Issue |
Title |
File |
Vol 2017, No 11 (2017) |
Electrochemical Behavior of an Amorphous and Nanocrystalline Fe79P13Si5V3 Alloy in a Damp SO2-Contaminated Atmosphere |
(Eng)
|
Vavilova V.V., Korneev V.P., Gavrilov D.A., Anosova M.O.
|
Vol 2017, No 11 (2017) |
Effect of Alloying on the Strength Properties and the Hardening Mechanisms of Nitrogen-Bearing Austenitic Steels after Hot Deformation and Annealing |
(Eng)
|
Bannykh I.O.
|
Vol 2017, No 11 (2017) |
Effect of the Initial State of a Steel 38KhN3MFA Billet on the Microstructure and the Mechanical Properties of Seamless Pipes |
(Eng)
|
Vorob’ev R.A., Dubinskii V.N., Sorokina S.A.
|
Vol 2017, No 11 (2017) |
Formation of Titanium Boride in the Surface Layer of an Iron–Carbon Alloy Casting |
(Eng)
|
Ovcharenko P.G., Leshchev A.Y., Chekmyshev K.E., Makhneva T.M.
|
Vol 2017, No 11 (2017) |
Relation between the Hardness and the Strength of Gray Cast Iron with Allowance for the Structural Parameters |
(Eng)
|
Baron A.A., Palatkina L.V.
|
Vol 2017, No 11 (2017) |
Estimation of the Ultimate Tensile Strength of Steel from Its HB and HV Hardness Numbers and Coercive Force |
(Eng)
|
Sandomirskii S.G.
|
Vol 2017, No 11 (2017) |
Study of the Electronic Properties of Liquid Metals Using Acoustic Data |
(Eng)
|
Tekuchev V.V., Kalinkin D.P., Ivanova I.V.
|
Vol 2017, No 11 (2017) |
Heat Treatment of Tantalum and Niobium Powders Prepared by Magnesium-Thermic Reduction |
(Eng)
|
Orlov V.M., Prokhorova T.Y.
|
Vol 2017, No 11 (2017) |
Structure and Mechanical and Corrosion Properties of a Magnesium Mg–Y–Nd–Zr Alloy after High Pressure Torsion |
(Eng)
|
Lukyanova E.A., Martynenko N.S., Serebryany V.N., Belyakov A.N., Rokhlin L.L., Dobatkin S.V., Estrin Y.Z.
|
Vol 2017, No 11 (2017) |
Effect of Barothermal Treatment on the Structure and the Mechanical Properties of a High-Strength Eutectic Al–Zn–Mg–Cu–Ni Aluminum Alloy |
(Eng)
|
Akopyan T.K., Padalko A.G., Belov N.A., Karpova Z.A.
|
Vol 2017, No 11 (2017) |
Structural Changes in the Vanadium Sample Surface Induced by Pulsed High-Temperature Deuterium Plasma and Deuterium Ion Fluxes |
(Eng)
|
Borovitskaya I.V., Pimenov V.N., Gribkov V.A., Padukh M., Bondarenko G.G., Gaidar A.I., Paramonova V.V., Morozov E.V.
|
Vol 2017, No 11 (2017) |
Development of a Single-Crystal Fifth-Generation Nickel Superalloy |
(Eng)
|
Petrushin N.V., Elyutin E.S., Visik E.M., Golynets S.A.
|
Vol 2017, No 11 (2017) |
Effect of Exogenous Zirconia Nanophases on the Structural Properties of the Sulfur- and Tin-Containing Nickel Melts |
(Eng)
|
Anuchkin S.N.
|
Vol 2017, No 11 (2017) |
Volume and Surface Properties of a Bismuth-Containing Separating Nickel Melt |
(Eng)
|
Filippov K.S.
|
Vol 2017, No 9 (2017) |
Effect of the phase composition on the properties of a complex magnesium alloy at temperatures from –70 to +300°C |
(Eng)
|
Volkova E.F., Duyunova V.A., Mostyaev I.V.
|
Vol 2017, No 9 (2017) |
Calcium hydride synthesis of Ti–Nb-based alloy powders |
(Eng)
|
Kasimtsev A.V., Shuitsev A.V., Yudin S.N., Levinskii Y.V., Sviridova T.A., Alpatov A.V., Novosvetlova E.E.
|
Vol 2017, No 9 (2017) |
Distribution of deuterium and hydrogen in Zr and Ti foil assemblies under the action of a pulsed deuterium high-temperature plasma |
(Eng)
|
Bondarenko G.G., Volobuev I.V., Eriskin A.A., Kobzev A.P., Nikulin V.Y., Peregudova E.N., Silin P.V., Borovitskaya I.V.
|
Vol 2017, No 9 (2017) |
Atom probe tomography of the evolution of the nanostructure of oxide dispersion strengthened steels under ion irradiation |
(Eng)
|
Orlov N.N., Rogozhkin S.V., Bogachev A.A., Korchuganova O.A., Nikitin A.A., Zaluzhnyi A.G., Kozodaev M.A., Kulevoy T.V., Kuibeda R.P., Fedin P.A., Chalykh B.B., Lindau R., Hoffmann Y., Möslang A., Vladimirov P.
|
Vol 2017, No 9 (2017) |
Effect of slag inclusions on the density and the surface tension of liquid 32G2 and 32G1 steels |
(Eng)
|
Borovykh M.A., Chikova O.A., Tsepelev V.S., V’yukhin V.V.
|
Vol 2017, No 9 (2017) |
Rheological properties and similarity conditions in simulating the upsetting of a titanium alloy VT20 billet: I. Experimental results |
(Eng)
|
Nosov V.K., Ermakov E.I., Nesterov P.A., Shchugorev Y.Y., Zakharov A.S.
|
Vol 2017, No 9 (2017) |
Refinement of the technique of plotting the flow curves of a metal to predict its hardening in alternating cold plastic deformation |
(Eng)
|
Shelest A.E., Yusupov V.S., Perkas M.M., Sheftel’ E.N., Akopyan K.E., Prosvirnin V.V.
|
Vol 2017, No 9 (2017) |
Distribution of the mechanical properties of semiproducts over their volume predicted as function of the technological parameters of hot metal forming |
(Eng)
|
Galkin V.I., Golovkina M.G., Paltievich A.R.
|
Vol 2017, No 9 (2017) |
Application of statistical methods to reveal and remove the causes of welding of coil laps upon annealing of cold-rolled steel strips |
(Eng)
|
Garber E.A., Diligenskii E.V., Antonov P.V., Shalaevskii D.L., Dyatlov I.A.
|
Vol 2017, No 9 (2017) |
Ordering–separation phase transition: The fate of the existing phase diagrams |
(Eng)
|
Ustinovshchikov Y.I., Kostenkov N.V.
|
Vol 2017, No 9 (2017) |
Development of the manufacture of billets based on high-strength aluminum alloys |
(Eng)
|
Korostelev V.F., Denisov M.S., Bol’shakov A.E., Van Khieu C.
|
226 - 250 of 453 Items |
<< < 5 6 7 8 9 10 11 12 13 14 > >>
|