Issue |
Title |
File |
Vol 10, No 3 (2019) |
Features of the Plastic Flow of Sintered Al–12Si–xSn Alloys |
(Eng)
|
Rusin N.M., Skorentsev A.L.
|
Vol 10, No 3 (2019) |
Cold Sintering of Ni–Ag Nanocomposite Particles Produced by Electric Explosion of Wires |
(Eng)
|
Sharipova A.F., Bakina O.V., Lozhkomoev A.S., Glazkova E.A., Pervikov A.V., Svarovskaya N.V., Lerner M.I., Psakhie S.G., Gotman I., Gutmanas E.Y.
|
Vol 10, No 3 (2019) |
Technological Parameters of Production and Properties of Babbit-Based Composite Surfacing Rods and Deposited Antifriction Coatings |
(Eng)
|
Kalashnikov I.E., Kolmakov A.G., Bolotova L.K., Bykov P.A., Kobeleva L.I., Mikheev R.S., Kheifets M.L.
|
Vol 10, No 3 (2019) |
The Effect of Uniaxial Extrusion on the Degree of Reinforcement of Nanocomposites Polyvinyl Chloride/Boron Nitride |
(Eng)
|
Kozlov G.V., Dolbin I.V.
|
Vol 10, No 3 (2019) |
Deformation Stimulated Luminescence of a Composite Produced on the Basis of Polymethylmethacrylate Transparent in the Visible Region and Finely Dispersed Powder of SrAl2O4:(Eu2+, Dy3+) Phosphor |
(Eng)
|
Banishev A.F., Banishev A.A.
|
Vol 10, No 3 (2019) |
Using Nickel Nanopowders with Different Morphologies for Fabrication of Highly Porous Nickel Materials |
(Eng)
|
Zelensky V.A., Ankudinov A.B., Alymov M.I., Rubtsov N.M., Tregubova I.V., Petrakova N.V.
|
Vol 10, No 3 (2019) |
Dielectric Properties of Polyethylene/TiO2 Composites |
(Eng)
|
Magerramov A.M., Kuliev M.M., Ismayilova R.S., Abdullaev R.S.
|
Vol 10, No 3 (2019) |
On Correlation between Powder Dispersity and Hysteresis Characteristics with Regard to Magnets Based on (Sm, Zr)(Co, Cu, Fe)z Alloys |
(Eng)
|
Dormidontov N.A., Burkhanov G.S., Kolchugina N.B., Dormidontov A.G., Milov Y.V.
|
Vol 10, No 3 (2019) |
Metal-Carbon Nanocomposites FeNi/C: Production, Phase Composition, Magnetic Properties |
(Eng)
|
Muratov D.G., Vasilev A.A., Efimov M.N., Karpacheva G.P., Dzidziguri E.L., Chernavskiy P.A.
|
Vol 10, No 3 (2019) |
Formation and Structure Features of the Weld Joints Made by Friction Stir Welding |
(Eng)
|
Chularis A.A., Rzaev R.A., Valisheva A.G.
|
Vol 9, No 3 (2018) |
Nanostructured Composite Materials Based on Al–Mg Alloy Modified with Fullerene C60 |
(Eng)
|
Evdokimov I.A., Perfilov S.A., Pozdnyakov A.A., Blank V.D., Bagramov R.K., Perezhogin I.A., Kulnitsky B.A., Kirichenko A.N., Aksenenkov V.V.
|
Vol 9, No 3 (2018) |
Structure and Properties of the B83 Babbit Alloy Based Composite Materials Produced by Extrusion |
(Eng)
|
Bolotova L.K., Kalashnikov I.E., Kobeleva L.I., Bykov P.A., Katin I.V., Kolmakov A.G., Podymova N.B.
|
Vol 9, No 3 (2018) |
Photoluminescence Features and Mechanoluminescence Mechanism Inherent in Composite Materials Based on a Photopolymerizing Resin and Finely Dispersed Powders of SrAl2O4:(Eu2+,Dy3+) and Sr4Al14O25:(Eu2+,Dy3+,B) luminophores |
(Eng)
|
Banishev A.A., Banishev A.F.
|
Vol 9, No 3 (2018) |
Activated Sintering of Cu-Al2O3 powders |
(Eng)
|
Meilakh A.G., Kontsevoy Y.V., Shubin A.B., Pastukhov E.A., Sipatov I.S.
|
Vol 9, No 3 (2018) |
Spark-Plasma Sintering of Al2O3–Graphene Nanocomposite |
(Eng)
|
Zholnin A.G., Klyatskina E.A., Grigoryev E.G., Salvador M.D., Misochenko A.A., Dobrokhotov P.L., Isaenkova M.G., Sinaysky M.A., Stolyarov V.V.
|
Vol 9, No 3 (2018) |
Features of Uniaxial and Biaxial Deformation of the Contact Boundary of Metals during Explosion Welding |
(Eng)
|
Aushev A.A., Balandina A.N., Grishin E.N., Drennov O.B., Podurets A.M., Tkachenko M.I.
|
Vol 9, No 3 (2018) |
Structure and Magnetic Properties of Nd–Fe–B Magnets Prepared from DyH2-Containing Powder Mixtures |
(Eng)
|
Burkhanov G.S., Kolchugina N.B., Lukin A.A., Koshkidko Y.S., Cwik J., Skotnicova K., Sitnov V.V.
|
Vol 9, No 3 (2018) |
Ignition of Some Powder Mixtures of Metals with Teflon |
(Eng)
|
Vadchenko S.G., Alymov M.I., Saikov I.V.
|
Vol 8, No 3 (2017) |
Production of spherical powders on the basis of group IV metals for additive manufacturing |
(Eng)
|
Kotlyarov V.I., Beshkarev V.T., Kartsev V.E., Ivanov V.V., Gasanov A.A., Yuzhakova E.A., Samokhin A.V., Fadeev A.A., Alekseev N.V., Sinayskiy M.A., Tretyakov E.V.
|
Vol 8, No 3 (2017) |
Structural characteristics of a mechanically alloyed Al–Fe powder composite |
(Eng)
|
Artyukh V.A., Yusupov V.S., Zelensky V.A., Kholin M.S., Fakhurtdinov R.S.
|
Vol 8, No 3 (2017) |
Chromium concentration profiles in vacuum-sintered Fe–Cr–Co alloys |
(Eng)
|
Ustyukhin A.S., Alymov M.I., Krishenik P.M., Levinsky Y.V., Rogachev S.A.
|
Vol 8, No 3 (2017) |
The influence of iron powder cladding with nickel on properties of sintered materials |
(Eng)
|
Meilakh A.G.
|
Vol 7, No 3 (2016) |
Composite granules of tin-based alloy |
(Eng)
|
Kobeleva L.I., Bolotova L.K., Kalashnikov I.E., Katin I.V., Bykov P.A.
|
Vol 7, No 3 (2016) |
Multilayer Mg–Ti-based composites produced by explosion welding: Risk zones |
(Eng)
|
Vlasova A.M., Greenberg B.A., Kuz’min S.V., Lysak V.I.
|
1 - 24 of 24 Items |
|