期 |
标题 |
文件 |
卷 10, 编号 3 (2019) |
Metal-Carbon Nanocomposites FeNi/C: Production, Phase Composition, Magnetic Properties |
(Eng)
|
Muratov D., Vasilev A., Efimov M., Karpacheva G., Dzidziguri E., Chernavskiy P.
|
卷 10, 编号 3 (2019) |
Formation and Structure Features of the Weld Joints Made by Friction Stir Welding |
(Eng)
|
Chularis A., Rzaev R., Valisheva A.
|
卷 10, 编号 3 (2019) |
Features of the Plastic Flow of Sintered Al–12Si–xSn Alloys |
(Eng)
|
Rusin N., Skorentsev A.
|
卷 10, 编号 3 (2019) |
Cold Sintering of Ni–Ag Nanocomposite Particles Produced by Electric Explosion of Wires |
(Eng)
|
Sharipova A., Bakina O., Lozhkomoev A., Glazkova E., Pervikov A., Svarovskaya N., Lerner M., Psakhie S., Gotman I., Gutmanas E.
|
卷 10, 编号 3 (2019) |
Technological Parameters of Production and Properties of Babbit-Based Composite Surfacing Rods and Deposited Antifriction Coatings |
(Eng)
|
Kalashnikov I., Kolmakov A., Bolotova L., Bykov P., Kobeleva L., Mikheev R., Kheifets M.
|
卷 10, 编号 3 (2019) |
The Effect of Uniaxial Extrusion on the Degree of Reinforcement of Nanocomposites Polyvinyl Chloride/Boron Nitride |
(Eng)
|
Kozlov G., Dolbin I.
|
卷 10, 编号 3 (2019) |
Deformation Stimulated Luminescence of a Composite Produced on the Basis of Polymethylmethacrylate Transparent in the Visible Region and Finely Dispersed Powder of SrAl2O4:(Eu2+, Dy3+) Phosphor |
(Eng)
|
Banishev A., Banishev A.
|
卷 10, 编号 3 (2019) |
Using Nickel Nanopowders with Different Morphologies for Fabrication of Highly Porous Nickel Materials |
(Eng)
|
Zelensky V., Ankudinov A., Alymov M., Rubtsov N., Tregubova I., Petrakova N.
|
卷 10, 编号 3 (2019) |
Dielectric Properties of Polyethylene/TiO2 Composites |
(Eng)
|
Magerramov A., Kuliev M., Ismayilova R., Abdullaev R.
|
卷 10, 编号 3 (2019) |
On Correlation between Powder Dispersity and Hysteresis Characteristics with Regard to Magnets Based on (Sm, Zr)(Co, Cu, Fe)z Alloys |
(Eng)
|
Dormidontov N., Burkhanov G., Kolchugina N., Dormidontov A., Milov Y.
|
卷 9, 编号 3 (2018) |
Nanostructured Composite Materials Based on Al–Mg Alloy Modified with Fullerene C60 |
(Eng)
|
Evdokimov I., Perfilov S., Pozdnyakov A., Blank V., Bagramov R., Perezhogin I., Kulnitsky B., Kirichenko A., Aksenenkov V.
|
卷 9, 编号 3 (2018) |
Structure and Properties of the B83 Babbit Alloy Based Composite Materials Produced by Extrusion |
(Eng)
|
Bolotova L., Kalashnikov I., Kobeleva L., Bykov P., Katin I., Kolmakov A., Podymova N.
|
卷 9, 编号 3 (2018) |
Photoluminescence Features and Mechanoluminescence Mechanism Inherent in Composite Materials Based on a Photopolymerizing Resin and Finely Dispersed Powders of SrAl2O4:(Eu2+,Dy3+) and Sr4Al14O25:(Eu2+,Dy3+,B) luminophores |
(Eng)
|
Banishev A., Banishev A.
|
卷 9, 编号 3 (2018) |
Activated Sintering of Cu-Al2O3 powders |
(Eng)
|
Meilakh A., Kontsevoy Y., Shubin A., Pastukhov E., Sipatov I.
|
卷 9, 编号 3 (2018) |
Spark-Plasma Sintering of Al2O3–Graphene Nanocomposite |
(Eng)
|
Zholnin A., Klyatskina E., Grigoryev E., Salvador M., Misochenko A., Dobrokhotov P., Isaenkova M., Sinaysky M., Stolyarov V.
|
卷 9, 编号 3 (2018) |
Features of Uniaxial and Biaxial Deformation of the Contact Boundary of Metals during Explosion Welding |
(Eng)
|
Aushev A., Balandina A., Grishin E., Drennov O., Podurets A., Tkachenko M.
|
卷 9, 编号 3 (2018) |
Structure and Magnetic Properties of Nd–Fe–B Magnets Prepared from DyH2-Containing Powder Mixtures |
(Eng)
|
Burkhanov G., Kolchugina N., Lukin A., Koshkidko Y., Cwik J., Skotnicova K., Sitnov V.
|
卷 9, 编号 3 (2018) |
Ignition of Some Powder Mixtures of Metals with Teflon |
(Eng)
|
Vadchenko S., Alymov M., Saikov I.
|
卷 8, 编号 3 (2017) |
Chromium concentration profiles in vacuum-sintered Fe–Cr–Co alloys |
(Eng)
|
Ustyukhin A., Alymov M., Krishenik P., Levinsky Y., Rogachev S.
|
卷 8, 编号 3 (2017) |
The influence of iron powder cladding with nickel on properties of sintered materials |
(Eng)
|
Meilakh A.
|
卷 8, 编号 3 (2017) |
Production of spherical powders on the basis of group IV metals for additive manufacturing |
(Eng)
|
Kotlyarov V., Beshkarev V., Kartsev V., Ivanov V., Gasanov A., Yuzhakova E., Samokhin A., Fadeev A., Alekseev N., Sinayskiy M., Tretyakov E.
|
卷 8, 编号 3 (2017) |
Structural characteristics of a mechanically alloyed Al–Fe powder composite |
(Eng)
|
Artyukh V., Yusupov V., Zelensky V., Kholin M., Fakhurtdinov R.
|
卷 7, 编号 3 (2016) |
Composite granules of tin-based alloy |
(Eng)
|
Kobeleva L., Bolotova L., Kalashnikov I., Katin I., Bykov P.
|
卷 7, 编号 3 (2016) |
Multilayer Mg–Ti-based composites produced by explosion welding: Risk zones |
(Eng)
|
Vlasova A., Greenberg B., Kuz’min S., Lysak V.
|
1 - 24 的 24 信息 |
|