| Edição |
Título |
Arquivo |
| Volume 2017, Nº 11 (2017) |
Heat Treatment of Tantalum and Niobium Powders Prepared by Magnesium-Thermic Reduction |
(Eng)
|
|
Orlov V., Prokhorova T.
|
| Volume 2017, Nº 11 (2017) |
Structure and Mechanical and Corrosion Properties of a Magnesium Mg–Y–Nd–Zr Alloy after High Pressure Torsion |
(Eng)
|
|
Lukyanova E., Martynenko N., Serebryany V., Belyakov A., Rokhlin L., Dobatkin S., Estrin Y.
|
| Volume 2017, Nº 11 (2017) |
Effect of Barothermal Treatment on the Structure and the Mechanical Properties of a High-Strength Eutectic Al–Zn–Mg–Cu–Ni Aluminum Alloy |
(Eng)
|
|
Akopyan T., Padalko A., Belov N., Karpova Z.
|
| Volume 2017, Nº 11 (2017) |
Structural Changes in the Vanadium Sample Surface Induced by Pulsed High-Temperature Deuterium Plasma and Deuterium Ion Fluxes |
(Eng)
|
|
Borovitskaya I., Pimenov V., Gribkov V., Padukh M., Bondarenko G., Gaidar A., Paramonova V., Morozov E.
|
| Volume 2017, Nº 11 (2017) |
Development of a Single-Crystal Fifth-Generation Nickel Superalloy |
(Eng)
|
|
Petrushin N., Elyutin E., Visik E., Golynets S.
|
| Volume 2017, Nº 11 (2017) |
Effect of Exogenous Zirconia Nanophases on the Structural Properties of the Sulfur- and Tin-Containing Nickel Melts |
(Eng)
|
|
Anuchkin S.
|
| Volume 2017, Nº 11 (2017) |
Volume and Surface Properties of a Bismuth-Containing Separating Nickel Melt |
(Eng)
|
|
Filippov K.
|
| Volume 2017, Nº 11 (2017) |
Electrochemical Behavior of an Amorphous and Nanocrystalline Fe79P13Si5V3 Alloy in a Damp SO2-Contaminated Atmosphere |
(Eng)
|
|
Vavilova V., Korneev V., Gavrilov D., Anosova M.
|
| Volume 2017, Nº 11 (2017) |
Effect of Alloying on the Strength Properties and the Hardening Mechanisms of Nitrogen-Bearing Austenitic Steels after Hot Deformation and Annealing |
(Eng)
|
|
Bannykh I.
|
| Volume 2017, Nº 11 (2017) |
Effect of the Initial State of a Steel 38KhN3MFA Billet on the Microstructure and the Mechanical Properties of Seamless Pipes |
(Eng)
|
|
Vorob’ev R., Dubinskii V., Sorokina S.
|
| Volume 2017, Nº 11 (2017) |
Formation of Titanium Boride in the Surface Layer of an Iron–Carbon Alloy Casting |
(Eng)
|
|
Ovcharenko P., Leshchev A., Chekmyshev K., Makhneva T.
|
| Volume 2017, Nº 11 (2017) |
Relation between the Hardness and the Strength of Gray Cast Iron with Allowance for the Structural Parameters |
(Eng)
|
|
Baron A., Palatkina L.
|
| Volume 2017, Nº 11 (2017) |
Estimation of the Ultimate Tensile Strength of Steel from Its HB and HV Hardness Numbers and Coercive Force |
(Eng)
|
|
Sandomirskii S.
|
| Volume 2017, Nº 11 (2017) |
Study of the Electronic Properties of Liquid Metals Using Acoustic Data |
(Eng)
|
|
Tekuchev V., Kalinkin D., Ivanova I.
|
| Volume 2017, Nº 9 (2017) |
Distribution of the mechanical properties of semiproducts over their volume predicted as function of the technological parameters of hot metal forming |
(Eng)
|
|
Galkin V., Golovkina M., Paltievich A.
|
| Volume 2017, Nº 9 (2017) |
Application of statistical methods to reveal and remove the causes of welding of coil laps upon annealing of cold-rolled steel strips |
(Eng)
|
|
Garber E., Diligenskii E., Antonov P., Shalaevskii D., Dyatlov I.
|
| Volume 2017, Nº 9 (2017) |
Ordering–separation phase transition: The fate of the existing phase diagrams |
(Eng)
|
|
Ustinovshchikov Y., Kostenkov N.
|
| Volume 2017, Nº 9 (2017) |
Development of the manufacture of billets based on high-strength aluminum alloys |
(Eng)
|
|
Korostelev V., Denisov M., Bol’shakov A., Van Khieu C.
|
| Volume 2017, Nº 9 (2017) |
Structural heat-resistant β-NiAl + γ′-Ni3Al alloys of the Ni–Al–Co system: I. Solidification and structure |
(Eng)
|
|
Povarova K., Drozdov A., Bazyleva O., Morozov A., Antonova A., Bondarenko Y., Bulakhtina M., Ashmarin A., Arginbaeva E., Alad’ev N.
|
| Volume 2017, Nº 9 (2017) |
Structural heat-resistant β-NiAl + γ′-Ni3Al alloys of the Ni–Al–Co system: II. Oxidation |
(Eng)
|
|
Povarova K., Drozdov A., Bazyleva O., Morozov A., Antonova A., Arginbaeva E., Alad’ev N., Sirotinkin V.
|
| Volume 2017, Nº 9 (2017) |
Hot-tearing susceptibility of Al–Zn alloys |
(Eng)
|
|
Bazhenov V., Pikunov M., Safronova A., Tselovalnik Y.
|
| Volume 2017, Nº 9 (2017) |
Effect of the phase composition on the properties of a complex magnesium alloy at temperatures from –70 to +300°C |
(Eng)
|
|
Volkova E., Duyunova V., Mostyaev I.
|
| Volume 2017, Nº 9 (2017) |
Calcium hydride synthesis of Ti–Nb-based alloy powders |
(Eng)
|
|
Kasimtsev A., Shuitsev A., Yudin S., Levinskii Y., Sviridova T., Alpatov A., Novosvetlova E.
|
| Volume 2017, Nº 9 (2017) |
Distribution of deuterium and hydrogen in Zr and Ti foil assemblies under the action of a pulsed deuterium high-temperature plasma |
(Eng)
|
|
Bondarenko G., Volobuev I., Eriskin A., Kobzev A., Nikulin V., Peregudova E., Silin P., Borovitskaya I.
|
| Volume 2017, Nº 9 (2017) |
Atom probe tomography of the evolution of the nanostructure of oxide dispersion strengthened steels under ion irradiation |
(Eng)
|
|
Orlov N., Rogozhkin S., Bogachev A., Korchuganova O., Nikitin A., Zaluzhnyi A., Kozodaev M., Kulevoy T., Kuibeda R., Fedin P., Chalykh B., Lindau R., Hoffmann Y., Möslang A., Vladimirov P.
|
| 226 - 250 de 453 resultados |
<< < 5 6 7 8 9 10 11 12 13 14 > >>
|
