of Gradient Structure–Phase States in the Surface Layers of 100-m Differentially Quenched Rails
Gromov V., Yur’ev A., Ivanov Y., Morozov K., Konovalov S., Peregudov O.
PDF
(Eng)
Volume 2018, Nº 6 (2018)
Development of a Process for Melting Cast High-Temperature Alloys Using Refined Wastes
Kabanov I., Murueva A., Topilina T., Vlasov S.
PDF
(Eng)
Volume 2017, Nº 13 (2017)
Optimization of the Technological Synthesis of Refractory Compounds
Gaidar S., Karelina M., Prikhod’ko V., Volkov A.
PDF
(Eng)
Volume 2017, Nº 3 (2017)
Interaction of niobium and tungsten monocarbides in molten copper
Bodrova L., Fedorova O., Shubin A., Pastukhov E.
PDF
(Eng)
1 - 25 de 35 resultados 1 2 > >> 
Dicas:
  • Palavras-chave são sensíveis a maiúsculas
  • Preposições e conjunções ingleses são ignoradas
  • Busca é feita por todos os palavras-chave (agente AND experimentador) por omissão
  • Use OR para pesquisar um termo exato, ex.: educação OR formação
  • Use parênteses para criar frases complexas, ex.: arquivo de ((revistas OR conferências) NOT teses)
  • Para pesquisar uma frase precisa use aspas duplas, ex.: "investigações científicas"
  • Exclua uma palavra utilizando o sinal - (hífen) ou operador NOT; ex.: concurso-de beleza ou concurso NOT de beleza
  • Use * como caractere-coringa, ex.: científic* recuperará as palavras "científico", "científicos", etc.

Este site utiliza cookies

Ao continuar usando nosso site, você concorda com o procedimento de cookies que mantêm o site funcionando normalmente.

Informação sobre cookies